help on andre hartford shock absorber
|
| This category contains 9 part(s). |
|
| 502M - Andre Hartford shock absorber model 502M |
 |
suitable for the medium size vehicle of approx 1500kg or competition vehicle. enamel finish, ready to fit. two blades into three blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) leng |
| £135.00 for 1 each View part »» |
|
| 502S - Andre Hartford shock absorber model 502S |
 |
suitable for smaller vehicles, up to approx 1000kg weight. enamel finish, ready to fit. one blade into two blades at friction end 3.1/2" (89mm) diameter, minimum arm (blade) length 4.1/2", maximum 9". |
| £98.00 for 1 each View part »» |
|
| 506M - Andre Hartford shock absorber model 506M |
 |
suitable for the large vehicle up to 2000kg weight. enamel finish, ready to fit. two blades into three blades at friction end 4.1/2" (104mm) diameter, minimum arm (blade) length 4.1/2", maximum 10". p |
| £140.00 for 1 each View part »» |
|
| 506S - Andre Hartford shock absorber model 506S |
 |
suitable for the medium size vehicle of approx 1500kg weight. enamel finish, ready to fit. one blade into two blades at friction end 4.1/2" (104mm) diameter, minimum arm (blade) lengths 4.1/2", maximu |
| £105.00 for 1 each View part »» |
|
| 967 - chassis mounting bolt |
 |
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 15/16" (24mm) long. |
| £10.50 for 1 each View part »» |
|
| 645 - chassis mounting bolt |
 |
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 1/8" (3mm) long. |
| £10.50 for 1 each View part »» |
|
| 646 - chassis mounting bolt |
 |
mounting bolt for Andre Hartford shock absorber, 1/2" BSF threads both ends, 9/16" shaft for bush, hexagon 11/16" (17mm) long. |
| £10.50 for 1 each View part »» |
|
| 4763 - Morris mounting stud |
 |
mounting stud for Armstrong friction shock absorbers - where rubber fits over the peg. for later Morris Cowley car and van and Morris Minor etc. choice of flange thickness, please select 3.5mm, 10mm |
| £6.50 for 1 each View part »» |
|
| 647 - shock absorber castle nut |
 |
special tapered castle nut for Andre Hartford mounting on to
chassis bolt. chamfered base, deep slots for cross pinning, thread 1/2" BSF |
| £1.80 for 1 each View part »» |
|
