Wire clip for old style brass spade HT terminal on to spark plug.
Parts
Straight NGK spark plug HT cap, black phenolic moulding with carbon suppressor, overall length 93mm with rubber grommets making them waterproof. 78mm without grommets (as shown in larger image)....
Insulator cover for distributor cap terminal part number 006-13
Insulator cover for distributor cap or coil terminal - use with part numbers 006-03 or 921 depending on whether push in or acorn connection
chassis clip, simply push on to the edge of the chassis to hold cables/pipes, 40mm long 12mm wide, per packet of 10 pieces.
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
brass P clip for general purpose uses. available in the following diameter sizes and pack quantities.
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
it is possible to close the retaining loop slightly with a blade tap in the base of the P...
Solderless battery terminal, round post, state whether positive or negative required.
negative
negative
Solderless battery terminal, round post, state whether positive or negative required.
Positive
Positive
Solderless battery terminal, round post, state whether positive or negative required.
solder type end fixing terminal for usual 160amp battery lead/cable, fixing hole 8mm, cable inlet 8mm.
Brass solder type HT plug end terminal, wire passes through centre and is held in place with a spot of solder. For standard 7mm HT lead with copper wire centre.
Single (joins 2 wires) snap connector. Supplied with solder type nipples. Per packet 10 pieces complete.
Double (joins 4 wires) snap connector supplied with solder type nipples. Per packet of 10 pieces complete.
Solder type nipples for snap connector, (note already supplied with parts 558 and 559 part numbers in 'Terminal and Connector Blocks'). 4.75mm diameter. Per packet of 10 pieces.
Push in cable electrical terminal as used by Lucas in rolled end terminals on lamps and switches etc. Bared cable is pushed through the hollow middle and then pulled back over the outside before...
Starter-solenoid rubber button cover, equivalent to Lucas part 760130. Dimensions 27mm diameter x 17mm tall with a 17mm opening.
starter-solenoid terminal insulator rubber, equivalent to Lucas part 764272
Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. a stripped wire is laid into the pronged cup with the flat washer put on top,...
Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. a stripped wire is laid into the pronged cup with the flat washer put on top,...
Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. a stripped wire is laid into the pronged cup with the flat washer put on top,...
Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. a stripped wire is laid into the pronged cup with the flat washer put on top,...
Knurled brass spark plug terminal nut - for most modern plugs. 4BA thread
Spilt brass washer for distributor HT lead (each). 9.5mm diameter with 2mm hole.
Two panel mount sockets (red and black) and and one plug - which has two equal size pins (pins 13mm centres, plug pins 3.18mm diameter). Often used for inspection lamps etc. Equivalent to Lucas...
Two pin plug with different diameter pins (pins 13mm centres, plug pins 3.18mm diameter for black socket, 3.81mm diameter red socket). Often used for inspection lamps etc. Equivalent to Lucas plug...
Two sockets with different diameter pins, often used for inspection lamps etc. Equivalent to Lucas sockets 38605A, as supplied by Lucas for fitting Lucas plug 304919. Will fit our part 960P.
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
Metal clip (plated) for securing pipe or cable etc. Available in the following diameter sizes: 5mm, 6mm, 8mm, 10mm and 12mm - per packet of 10 pieces
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
fits D33 - C575 dynamo
fits D33 - C575 dynamo
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
8/10hp 1937 onwards
8/10hp 1937 onwards
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
8/10hp 1932-34
8/10hp 1932-34
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
100E & 105E
100E & 105E
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
8/10hp 1932-37
8/10hp 1932-37
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
as Lucas 54212257
as Lucas 54212257
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
8/10hp 1935-40
8/10hp 1935-40
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
Lucas ref 238061 . fits C45 C40 dynamo
Lucas ref 238061 . fits C45 C40 dynamo
two, three and four brush dynamo and starter brush sets.
as Lucas 255659 set
as Lucas 255659 set
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
two, three and four brush dynamo and starter brush sets.
8/10hp 1940 onwards
8/10hp 1940 onwards
two, three and four brush dynamo and starter brush sets.
100E
100E
HTC straight spark plug terminal, as original early Champion version. These are a non-suppressed terminal with fixed screw tip that screws into the centre core of the HT wire ends.
WCX600 spark plug suppressed terminals, embossed 'CHAMPION' or 'LUCAS', 90 degree angle (side entry) cable which screws on to ignition wire, black.
WCX600 spark plug suppressed terminals, embossed 'CHAMPION' or 'LUCAS', 90 degree angle (side entry) cable which screws on to ignition wire, black.
WCX600 spark plug suppressed terminals, embossed 'CHAMPION' or 'LUCAS', 90 degree angle (side entry) cable which screws on to ignition wire, black.
Prices shown include VAT @ 20% where applicable
