clips to the rubber/sponge (SR24), fits to door/door appature.
measures: 13.5mm overall, suits 6mm hole
measures: 13.5mm overall, suits 6mm hole
Parts
Used to hold badges to panels, when originals are no longer available. Will fit a mounting post approx 5.5mm, outside diameter 14.5mm. sold in packets of 10.
Used to hold badges to panels, when originals are no longer available. Will fit a mounting post approx 4.9mm, outside diameter 11.6mm. Sold in packets of 10.
clip to fit to bottom bead of weatherstrip, and vertical edge on door panel, per packet of 10 pieces
arrow head spring clip, approx 17mm across base, 11mm widest point on arrow, 17mm deep, per packet of 10 pieces
push fit panel clip, domed head, mat black finish, all metal constrction.
size measures: head 15mm diameter, length 20mm (under head) to suit 7mm hole.
priced each,
price will be reduced by 15%...
size measures: head 15mm diameter, length 20mm (under head) to suit 7mm hole.
priced each,
price will be reduced by 15%...
edge or hole fitting panel clip, fits into a 8mm hole with 12mm reach, bottom slot with accept 3mm thick board, overall dimensions 18mm tall x 16mm wide, per packet of 10 pieces
double barbed spring clip for fitting under push on door trim.
10mm depth. to push over about 2mm panel. per packet of 10 pieces
10mm depth. to push over about 2mm panel. per packet of 10 pieces
spring clip with 4mm gap U, for retaining headlining or weatherstrip, per packet 10 pieces
Spring clip with 3mm gap U, for retaining headlining or weatherstrip, per packet of 10 pieces
Plastic top hat badge fixing cup, fits into 5/16" panel hole and accepts an 1/4" pin with 5/8" flange.
Black plastic socket for fitting badges with mounting posts, fits into panel hole 4mm to take 3mm post, sold in packets of 10.
Plastic top hat badge fixing cup, fits into 3/16" panel hole and accepts an 1/8" pin.
Plastic top hat badge fixing cup, fits into 7/32" panel hole and accepts an 5/32" pin.
Plastic top hat badge fixing cup, fits into 1/4" panel hole and accepts an 3/16" pin.
clip "Ford type" for weatherstrip, fits into side slot. dimensions approx 16mm long, 13mm high, gripper width max 2.5mm. per packet of 10 pieces
'plate fixing' clips - arrow head clips fits into front of plate which is held with spikes in rear of panel, per packet of 10 pieces, for measurements see 883c and 883p.
trim panel fixing clip, rear push through clip holder only, 25mm long 12mm wide, prongs 7mm deep.
per packet of 10 pieces
per packet of 10 pieces
window channel retainer clip, ' U ' shaped clip which pushes into a 15.5mm (approx) channel, and accepts a 14mm window channel as our 488, has inner and outer gripping tangs which holds clip...
Moulding Clip/Rivet, for fixing body moulding strips to vehicle side. to fit moulding with approx 14mm gap supplied with fixing rivet for 3mm. sold each.
Prices shown include VAT @ 20% where applicable
