| This category contains 19 part(s). |
|
| 138 - bonnet catch |
 |
pull bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. chrome on brass, approx 4.75" / 120mm long. complete with bonnet catch plate. |
| £19.20 for 1 each View part »» |
|
| 148 - bonnet catch |
 |
small top quality catch, approx 4.25" / 110mm long, complete with catch plate, chromium plated on brass, small rubber buffer on back. |
| £19.20 for 1 each View part »» |
|
| 149 - bonnet catch |
 |
large top quality catch approx 135mm overall complete with catch plate, chromium plated on brass. mountings approx 90mm apart |
| £23.75 for 1 each View part »» |
|
| 403 - bonnet catch |
 |
'Ripaults' screw down bonnet catch, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 52mm round base, chromium top, approx 85mm tall. choice of patterns, specify your |
| £37.20 for 1 each View part »» |
|
| 426 - bonnet catch |
 |
small spring loaded pull catch with loop finger pull ring, painted finish, complete with pocket, approx 118mm long. chrome finger pull ring. hook for pocket approx 80mm from base. |
| £11.40 for 1 each View part »» |
|
| 468 - bonnet catch |
 |
open spring bonnet catch, nickel plate finish, 125mm long, a cheap spring catch to hold a bonnet down, supplied with top catch. |
| £5.70 for 1 each View part »» |
|
| A-16750-2 - bonnet catch - two hole mount bracket |
 |
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep). |
| £12.80 for 1 each View part »» |
|
| A-16750-3 - bonnet catch - three hole mount bracket |
|
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep). |
| £12.80 for 1 each View part »» |
|
| Y-16750 - bonnet catch plate |
 |
bonnet catch plate for mounting to bonnet panel. base approx 72mm tall x 27mm wide.
useful top catch fitting to be used as an alternative to several of out bonnet catches which have a clip top |
| £9.95 for 1 each View part »» |
|
| CA236A - bonnet catch T top pattern |
 |
stainless steel bonnet catch with T bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally. supplied with zinc plated pocket.
|
| £15.10 for 1 each View part »» |
|
| 116 - bonnet catch with bonnet plate and stud |
 |
chrome plate bonnet catch as fitted to Morris Minor, MG, Wolseley Hornet etc. the catch has a kidney shape plate to allow movement. catch size 133mm overall. |
| £49.70 for 1 each View part »» |
|
| 950 - bonnet fastener catch |
 |
medium size basic type commercial type bonnet catch. 100mm overall high, supplied with bonnet catch pocket. supplied in primer paint finish only. base to pocket clip approx 90mm. |
| £11.50 for 1 each View part »» |
|
| 404 - bonnet fastener, twist to release |
 |
chrome finish long tail lever pattern bonnet catch. sold in opposite pair sets only. push top down against spring to engage hook, turn through 90 degree to release. lever top 80mm long, angled two stu |
| £68.00 for 1 pair View part »» |
|
| 407 - bonnet fastener, twist to release |
 |
chrome finish on brass, tee shape twist handle fastener. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base approx 45mm diameter with four |
| £38.00 for 1 each View part »» |
|
| 407R - bonnet fastener, twist to release Riley |
 |
chrome finish on brass, tee shape twist handle fastener with 'R' embossed into top. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base app |
| £38.00 for 1 each View part »» |
|
| 123 - hook shape bonnet fastener |
 |
chrome plate hook shape bonnet fastener with pocket. a traditional shape utility type catch. pocket and base mounting plate is zinc type plate finish. overall size approx 115mm (hook width 60mm). part |
| £13.60 for 1 each View part »» |
|
| CA425 - pull bonnet catch |
 |
bonnet catch pull and locating bracket of 'squashed tube' pattern offered by Ewarts. 113mm long. finger pull is shaped off the end of the tube. base 36mm x 24mm. bonnet clip base 31mm x 22mm. we offer |
| £19.60 for 1 each View part »» |
|
| 839 - rubber bonnet fastener |
 |
rubber hook with zinc plated bracket and clip. overall length approx 122mm. maximum extension from relaxed to tension not to exceed 10%. |
| £3.25 for 1 each View part »» |
|
| 839A - rubber bonnet fastener - small |
 |
small rubber hook with zinc plated bracket and clip. overall length approx 54mm. maximum extension from relaxed to tension not to exceed 10%. |
| £2.65 for 1 each View part »» |
|
