Parts and Spares

Subcategories

Parts

Price from: £5.92 each (£7.10 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £2.59 Each (£3.11 inc. VAT)
Main rim gasket for our 211R series lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
Price from: £2.89 Each (£3.47 inc. VAT)
Main rim gasket for our 211R series lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
Price from: £38.95 each (£46.74 inc. VAT)
6V Positive Earth. 12 Amber LED, 7 Red LED tail light. For lamp part number 211RA. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully...
Price from: £36.95 each (£44.34 inc. VAT)
12V Negative Earth. 12 Amber LED, 7 Red LED tail light. For lamp part number 211RA. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully...
Price from: £40.75 each (£48.90 inc. VAT)
12V Negative Earth. 12 Amber LED, 7 Red LED tail light with 4 white LED number plate light. For lamp part number 211RA-S. Two single contact equal pin BA15 bulb base connectors. High quality...
Price from: £6.85 Each (£8.22 inc. VAT)
Polished stainless steel lamp rim. Highly polished die stamped stainless steel.
Price from: £6.95 Each (£8.34 inc. VAT)
Quality clear glass lens for number plate illumination cut out on CA1265, CA1266 and 211R lamps
Price from: £2.48 Each (£2.98 inc. VAT)
Main rim gasket for our CA1266 series lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
Price from: £11.90 Each (£14.28 inc. VAT)
High quality plain red glass lens.
Price from: £2.85 Each (£3.42 inc. VAT)
Number plate lens gasket for our CA1265 series lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
Price from: £2.80 Each (£3.36 inc. VAT)
Main rim gasket for our CA1265 series lamps. Made of quality cork material. Die cut to the exact shape and size as original to provide a nice tight seal.
Price from: £10.90 Each (£13.08 inc. VAT)
Desmo bronze badge/medallion, 19mm in diameter with a 2mm hole in the centre, marked Desmo across the top, with winged car motif in the centre and Birmingham across the bottom, available in chrome...
Price from: £10.90 Each (£13.08 inc. VAT)
Desmo bronze badge/medallion, 19mm in diameter with a 2mm hole in the centre, marked Desmo across the top, with winged car motif in the centre and Birmingham across the bottom, available in chrome...
Price from: £10.90 Each (£13.08 inc. VAT)
Desmo bronze badge/medallion, 19mm in diameter with a 2mm hole in the centre, marked Desmo across the top, with winged car motif in the centre and Birmingham across the bottom, available in chrome...
Price from: £6.85 Each (£8.22 inc. VAT)
Polished stainless steel lamp rim. Highly polished die stamped stainless steel.
Price from: £3.44 each (£4.13 inc. VAT)
Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.
Price from: £3.44 each (£4.13 inc. VAT)
Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Offset pin
Price from: £3.44 each (£4.13 inc. VAT)
Metal cased replacement bulbholder. outside 16.4mm x approx 23.5mm long.
Offered with single (equal pin) or double (offset pin) contacts.

Price from: £26.33 Each (£31.60 inc. VAT)
7" sealed beam headlamp unit 12v 65/55watt, LHD, with side light window, three spade terminal connection.
Price from: £9.60 Each (£11.52 inc. VAT)
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw, dimensions 38mm x 15mm, screw tongue 15mm wide x 9mm tall.
Price from: £9.60 Each (£11.52 inc. VAT)
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw in threaded hole, dimensions 24mm x 13mm, threaded screw...
Price from: £9.33 Each (£11.20 inc. VAT)
Lucas type silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw in plain 5mm hole, dimensions 28mm x 13mm, threaded screw...
Price from: £9.33 Each (£11.20 inc. VAT)
Silver painted brass bracket. fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw, dimensions 36mm x 18mm, screw tongue 17mm wide x 15mm tall with 5mm slot.
Price from: £9.83 each (£11.80 inc. VAT)
Single contact BA15s bulbholder with wire tail. Measures outside 17mm x 26mm long. Note the two barb tags to the side to hold this in place.
Price from: £10.85 each (£13.02 inc. VAT)
Replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
single contact parallel pin, double contact parallel pin, double contact offset pin....
Price from: £10.85 each (£13.02 inc. VAT)
Replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
single contact parallel pin, double contact parallel pin, double contact offset pin....
Price from: £10.85 each (£13.02 inc. VAT)
Replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
single contact parallel pin, double contact parallel pin, double contact offset pin....
Price from: £10.85 each (£13.02 inc. VAT)
Replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
single contact parallel pin, double contact parallel pin, double contact offset pin....
Price from: £26.50 each (£31.80 inc. VAT)
Replacement acrylic D lamp red lens (Lucas 523307) for the Lucas box type 288-3 rear number plate lamp on the rear number plate box assembly. For chrome rim, clip, gasket and screw please see our...
Price from: £29.48 Each (£35.38 inc. VAT)
Replacement acrylic D lamp red and white lens (Lucas 523308) for the Lucas box type 288-3 rear number plate lamp on the rear number plate box assembly. Chrome rim, clip, gasket and screw is our...
Price from: £31.01 Each (£37.21 inc. VAT)
7" sealed beam headlamp unit 12v 65/55watt, RHD, with side light window, three spade terminal connection.
Price from: £11.36 each (£13.63 inc. VAT)
Bulbholder sleeve (offset BAY15) and cotton braid pig tail wires which will fit into part number 211 lamps to enable a small globe double contact bulb to be fitted.

