Taps

Subcategories

Parts

Price from: £0.55 each (£0.66 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. to fit moulding with approx 14mm gap supplied with fixing rivet for 3mm. sold each.
Price from: £1.00 each (£1.20 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. supplied with fixing rivet for 3mm hole. will suit ford 100E with the 16mm side strips, 1956 - 61. sold each.
Price from: £3.25 packet of 10 piecess (£3.90 inc. VAT)
Moulding Clip, for fixing body moulding strips to vehicle side. to fit moulding with approx 11mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. will suit ford...
Price from: £0.55 each (£0.66 inc. VAT)
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. to fit moulding with approx 9mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. sold each.
Price from: £21.55 each (£25.86 inc. VAT)
pull bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. chrome on brass, approx 4.75" / 120mm long. complete with bonnet catch plate. Hole centres...
Price from: £20.65 each (£24.78 inc. VAT)
small top quality catch, approx 4.25" / 110mm long overall, complete with catch plate, chromium plated on brass, small rubber buffer on back. base plate and catch plate same size (40mm x 19mm with...
Price from: £14.50 each (£17.40 inc. VAT)
small spring loaded pull catch with loop finger pull ring, painted finish, complete with pocket, approx 118mm long. chrome finger pull ring. hook for pocket approx 80mm from base.
Price from: £7.85 each (£9.42 inc. VAT)
open spring bonnet catch, nickel plate finish, 125mm long, a cheap spring catch to hold a bonnet down, supplied with top catch.
Price from: £19.70 each (£23.64 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
Price from: £19.70 each (£23.64 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Price from: £22.50 each (£27.00 inc. VAT)
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Price from: £13.95 each (£16.74 inc. VAT)
bonnet catch plate for mounting to bonnet panel. base approx 72mm tall x 27mm wide.
Price from: £20.95 each (£25.14 inc. VAT)
stainless steel bonnet catch with T bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.

Price from: £64.75 each (£77.70 inc. VAT)
chrome plate bonnet catch as fitted to Morris Minor, MG, Wolseley Hornet etc. the catch has a kidney shape plate to allow movement. catch size 133mm overall.
Price from: £50.25 each (£60.30 inc. VAT)
chrome finish on brass, tee shape twist handle fastener. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base approx 45mm diameter with...
Price from: £50.25 each (£60.30 inc. VAT)
chrome finish on brass, tee shape twist handle fastener with 'R' embossed into top. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base...
Price from: £3.55 each (£4.26 inc. VAT)
rubber hook with zinc plated bracket and clip. overall length approx 122mm. maximum extension from relaxed to tension not to exceed 10%.
Price from: £2.90 each (£3.48 inc. VAT)
small rubber hook with zinc plated bracket and clip. overall length approx 54mm. maximum extension from relaxed to tension not to exceed 10%.
Price from: £43.30 each (£51.96 inc. VAT)
screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...
Price from: £43.30 each (£51.96 inc. VAT)
screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...
Price from: £43.30 each (£51.96 inc. VAT)
screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...
Price from: £45.45 each (£54.54 inc. VAT)
screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...
Price from: £47.65 each (£57.18 inc. VAT)
screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm...
Price from: £41.80 each (£50.16 inc. VAT)
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.
Price from: £80.85 each (£97.02 inc. VAT)
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.

please note that this...
Price from: £55.60 each (£66.72 inc. VAT)
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.

Price from: £41.80 each (£50.16 inc. VAT)
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.

Price from: £34.55 Each (£41.46 inc. VAT)
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.
Price from: £66.20 each (£79.44 inc. VAT)
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.

please note...
Price from: £46.05 each (£55.26 inc. VAT)
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.

Price from: £34.55 Each (£41.46 inc. VAT)
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.

