aluminium body with black push button, two terminals for wood dash. this button is very similar to the vintage Bosch model but has a clip-on cover in place of the early threaded variety. 1 3/8''...
Parts
surface mount Lucas type SPB140 switch (model HD77). base 50mm diameter, two bolt mounting through back (35mm hole centres). side dip switch (lever 18mm long), front horn push (button diameter...
ignition switch - panel mount with two keys. requires 19mm dia, hole. - 4 key positions - accessory/off/ignition/start.
overall housing diameter approx 35mm.
overall housing diameter approx 35mm.
ignition switch - panel mount with two keys. requires 19mm dia, hole. - 2 key position, off/on positions only.
PLC5 type combined key on/off and off/side/head lamp switch. approx 56mm diameter (requires 53mm hole in metal dash panel). the off/side/head positions are printed on the black face panel. screw...
PLC6 type combined key on/off and off/side/head lamp switch. approx 56mm diameter (requires 53mm hole in metal dash panel). the off/side/head positions are displayed on a white background through...
switch as Lucas PPG1 style light switch with pull/twist/pull action. fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
pull on / push off switch (as Lucas SPB104). long shank (18mm long, 9mm diameter,) suitable for wooden dash. black plastic knob on hexagonal stem. knob removed by depressing spring loaded pin, two...
push button (spring loaded) black knob, 22mm diameter chromium bezel, long type for wooden dash, maximum dash thickness 20mm. (requires 19mm hole). makes contact when pushed. as Lucas 31363...
push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash, maximum dash thickness 7mm. (requires 19mm hole). makes contact when pushed, as Lucas 31967 type...
push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash, maximum dash thickness 7mm. (requires 19mm hole). makes contact when pushed, as Lucas 31967 type...
push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash, maximum dash thickness 7mm. (requires 19mm hole). makes contact when pushed, as Lucas 31967 type...
push button, flange for mounting on to dash, button head approx 38mm dia. mounting flange 53mm x 35mm with two screw hole (hole centres 42mm). Lucas type SPB160 replacement item
pull/push switch, long shank suitable for wooden dash, maximum dash thickness 10mm, fits 8mm hole, overall dimensions 58mm long x 30mm at widest point, two brass terminals with screws, black knob
useful rotary 4 position (off, side, dip, main) switch with black lever to fit a metal dash (26mm hole) with fixing nut to retain. 6 screw terminals to rear.
surface mounted dip switch, 2 5/8'' (67mm) diameter, three hole fixing. well finished in black plastic. new old stock Lucas part 31001.
toggle switch, on/off only, requires hole through metal panel 13mm. nickel plate toggle lever
a neat little toggle switch with a LED in the end of the toggle that lights up when power is turned on. panel hole 13mm, specify colour choice please, rated at 15amp.
a neat little toggle switch with a LED in the end of the toggle that lights up when power is turned on. panel hole 13mm, specify colour choice please, rated at 15amp.
a neat little toggle switch with a LED in the end of the toggle that lights up when power is turned on. panel hole 13mm, specify colour choice please, rated at 15amp.
a neat little toggle switch with a LED in the end of the toggle that lights up when power is turned on. panel hole 13mm, specify colour choice please, rated at 15amp.
a neat little toggle switch with a LED in the end of the toggle that lights up when power is turned on. panel hole 13mm, specify colour choice please, rated at 15amp.
rotary on-off turn switch with black knob with two flattened grips. short shank for metal dash, requires 19mm panel hole, bezel 22mm diameter. black knob with chrome bezel . as Lucas 31356 type...
original Lucas new/old stock ignition switch with screw terminals - panel mount with two keys. requires 19mm dia, hole. - 2 key position, off/on positions only.
remade item of Lucas 56SA type pull switch with red illuminated knob, fitted with 12 volt bulb.
fits through 3/8" (10mm) panel hole on metal dash.
two push in terminals to rear, body 23mm deep...
fits through 3/8" (10mm) panel hole on metal dash.
two push in terminals to rear, body 23mm deep...
plc switch wire retaining clip, fits all Lucas PLC2, PLC5 and PLC6 (our 836 and 836A) switches, overall dimensions 45mm x 55mm, 1.5mm thick wire.
flat blade steel ignition key for the PLC2 switch used on Austin 7 and Morris 8 etc,
Prices shown include VAT @ 20% where applicable