You need to order bulb...
Price from: £17.12 each (£20.54 inc. VAT)
Replacement glass lens for 211 Duolamp, specify all red or split amber/red

Price from: £16.46 each (£19.75 inc. VAT)
Replacement glass lens for 211 Duolamp, specify all red or split amber/red

Price from: £16.46 each (£19.75 inc. VAT)
Replacement glass lens for 211 Duolamp, specify all red or split amber/red
Price from: £8.31 each (£9.97 inc. VAT)
Semaphore (orange) plastic blade to fit Lucas SF80 trafficator, (equivalent part 532026). overall length 180mm.
Price from: £8.27 each (£9.92 inc. VAT)
Polished stainless steel backing for SF80 trafficator. overall length 195mm.
Price from: £9.60 each (£11.52 inc. VAT)
Domed red or amber main lens for our 257 lamp. base 60mm diameter measured overall.

domed amber lens
Price from: £9.60 each (£11.52 inc. VAT)
Domed red or amber main lens for our 257 lamp. base 60mm diameter measured overall.

domed red lens
Price from: £9.60 each (£11.52 inc. VAT)
Domed red or amber main lens for our 257 lamp. base 60mm diameter measured overall.
Price from: £3.16 each (£3.79 inc. VAT)
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber divers lamp, clear, red or amber

amber spare lens
Price from: £3.16 each (£3.79 inc. VAT)
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber divers lamp, clear, red or amber

clear spare lens
Price from: £3.16 each (£3.79 inc. VAT)
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber divers lamp, clear, red or amber

red spare lens
Price from: £3.16 each (£3.79 inc. VAT)
Replacement plastic side lens (44mm dia x 2mm thick) for the rubber divers lamp, clear, red or amber
Price from: £4.84 each (£5.81 inc. VAT)
Double contact, double ended BA15D bulb holder insert, four spring loaded brass contacts which allows it to be adapted for various applications, overall length 27mm, insulator 11mm long x 15.6mm...
Price from: £13.45 each (£16.14 inc. VAT)
double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact
Price from: £13.45 each (£16.14 inc. VAT)
double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

single contact holder which accepts a plug or standard SBC...
Price from: £13.45 each (£16.14 inc. VAT)
double ended holder which accepts a plug or standard SBC bulb at either end. threaded outside body. offered in single or double contact

double contact holder which accepts a plug or standard SBC...
Price from: £8.41 each (£10.09 inc. VAT)
Plug for SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.
Price from: £8.41 each (£10.09 inc. VAT)
Plug for SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.

Plug for SBC type holder, single contact, cables enter through back.
Price from: £8.41 each (£10.09 inc. VAT)
Plug for SBC type bulb holders. Offered in double contact or single contact.
Cables enter through back.

