| This category contains 12 part(s). |
|
| CA1350 - boa constrictor (serpent head) horn |
 |
large snake head (serpent head) horn/trumpet. overall length of this reproduction item is approx 2100mm. the serpent head is pressed (not a casting), has glass eyes and fork tongue, and the taper flex
we can offer replacement flexible brass tube to repair original horns if required - please contact us. |
| £532.00 for 1 each View part »» |
|
| CA1387 - Bull horn |
 |
a modern variation of the traditional 'bull horn', making plenty of noise. the robust electric 12 volt horn is operated by a control lever in the cockpit. this is quite a large unit measuring some 20 |
| £36.00 for 1 each View part »» |
|
| CA-323 - Button: Bosch horn |
 |
Two terminals for wood dash. This button is very similar to the vintage model but has a clip-on cover in place of the early threaded variety. 1 3/8'' (35mm) diameter. |
| £28.75 for 1 each View part »» |
|
| CA795 - horn button - Klaxon |
 |
horn push buttonengraved Klaxon, flange for mounting on to dash, button head approx 38mm dia. mounting flange 53mm x 35mm with two screw hole.
|
| £21.25 for 1 each View part »» |
|
| 923 - horn reed |
 |
brass horn reed, threaded end, approx 13.5mm diameter x 65mm long. |
| £13.50 for 1 each View part »» |
|
| CA324A - klaxon horn button |
 |
surface mounted horn press button engraved Klaxon. stainless steel case and rim. black button engraved. mounting hole centres 53mm, body approx 41mm diameter. |
| £25.00 for 1 each View part »» |
|
| CA883 - large electric horn |
 |
large and noisy 12 volt electric horn , approx 150mm diameter x 90mm deep (front to back). chrome grill, mounting arm supplied.
|
| £22.90 for 1 each View part »» |
|
| CA1330 - motor horn - bugle |
 |
a fine reproduction of the Lucas double twist motor bugle horn. approx 500mm long overall, supplied with rubber bulb, mounting bracket and gauze over front grill opening. very similar to that fitted i |
| £55.00 for 1 each View part »» |
|
| CA324 - push horn button |
 |
surface mounted, metal cased push button. suitable for horn press button etc. mounting hole centres 53mm, stainless steel rim approx 41mm diam, black button. |
| £10.50 for 1 each View part »» |
|
| CA884 - small electric horn 12 volt |
 |
small 12 volt electric horn with chrome grill. approx 100mm diameter a 55mm deep. single hole fixing bracket
|
| £10.10 for 1 each View part »» |
|
| CA884A - small electric horn 6 volt |
 |
small 6 volt electric horn with chrome grill. approx 100mm diameter a 55mm deep. single hole fixing bracket
|
| £10.10 for 1 each View part »» |
|
| CA1350-TUBE - taper brass flexible horn tube |
 |
good quality taper brass flexible horn tube - for reapir of boa horns. 1500mm length, 59mm large end, 16.5mm small end outside diameters. wall thickness aprox 2.5mm. |
| £200.00 for 1 each View part »» |
|
