| This category contains 9 part(s). |
|
| 894 - bonnet stud |
 |
plated dome brass stud to go on to top panel of bonnet to prevent 'chattering' when the two top panels fold on to each other, 16mm diameter, choice of shallow, approx 8mm high or deep 12mm high, chrom |
| £3.55 for 1 each View part »» |
|
| 481 - bumper bolt |
 |
chromium plated dome head bolt with flats beneath (supplied with washer and nut). choice of round head 14.5mm head diameter x 26mm long x 5/16" (approx 8mm) thread OR flat head 15.7mm head diameter x |
| £1.28 for 1 each View part »» |
|
| 482 - bumper bolt |
 |
chromium plated round head bolt with flats beneath, 37mm long x 3/8" thread. |
| £1.28 for 1 each View part »» |
|
| 889A - oval head bumper bolt |
 |
oval head, chromium plated bumper bolt, 25mm x 16mm approx. 5/16"BSW (approx 8mm) thread. |
| £4.25 for 1 each View part »» |
|
| 889B - oval head bumper bolt |
 |
oval head chromium plate bumper bolt, 35mm x 22mm appox. 3/8BSW (approx 10mm) thread. |
| £4.50 for 1 each View part »» |
|
| 235b - wing mounting bolt |
 |
mushroom head bolt for securing mudguards/fender to stays. approx 22mm diameter head, stud 32mm long threaded 1/4" BSW (approx 6mm), zinc plated on steel. each or bulk pack of 50 (£36.50). |
| £0.85 for 1 each View part »» |
|
| CA1017B - wing/mudguard bolt |
 |
large flat head steel wing mounting bolt, head 32mm diameter, thread 3/8BSW x 38mm under head. 9.5mm square shank under head. new old stock, limited quantity.
|
| £3.80 for 1 each View part »» |
|
| CA1017D - wing/mudguard bolt |
 |
large flat head wing mounting bolt, head 24mm diameter, thread 10mm x 25mm under head. 10mm square shank under head. zinc plated.
|
| £2.00 for 1 each View part »» |
|
| CA1017A - wing/mudguard bolt |
 |
large flat head steel wing mounting bolt, head 25mm diameter, thread 5/16"BSW x 38mm under head. 8mm square shank under head. |
| £3.00 for 1 each View part »» |
|