Plug for SBC type holder, double contact, cables enter through back.
Price from: £8.47 Each (£10.16 inc. VAT)
Double contact bulb holder plug with solder connections, two part (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the knurled cap and...
Price from: £8.47 Each (£10.16 inc. VAT)
Double contact bulb holder plug with solder connections, two part (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the knurled cap and...
Price from: £8.47 Each (£10.16 inc. VAT)
Double contact bulb holder plug with solder connections, two part (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the knurled cap and...
Price from: £9.43 each (£11.32 inc. VAT)
Plated dish reflector to assist with light reflection in rubber divers lamp, overall diameter 55mm with 14mm hole in the centre.
Price from: £3.85 each (£4.62 inc. VAT)
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber divers lamp, specify colour

flat amber lens
Price from: £3.85 each (£4.62 inc. VAT)
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber divers lamp, specify colour

Flat red lens
Price from: £3.85 each (£4.62 inc. VAT)
Flat red or amber front plastic lens (58mm dia x 3mm thick) for rubber divers lamp, specify colour
Price from: £8.93 each (£10.72 inc. VAT)
Replacement red plastic lens with brass inner screw thread for our 288 lamp, equivalent to Lucas L582
Price from: £8.02 Each (£9.62 inc. VAT)
Replacement clear plastic sleeve lens for number plate illumination in our 288 lamp, equivalent to Lucas L582
Price from: £11.86 Each (£14.23 inc. VAT)
Amber glass round prismatic lens for our 288A lamps.
40mm diameter with concave back to allow fitment of a standard BA15 bulb.
Price from: £11.86 Each (£14.23 inc. VAT)
Red glass round prismatic lens for our 288A lamps.
40mm diameter with concave back to allow fitment of a standard BA15 stop/tail bulb.
Price from: £12.89 each (£15.47 inc. VAT)
Pre-focus headlamp connector with lead, double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall length 910mm.
Price from: £8.56 each (£10.27 inc. VAT)
Sealed beam headlamp connector with lead, nylon block three Lucar connector, three wires with headlamp bowl sealing grommet and soldered bullets, overall length 850mm.
Price from: £13.99 each (£16.79 inc. VAT)
Plastic front lens for our 297 (Lucas 1130 type) side lamp.
Price from: £13.99 each (£16.79 inc. VAT)
Plastic front lens for our 297 (Lucas 1130 type) side lamp.

