| This category contains 63 part(s). |
|
| CA1165 - acetylene gas lamp burner |
 |
acetylene gas burners for carbide lamps offered as shown. these are new old stock and the brass will show some tarnish marks. as shown on the bigger image:
left - threaded base (taper thread from 6. |
| £5.00 for 1 each View part »» |
|
| 378BRC - BRC lamp plaque |
 |
BRC lamp oval plate - engraved copper.
marked B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA
measures 59mm x 26mm |
| £11.00 for 1 each View part »» |
|
| 422 - bulb holder |
 |
single ended bulb holder. rear nut removes to expose terminal contacts. double contact. |
| £10.35 for 1 each View part »» |
|
| CA605 - bulb holder |
 |
useful bulbholder (BA15) with bracket, which can be bent as necessary. offered in single contact or double contact.
|
| £6.40 for 1 each View part »» |
|
| 254 - bulb holder plug |
 |
plug for SBC type holder, double contact. also offered in single contact. |
| £5.80 for 1 each View part »» |
|
| 153 - bulbholder |
 |
replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
single contact parallel pin, double contact parallel pin, double contact offset pin. (pin r |
| £6.65 for 1 each View part »» |
|
| 424 - bulbholder |
 |
double contact bulbholder for our 297 (Lucas 1130) sidelamp, accepts double contact SBC Ba15d bulbs |
| £10.70 for 1 each View part »» |
|
| CA-265A - Chrome cover |
 |
Chrome on Brass cover for the 265 lamp |
| £9.80 for 1 each View part »» |
|
| 767G - D lamp base gasket |
 |
body to base gasket for D Lamp |
| £0.75 for 1 each View part »» |
|
| 767GS - D lamp front gasket |
 |
glass to body gasket for split lens D Lamp |
| £0.75 for 1 each View part »» |
|
| 767S - D lamp replacement red lens |
 |
replacement red glass for split D lamp |
| £8.50 for 1 each View part »» |
|
| 177 - D lamp rim for Lucas model 288-3 box lamp |
 |
replacement chrome finish D lamp rim (Lucas 523333) for the Lucas box type 288-3 rear number plate lamp on the rear number plate box assembly. this is retained by a side hinge pin, and retained shut |
| £27.00 for 1 each View part »» |
|
| 767A - D lamp side lens |
 |
clear side lens for number plate window for D Lamp |
| £3.25 for 1 each View part »» |
|
| 767W - D lamp wire clip |
 |
glass retaining wire for D Lamp |
| £1.60 for 1 each View part »» |
|
| A-13040-S - dome head bolt kit |
 |
shallow dome head lamp base repair kit. approx 11mm diameter across head, stem approx 4.5mm thread x 12mm long. polished stainless steel, supplied with hex nuts. per packet of 12 parts
suitable for using fixing bonnet panels to hinge. |
| £4.85 for 1 pack View part »» |
|
| 253 - double end bulbholder |
 |
double contact holder which accepts a plug or standard SBC bulb at either end. threaded outside body. we also offer this item in single contact guise |
| £10.45 for 1 each View part »» |
|
| 361A - front lens ring seal |
 |
rubber rens O ring for our 297 (Lucas 1130) sidelamp. |
| £0.45 for 1 each View part »» |
|
| 853 - headlamp bulb holder |
 |
double contact headlamp converter for most Lucas headlamps which are mounted through the rear of reflector bowl (usually held in place with clamp clip not supplied). |
| £6.75 for 1 each View part »» |
|
| 863A - headlamp rim catch |
 |
chromium rim catch for Lucas head lamps, long type |
| £7.00 for 1 each View part »» |
|
| 863B - headlamp rim catch |
 |
chromium plated rim catch, for Lucas head lamps, short style, use with wire 864 |
| £6.35 for 1 each View part »» |
|
| E04C-13016 - headlamp rim catch |
 |
chrome plate bracket. |
| £4.50 for 1 each View part »» |
|
| 864 - headlamp rim clip wire |
 |
spring (spectacle shape only) for rim using short rim catch clip |
| £1.58 for 1 each View part »» |
|
| E1ADKN-13047/50 - headlamp rim screw and nut |
 |
chrome plated |
| £5.00 for 1 each View part »» |
|
| 632 - headlamp stem nut |
 |
hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). (approx 16mm bore) |
| £2.00 for 1 each View part »» |
|
| 632B - headlamp stem nut Lucas RB160 type |
 |
brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc type lamp. thread 1/2" x 26 tpi
as Lucas part 500357 |
| £2.50 for 1 each View part »» |
|
| 629C - headlamp stud - Butler type |
 |
headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread). measures approx 68mm long x 16mm thread diameter. |
| £6.00 for 1 each View part »» |
|
| 629D - headlamp stud - CAV type |
 |
headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter. |
| £6.00 for 1 each View part »» |
|
| 629B - headlamp stud - early Lucas |
 |
headlamp mounting bolt (hollow) with loose collar. thread 5/8" x 26 tpi ( fine thread) as original. measures approx 50mm long x 16mm thread diameter. |
| £6.00 for 1 each View part »» |
|
| 629A - headlamp stud - late Lucas |
 |
headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread) as original. measures approx 56mm long x 16mm thread diameter. |
| £6.00 for 1 each View part »» |
|
| 629E - headlamp stud - P100, P80, RB160 |
 |
P100, P80, RB160 headlamp mounting bolt. thread 1/2" x 26 tpi ( fine thread) as original. measures approx 85mm long x 13mm thread diameter (thread runs for 24mm). |
| £6.00 for 1 each View part »» |
|
| visor - headlamp visor |
 |
headlight peak for 7" lights, stainless steel, clips behind inner headlight rim. |
| £8.10 for 1 pair View part »» |
|
| 642 - headlamp W wire |
 |
W wire clip to hold glass into headlamp rim, approx 35mm long |
| £0.52 for 1 each View part »» |
|
| 642L - headlamp W wire - P100 type |
 |
large W wire for holding glass into rim, approx 60mm long side. this clip is actually made for P100 lamps. |
| £1.45 for 1 each View part »» |
|
| 628 - lamp entry grommet |
 |
rubber lamp entry cable grommet. approx 13.5mm internal diameter. |
| £1.95 for 1 each View part »» |
|
| 695 - lamp Lucas medallion |
 |
red dot Lucas medallion for our 297A (Lucas 1130) sidelamp. |
| £2.20 for 1 each View part »» |
|
| 632A - lamp mount nut |
 |
hexagonal nut for Lucas type lamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore. |
| £2.00 for 1 each View part »» |
|
| 631 - lamp mount stud and nut |
 |
lamp mounting bolt (hollow). thread 7/16" x 26 tpi ( fine thread) as original. measures approx 36mm long x 11mm thread diameter. supplied with hexagon nut. used on various Lucas spot and sidelamps. |
| £6.25 for 1 each View part »» |
|
| 787A - lamp mounting rubber |
 |
rubber mounting pad for our 787 (Lucas 516 sidelamp) |
| £1.60 for 1 each View part »» |
|
| 642A - long headlamp W wire clip |
 |
large W wire spring clip for holding glass into rim. approx 62mm long side. useful for deep headlamp rims. |
| £0.70 for 1 each View part »» |
|
| CA1283 - Lucas enamel badge |
 |
large LUCAS enamel badge (4 colour), for tops of some larger Lucas lamps, 19.3mm wide x 22.5mm tall. offered in chrome or nickel (please specify). |
| £9.50 for 1 each View part »» |
|
| 516luc - Lucas lamp badge medallion |
 |
reproduction Lucas King of the Road badge. chrome plate (nickel to order) brass castings with lugs on rear to peen over and secure as original. we stock the following sizes (measure overall diameter o
please note that a smaller hole is required for fitting. |
| £4.10 for 1 each View part »» |
|
| 927 - MBC bulbholder |
 |
MBC bulbholder, useful general application spare for minaiture base cap bulb |
| £1.75 for 1 each View part »» |
|
| 357-PF - pre-focus headlamp connection with lead |
 |
pre-focus headlamp connector with lead, double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall length 910mm. |
| £10.00 for 1 each View part »» |
|
| 570base - Raydyot lamp base only |
 |
base mounting bracket for Raydyot spotlamp. (fits in place of side mounting arm). approx 65mm overal diameter, chrome on brass.
