| This category contains 12 part(s). |
|
| 110 - filler cap |
 |
Monza type cap - polished light alloy finish - internal thread 2" (51mm) x 18 TPI. overall size approx 60mm x 82mm. release button is opposite the hinge under the lid. we also offer part in chrome on |
| £34.00 for 1 each View part »» |
|
| 111 - filler cap |
 |
Monza type cap - polished light alloy OR chrome finish - internal thread 2 1/2" (63mm) x 16 TPI. overall approx 76mm x 100mm overall. release button is opposite the hinge under the lid. we also offer |
| £39.30 for 1 each View part »» |
|
| 112 - filler cap |
|
Monza type cap - polished light alloy finish - internal thread 2 3/4" (70mm) x 16 TPI. measures approx 86mm x 114mm overall. release button is opposite the hinge under the lid. we also offer part in |
| £42.20 for 1 each View part »» |
|
| 113 - filler cap |
 |
Aston type cap - polished light alloy finish -internal thread 2 1/2" (63mm) x 16 TPI. approx 76mm x 115mm overall. release lever stands up slightly at side. also offered in chrome plated finish. |
| £43.10 for 1 each View part »» |
|
| 114 - filler cap |
|
Aston type cap - polished light alloy finish -internal thread 2 3/4" (70mm) x 16 TPI.approx 89mm x 121mm overall. release lever stands up slightly at side. also offered in chrome on brass finish |
| £47.00 for 1 each View part »» |
|
| 115 - filler cap |
|
Aston type 2 - polished light alloy finish - internal thread 3 1/2" BSP (100mm) 3.93" x 11 TPI , approx 122mm x 162mm overall. release lever stands up slightly at side. |
| £102.00 for 1 each View part »» |
|
| 115A - filler cap - with roller catch |
 |
Aston type 2 - polished light alloy finish - internal thread 3 1/2" BSP (100mm) 3.93" x 11 TPI , approx 122mm x 162mm overall. release lever stands up slightly at side roller catch.
original pattern |
| £149.25 for 1 each View part »» |
|
| 968 - filler cap, lever top - Bontempi |
 |
reproduction of Bontempi lever top fillar cap, period fitting to Singer and MG of the 1930's, supplied in chrome plate finish over brass bronze. (fully machined and assembled). internal thread to neck |
| £101.45 for 1 each View part »» |
|
| LIK1 - locking insert for flange funnel |
 |
locking filler cap insert for fitting into flange funnels. note this will NOT fit the 2" cap parts. |
| £18.15 for 1 each View part »» |
|
| CA-805 - petrol can cap - brass |
 |
original brass petrol can cap. |
| £4.00 for 1 each View part »» |
|
| CA844 - screw on cap |
 |
an attractive aluminium screw on cap suitable for either petrol tank or radiator. new old stock. thread approx 58mm by approx 10 TPI. used on competition 500's |
| £10.00 for 1 each View part »» |
|
| CA1431 - Wilmot Breeden locking fuel cap |
 |
locking type Wilmot Breeden chrome plated fuel filler cap. 2 point bayonet fitting cap supplied complete with two keys. preferred filler neck size inside minimum 37mm, locating tangs max 46mm dimensio |
| £14.30 for 1 each View part »» |
|