Amber coated lens
Price from: £0.68 each (£0.82 inc. VAT)
Rubber lens O ring for our 297 (Lucas 1130) sidelamp with the plastic lens
Price from: £14.12 each (£16.94 inc. VAT)
BRC lamp oval plate - engraved copper.
marked B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA
measures 59mm x 26mm
Price from: £16.09 each (£19.31 inc. VAT)
Single ended bulb holder. dimensions thread diameter 19mm, overall length 38mm, flange 28.5mm, accepts BA15D bulb, rear nut removes to expose terminal contacts. double contact.
Price from: £4.73 Each (£5.68 inc. VAT)
Double contact bulb holder insert, fits our 422 bulb holder, two spring loaded brass bulb contacts at one end with two wire terminals at the other, insulator body dimensions 16mm long x 16.7mm...
Price from: £16.68 each (£20.02 inc. VAT)
Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC Ba15d parallel pin bulbs. Please note these are made to original pattern.
Price from: £51.18 pair (£61.42 inc. VAT)
Two bulbs (amber for flasher, clear for sidelamp) - 12 volt ONLY - bulb holder for fitting into Lucas type 1130 sidelamps - our 297 part number series. Supplied in pairs only. Mounting plate...
Price from: £8.99 each (£10.79 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £5.92 each (£7.10 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £6.16 each (£7.39 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £6.73 each (£8.08 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £7.40 each (£8.88 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £8.16 each (£9.79 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £8.99 each (£10.79 inc. VAT)
Reproduction 'King of the Road' Lucas type badge. Chrome plate on brass pressings with lugs on rear to peen over and secure as original. We stock the following sizes (measure overall diameter of...
Price from: £5.48 each (£6.58 inc. VAT)
Raydot brass lamp badge medallion, 17mm diameter across the top 15.5mm approx below lip, fits into a 15.5mm hole, marked RAYDOT LTD in the centre with Made in England around the edge, brass only...
Price from: £7.68 each (£9.22 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £7.68 each (£9.22 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £8.99 each (£10.79 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £8.99 each (£10.79 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £10.29 each (£12.35 inc. VAT)
reproduction Rotax badge. chrome plate on brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very small - 15.7mm...
Price from: £10.73 Each (£12.88 inc. VAT)
Smiths lamp badge medallion, 16mm diameter across the top 15mm approx below lip, fits into a 15mm hole, marked Smiths across the top and London at the bottom, MA in a circle in the centre, nickel...
Price from: £4.75 each (£5.70 inc. VAT)
Stainless steel lamp rim retaining screw - 4BA thread x 16mm long, slotted and knurled head 8mm diameter. Used on D lamps etc.
Price from: £11.75 Each (£14.10 inc. VAT)
Replacement rear lamp red lens for our 53330 (type L549) lamp
Price from: £44.87 each (£53.84 inc. VAT)
Replacement side mounting bracket for the pillar mounted Raydyot spotlamp. approx 106mm overall, chrome on brass.
Price from: £10.29 each (£12.35 inc. VAT)
Replacement front glass lens for Raydyot pillar mounted spot lamp 570. measures 104mm diameter.
Price from: £2.34 each (£2.81 inc. VAT)
Glass to rim seal ring
Price from: £27.16 each (£32.59 inc. VAT)
Chrome lamp rim, glass lens and retaining seal for L489 lamp
Price from: £12.48 each (£14.98 inc. VAT)
Bulbholder for L489 sidelamp - BA9 bulbholder fitting single contact.
Price from: £8.20 each (£9.84 inc. VAT)
Replacement chrome plated lamp retaining rim for Lucas L471 type rear lamps
Price from: £3.28 each (£3.94 inc. VAT)
Rubber lamp entry cable grommet. approx 13.5mm internal diameter.
Price from: £9.78 each (£11.74 inc. VAT)
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 56mm long x 16mm thread diameter.
Price from: £9.93 each (£11.92 inc. VAT)
Headlamp mounting bolt (hollow) with loose collar. thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter.
Price from: £10.87 each (£13.04 inc. VAT)
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread). Measures approx 68mm long x 16mm thread diameter.
Price from: £9.83 each (£11.80 inc. VAT)
Headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter.
Price from: £19.90 each (£23.88 inc. VAT)
P80, RB160 headlamp mounting bolt. thread 1/2" x 26 tpi ( fine thread) as original. measures approx 85mm long x 13mm thread diameter (thread runs for 24mm).
Price from: £22.29 Each (£26.75 inc. VAT)
P100 headlamp mounting bolt and nut. Thread 1/2" x 26 tpi ( fine thread) as original. Measures approx 105mm long x 13mm thread diameter (thread runs for 28mm), head diameter 22mm with a 12.5mm...
Price from: £8.14 each (£9.77 inc. VAT)
Lamp mounting bolt (hollow). thread 7/16" x 26 tpi ( fine thread) as original. measures approx 36mm long x 11mm thread diameter. supplied with hexagon nut. used on various Lucas spot and sidelamps.
Price from: £5.73 each (£6.88 inc. VAT)
Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF
Price from: £3.56 each (£4.27 inc. VAT)
Hexagonal nut for Lucas type lamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore.
Price from: £6.04 each (£7.25 inc. VAT)
Brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc type lamp. thread 1/2" x 26 tpi
as Lucas part 500357
Price from: £9.57 Each (£11.48 inc. VAT)
Daisy head headlamp rim screw for the Lucas L140 & L150 headlamps, overall length 36mm (head 18mm, thread 18mm) head diameter 15mm tapering down to 9mm, with a 2BA thread.
Price from: £1.48 each (£1.78 inc. VAT)
W wire clip to hold glass into headlamp rim, approx 36mm long
Price from: £1.79 each (£2.15 inc. VAT)
Large W wire spring clip for holding glass into rim. approx 48mm long side with a slight curve. useful for deep headlamp rims.
Price from: £2.14 each (£2.57 inc. VAT)
Large W wire for holding glass into rim, approx 54mm long side. this clip is actually made for P100 lamps.
Price from: £4.07 pkt of 6 (£4.88 inc. VAT)
Small w wire clip for sidelamps, approx 22mm long, packet of 6 pieces
Price from: £18.67 each (£22.40 inc. VAT)
Original pattern frosted lens with chrome rim for our 297 (Lucas 1130 type light) side lamp, overall outside diameter 47mm.
Price from: £3.11 each (£3.73 inc. VAT)
Red dot medallion for Lucas type 1130, LD109 etc side lamps. Overall dimensions 14mm diameter x 6.25mm deep, to fit 11.5mm hole.
Price from: £10.91 Each (£13.09 inc. VAT)
replacement red glass for plain D lamp, overall dimensions 67 tall x 78mm wide.
Prices shown include VAT @ 20% where applicable