In Line

Help and Instructions

  • Modern fuels with old style taps

    Modern fuels play havoc with old style taps - which can be divided into two types:
    Taper plug fitting into a taper hole which uses a grease and the cork lined types. sadly all these suffer with the effect of the fuel which is now available.

    The cork lined taps can be dismantled and the cork massaged with silicone grease before reassembly.

    The taper plug taps must never be reseated with any cutting paste (if so they are wrecked) but can be dismantled, apply a thin smear of Red Hermetite or Hylomar Blue sealant, put the plug back into the housing in the ‘open’ position and reassemble. leave for a day to let the sealant dry - this then gives the tap taper a sealing seat.

    The grease most commonly used is Molykote 3451.

    It is possible that these remedies may need to done again at later intervals (depending on use). always ensure that you work safely, draining fuel out of tank before removing tap, taking necessary safety procedures whilst handling the parts and correct and careful re-assembly and refitting.

Parts

Price from: £130.45 each (£156.54 inc. VAT)
Enots three way tap with cork plate and 3/8" BSP threads, for 3/8" copper tube fittings (to be ordered separately). the hexagonal bar that the lever is attached to can be modified if required so...
Price from: £13.30 each (£15.96 inc. VAT)
straight 1/8" BSP in-line tap for oil supply. 60 degree conical seat in both ends.
use with 1/8"BSP solder nut and nipple to be bought separately.
Price from: £49.70 each (£59.64 inc. VAT)
two way tap, 1/4" BSP thread for solder type nipple connection. lever on position when handle is in line with outlet.
order solder type nut and nipples as required separately.
Price from: £13.95 each (£16.74 inc. VAT)
1/4" BSP thread 2 way tap for solder nut and nipples. all three ends have 60 degree seat. tap supplied bare of any fittings - which are to be ordered separately.
(dimensions with nuts & nipples...
Price from: £41.00 each (£49.20 inc. VAT)
pull fuel control tap with cork seal. 7/16" x 19 TPI thread into tank, THIS IS A CONTROL TAP NOT AN ON/OFF TAP, would work as two different feeds to one line. 3 x 1/4"BSP thread for nut and nipple...
Price from: £96.40 each (£115.68 inc. VAT)
three way tap with 3/8" BSP threads. brass body with cork sunder lever. supplied without with nuts and nipples (order separately), overall dimensions with nuts & nipples fitted 105mm tall x 45mm...
Price from: £109.50 each (£131.40 inc. VAT)
ENOTS main/reserve tap fits into the bottom of some autovacs 3/8” BSP pipe, 1/2" BSP thread into tank.
Price from: £20.30 each (£24.36 inc. VAT)
straight in line tap with 1/4“ BSP thread, both have 60 degree seat at for solder type fittings. body length (inc threads) 45mm, diameter 19mm.
tap supplied bare - order fittings as required...
Price from: £18.80 each (£22.56 inc. VAT)
straight in line tap 1/8" BSP thread into tank, 1/4" BSP thread with 60 degree seat for solder type fittings. overall dimensions 45mm long inc threads x 19mm diameter. Tap supplied bare - order...
Price from: £21.55 each (£25.86 inc. VAT)
hexagonal push on/off in line tap threads 1/8 and 1/4“ BSP threads. !/8" BSP thread into tank, 1/4" BSP thread with 60 degree seat for solder type fittings.
overall dimensions 50mm long (inc...
Price from: £21.55 each (£25.86 inc. VAT)
hexagonal push on/off in line tap threads 1/4“ BSP threads. !/4" BSP thread into tank, 1/4" BSP thread with 60 degree seat for solder type fitting.
overall dimensions 50mm long (inc threads) 16mm...
Price from: £22.70 each (£27.24 inc. VAT)
straight in line tap with 3/8“ BSP thread, both have 60 degree seat at for solder type fittings. body length (inc threads) 48mm, diameter 19mm.
tap supplied bare - order fittings as required...
Price from: £22.00 each (£26.40 inc. VAT)
pull on in line fuel tap with cork seal pull/push knob and filter gauze. 1/8'' BSP thread into tank, 7/16" x 19TPI thread for solder nut and nipple on outlet.
tap offered as shown, if nut and...
Price from: £4.35 each (£5.22 inc. VAT)
replacement cork and brass pull knob for tap. cork approx 10mm diameter. under round pull head to end of cork 23mm.

Price from: £130.45 each (£156.54 inc. VAT)
Enots three way tap with cork plate and 1/4" BSP threads, (for 1/4'' or 5/16" copper tube fittings to be ordered separately). the hexagonal bar that the lever is attached to can be modified if...
Price from: £26.55 each (£31.86 inc. VAT)
1/4" BSP in line tap, fitted with compression fittings for 5/16" pipe.
Price from: £26.55 each (£31.86 inc. VAT)
1/4" BSP in line tap, fitted with compression fittings for 5/16" pipe.

with 1/4" compression fittings
Price from: £26.55 each (£31.86 inc. VAT)
1/4" BSP in line tap, fitted with compression fittings for 5/16" pipe.

5/16"compression fittings
Price from: £96.40 Each (£115.68 inc. VAT)
three way tap with 1/4" BSP threads. brass body with cork under lever. supplied without nuts and nipples (order separately), overall dimensions with nuts & nipples fitted 100mm tall x 45mm wide,...
Price from: £22.00 each (£26.40 inc. VAT)
angled pull on in line fuel tap with cork seal pull/push knob and filter gauze. offered with either 1/4"BSP or 1/8'' BSP thread into tank, 7/16" TPI thread for solder nut and nipple on outlet....
Price from: £22.00 each (£26.40 inc. VAT)
angled pull on in line fuel tap with cork seal pull/push knob and filter gauze. offered with either 1/4"BSP or 1/8'' BSP thread into tank, 7/16" TPI thread for solder nut and nipple on outlet....
Price from: £22.00 each (£26.40 inc. VAT)
angled pull on in line fuel tap with cork seal pull/push knob and filter gauze. offered with either 1/4"BSP or 1/8'' BSP thread into tank, 7/16" TPI thread for solder nut and nipple on outlet....
Prices shown include VAT @ 20% where applicable