Price from: £54.60 each (£65.52 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Price from: £54.60 each (£65.52 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Price from: £63.35 each (£76.02 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Price from: £164.90 each (£197.88 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Price from: £43.50 each (£52.20 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Price from: £43.50 each (£52.20 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Price from: £44.25 Each (£53.10 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Price from: £125.00 Each (£150.00 inc. VAT)
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Price from: £73.20 each (£87.84 inc. VAT)
heavyweight stainless folded type top bonnet hinge, 3/8" (10mm) brass pin, 16swg stainless steel flap folded towards pin, approx 45mm when open, 50mm knuckles, 54" (1.37m) long
Price from: £12.20 each (£14.64 inc. VAT)
chrome on brass fitting. base 48mm x 19mm, mounting holes 32mm centres.
Price from: £13.50 each (£16.20 inc. VAT)
chrome on brass fitting. base approx 45mm x 16mm, 28mm deep overall. mounting holes 31mm centres.
Price from: £11.45 each (£13.74 inc. VAT)
chrome on brass fitting. base 45mm x 16mm, mounting holes 32mm centres.
Price from: £11.45 each (£13.74 inc. VAT)
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Price from: £12.15 each (£14.58 inc. VAT)
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Price from: £48.35 each (£58.02 inc. VAT)
chrome on brass folded centre bonnet strip. 1270mm length (50") 21mm wide. side panels are folded and slide in place.
this part will need to be cut shorter by user for some applications.
Price from: £39.35 each (£47.22 inc. VAT)
chrome on brass folded centre bonnet strip, 845mm length (33.25") 21mm wide. side panels are folded and slide in place.
this part is offered in the longer length for the listed vehicles. the...
Price from: £16.00 each (£19.20 inc. VAT)
chrome plate end cover and clamp for centre strip. base 51mm x 13mm, holes 35mm apart.
Price from: £30.15 each (£36.18 inc. VAT)
folded steel side strip for sliding into bonnet strip, 48"/1.22 metre long. weld to flat panel. 25mm overall width (flange 14mm)
Price from: £1.95 pkt of 10 (£2.34 inc. VAT)
copper bifurcated rivet, 7.5mm head, stem 3.8mm x 11mm. for fixing bonnet tape etc. per packet 10
Price from: £5.80 metre (£6.96 inc. VAT)
19mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £5.30 metre (£6.36 inc. VAT)
19mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £5.40 metre (£6.48 inc. VAT)
16mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £8.70 metre (£10.44 inc. VAT)
25mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £4.75 metre (£5.70 inc. VAT)
13mm wide x approx 4.5mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £5.00 metre (£6.00 inc. VAT)
13mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £5.95 metre (£7.14 inc. VAT)
25mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £4.60 metre (£5.52 inc. VAT)
10mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £5.25 metre (£6.30 inc. VAT)
16mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £6.10 metre (£7.32 inc. VAT)
32mm wide x approx 3mm thick. this product is impregnated to produce a dark brown stiff beading (as original product) which will acts as the rubbing tape between bonnet (hood) and radiator cowl...
Price from: £40.55 metre (£48.66 inc. VAT)
H section brass windscreen extrusion, approx 13mm wide, 19mm high, groove approx 8.5mm. cut in 10cm units. price shown per metre.

Click on "bigger Image" for complete dimensions

please order...
Price from: £36.70 metre (£44.04 inc. VAT)
U section brass windscreen extrusion, approx 12.5mm wide, 19mm high, groove approx 9mm. cut in 100cm units. price shown per metre.

Click on "bigger Image" for complete dimensions

please...
Price from: £38.20 metre (£45.84 inc. VAT)
H section brass windscreen extrusion, approx 14mm wide, 25mm high, groove approx 9.5mm. cut at 10cm units. price shown per metre

please order individual lengths required in measure multiples...
Price from: £39.15 metre (£46.98 inc. VAT)
h section brass windscreen extrusion, approx 15mm wide, 33mm high, (upstand measures 16mm from flat) ,groove approx 9.5mm. cut in 10cm units. price shown per metre.