|
| £12.00 for 1 each View part »» |
|
| 570A - Raydyot lamp mounting arm only |
 |
replacement side mounting bracket for Raydyot spotlamp. approx 106mm overall, chrome on brass.
|
| £35.00 for 1 each View part »» |
|
| 776S - rear lamp side lens |
 |
spare clear side lens for round 'Pork Pie' rear lamp. |
| £2.50 for 1 each View part »» |
|
| CA1190B - red lamp STOP lens |
 |
all glass red lens for Duolamp lamp with embossed Stop on top part.
|
| £9.00 for 1 each View part »» |
|
| 288L - red lens for L582 lamp |
 |
replacement red plastic lens with brass inner screw thread for our 288 lamp, equivalent to Lucas L582 |
| £6.00 for 1 each View part »» |
|
| LR576 - replacement 576 lamp unit - driving |
 |
replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). plain dome lens with chrome centre dot. order bulb separately - single contact type base P22s |
| £29.00 for 1 each View part »» |
|
| FT576 - replacement 576 lamp unit - fog |
 |
replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). block pattern dome lens with chrome centre dot. order bulb separately - single contact type base P22s |
| £29.00 for 1 each View part »» |
|
| 361 - replacement front lens |
 |
plastic front lens for our 297 (Lucas 1130) sidelamp. |
| £6.00 for 1 each View part »» |
|
| 681 - replacement front lens |
 |
original pattern frosted lens with chrome rim for our 297 (Lucas 1130) sidelamp |
| £11.00 for 1 each View part »» |
|
| 570G - replacement glass lens |
 |
replacement front glass lens for Raydyot spot lamp 570. measures 104mm diameter. |
| £5.00 for 1 each View part »» |
|
| 211L - replacement lens |
 |
replacement glass lens for 211 Duolamp, specify all red or split amber/red |
| £9.00 for 1 each View part »» |
|
| 776R - replacement lens |
 |
spare red glass lens for round 'Pork Pie' rear lamp, specify flutes running as picture vertical OR horizontal |
| £5.00 for 1 each View part »» |
|
| CA1247L - replacement oval lens |
 |
replacement red colour main front lens for lamp |
| £12.75 for 1 each View part »» |
|
| 516rot - Rotax lamp badge medallion |
 |
reproduction Rotax badge. chrome plate (nickel to order) brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
very sma
please note that a smaller hole is required for fitting. |
| £4.10 for 1 each View part »» |
|
| 357-SB - sealed beam headlamp connector with lead |
 |
sealed beam headlamp connector with lead, nylon block three lucar connector, three wires with headlamp bowl sealing grommet and soldered bullets, overall length 850mm. |
| £5.75 for 1 each View part »» |
|
| 865 - side lamp rim retain screw |
 |
top rim retaining screw for Lucas 1130 type sidelamp. |
| £1.30 for 1 each View part »» |
|
| 424A - sidelamp bulbholder (twin bulb) |
 |
two bulb (yellow for flasher, clear for sidelamp) - 12 volt ONLY - bulbholder for fitting into Lucas type 1130 sidelamps. supplied in pairs only with a spare amber bulb. |
| £41.50 for 1 pair View part »» |
|
| 642s - small lamp wire |
 |
small w wire clip for sidelamps, packet of 6 pieces |
| £1.80 for 1 packet View part »» |
|
| 577rim - spare lamp rim |
 |
replacement chrome plated lamp retaining rim for Lucas L471 type rear lamps |
| £4.00 for 1 each View part »» |
|
| 250 - spare lens |
 |
domed red or amber main lens for our 257 lamp. base 60mm diameter measured overall. |
| £4.50 for 1 each View part »» |
|
