Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Solder type banjo union supplied complete 1/8" BSP with bolt and washers. The 5/16" copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
Solder type banjo union supplied complete with 1/4"BSP bolt and washers. The 5/16 " copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
Solder type banjo union supplied complete with 3/8" BSP bolt and washers. The 3/8" copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
Banjo union supplied complete with bolt and washers for Solex carbs. Banjo body is machined with a 1/4" hole into which 1/4" pipe is directly soldered. Brass body, steel bolt with washers. Thread...
Solder type banjo for SU type carburetters - 5/16 " outer diameter copper pipe is soldered into the banjo socket. Cast, machined brass. Recessed sealing face outer diameter 22.25mm, flat sealing...
Solder type banjo for SU type carburetters - 5/16 " outer diameter copper pipe is soldered into the two banjo sockets. Machined brass with silver soldered socket connections at 90 degrees....
Solder type banjo for SU type carburetters - 5/16 " outer diameter copper pipe is soldered into the two banjo sockets. Machined brass with silver soldered socket connections at 180 degrees....
Male threaded type banjo for SU type carburetters - with 1/4" BSP male thread with 60 degree cone for solder nut and nipple connection. Please see part numbers CA121 for 1/4" BSPP nut...
Male threaded type banjo for SU type carburetters - with twin 1/4" BSP male threads at 90 degrees, both with a 60 degree cone for solder nut and nipple connection. Please see part numbers CA121...
Male threaded type banjo for SU type carburetters - with twin 1/4" BSP male threads at 180 degrees, both with a 60 degree cone for solder nut and nipple connection. Please see part numbers...
Push on connection type banjo for SU type carburetters - with single plain connection for 5/16" ID fuel hose. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Machined brass with...
Push on connection type banjo for SU type carburetters - with single barbed connection for 5/16" ID fuel hose. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Machined brass with...
Push on connection type banjo for SU type carburetters - with twin barbed connection for 5/16" ID fuel hose at 90 degrees. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Machined...
Push on connection type STEEL banjo for SU type carburetters - with single plain connection for 5/16" ID fuel hose. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Recessed sealing...
Push on connection type STEEL banjo for SU type carburetters - with single barbed connection for 5/16" ID fuel hose. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Recessed...
Push on connection type STEEL banjo for SU type carburetters - with single barbed connection for 1/4" ID fuel hose. Secure hose with nut and bolt fuel pipe clip or swaged ferrule. Recessed sealing...
Brass SU type banjo bolt that fits T1, T2 & T4 float chamber lids. 3/8" BSPP thread. 24mm long under hex head (22mm long under shoulder) 16.6mm diameter plain section, 5.9mm diameter through...
Steel SU type banjo bolt that fits T1, T2 & T4 float chamber lids. 3/8" BSPP thread. 24mm long under hex head (22mm long under shoulder) 16.6mm diameter plain section, 5.9mm diameter through...
Brass AC filter banjo. 23.2mm outer diameter of sealing faces. 15.4mm inner diameter one face, 13.3mm inner diameter the other face. 13.7mm wide banjo head. Solder socket for 3/8" OD copper pipe.
Brass AC filter banjo. 23.2mm outer diameter of sealing faces. 15.4mm inner diameter one face, 13.3mm inner diameter the other face. 13.7mm wide banjo head. Barbed hosetail for 5/16" ID fuel fipe....
Steel AC filter banjo. 22.2mm outer diameter of sealing faces. 16mm inner diameter one face, 12.8mm inner diameter the other face. 16mm wide banjo head. Barbed hosetail for 5/16" ID fuel fipe....
Brass SU type over flow banjo with solder socket for 3/16" OD copper pipe. 21mm outer diameter of sealing faces. 13mm inner diameter one face, 10mm inner diameter the other face. 9.5mm wide banjo...
Single banjo coupling with 1/4" compression fitting and 1/4" BSP thread