Click on "bigger Image" for...
Price from: £25.00 metre (£30.00 inc. VAT)
U section brass windscreen extrusion, approx 13mm wide, 18mm high, groove approx 10mm straight sides with small radius to bottom corners. cut at 25cm units. price shown per metre. offer in the...
Price from: £47.95 metre (£57.54 inc. VAT)
U section brass windscreen extrusion, approx 13mm wide, 19mm high, groove approx 7.7mm straight sides with small radius to bottom corners. cut in 100mm units. this section has a 2.45mm thickness...
Price from: £182.00 each (£218.40 inc. VAT)
second quality chrome hood window frame to fit into the back of convertible hoods. a period fitting rather than using flexible vyback. we manufacture in one standard size of approx 460mm x 150mm,...
Price from: £16.70 each (£20.04 inc. VAT)
angled mounting catch ideal for tool box etc. chrome on brass. can be locked with small padlock (not supplied). base 63mm x 30mm, overall 83mm.
base has 4 mounting holes and top bracket has 2...
Price from: £5.85 each (£7.02 inc. VAT)
Dzus type 40 fastener with 13mm reach for panel fixing with easy removal. 16mm dia slotted countersunk head on panel fixing plate 38mm x 22mm, cadmium plated. 1/4 turn to lock on to wire spring...
Price from: £8.10 each (£9.72 inc. VAT)
small swivel catch for panels etc, chrome finish, base 32.5 mm x 22.5mm, holes centres 24mm long side, 14mm short side, length of arm centre to tip 35mm. lever locates at 90 degree positions to...
Price from: £9.65 each (£11.58 inc. VAT)
larger swivel catch for panels etc, chrome finish, base 40mm x 25.5mm, holes centres 29mm long side, 16mm short side, length of arm centre to tip 48mm. lever locates at 90 degree positions to...
Price from: £18.05 each (£21.66 inc. VAT)
fitted to top hood rail, to locate on to 14mm diameter peg on windscreen frame. (hole can be opened out) chrome on brass. base 63mm x 13mm.
Price from: £6.20 each (£7.44 inc. VAT)
set of two castings (male and female) approx 43mm long x 17mm wide, self colour brass. for aligning and positioning hood stays when frame is lowered.
Price from: £15.10 each (£18.12 inc. VAT)
small over-centre catch, base 65mm x 32mm, overall 80mm, chrome on brass.
six mount holes - 23mm centre horizontal, 35mm centre vertical. the single furthest holes measure 50mm apart.
Price from: £15.10 each (£18.12 inc. VAT)
small over-centre catch, base 70mm x 32mm, overall 80mm, shaped top, chrome on brass.
Price from: £23.25 each (£27.90 inc. VAT)
medium over centre catch, base 77mm x 26mm, 105mm overall, chrome on brass.
six mount holes on base - horizontal 15mm centres, 52mm vertical centres and the middle holes are 69mm centres approx.
Price from: £0.00 Each (£0.00 inc. VAT)
small safety throw over type catch, base size approx 67mm x 22mm (supplied handed) chrome on brass.
Price from: £6.80 Each (£8.16 inc. VAT)
small safety throw over type catch, base size approx 67mm x 22mm (supplied handed) chrome on brass.

Price from: £6.80 Each (£8.16 inc. VAT)
small safety throw over type catch, base size approx 67mm x 22mm (supplied handed) chrome on brass.

Price from: £13.70 each (£16.44 inc. VAT)
chrome on brass. can be locked with small padlock (not supplied). base 75mm x 30mm, overall 93mm.
base has 4 mounting holes and top bracket has 2 mounting holes.
Price from: £0.00 Each (£0.00 inc. VAT)
small throw over type safety catch, base size approx 45mm x 28mm (supplied handed) chrome on brass. approx 31mm horizontal hole centres when fitted.
Price from: £6.05 Each (£7.26 inc. VAT)
small throw over type safety catch, base size approx 45mm x 28mm (supplied handed) chrome on brass. approx 31mm horizontal hole centres when fitted.

Prices shown include VAT @ 20% where applicable