Heavy black metal cover held with a screw knob, bakelite base fuse box. two terminals to wind round the fuse wire selected. base 72mm x 72mm, x depth 50mm (does not include the screw knob height)....
Parts
tax disc holder, chrome plate on brass screw on rim with stainless steel back and bracket, single mounting hole (for 10mm bolt). supplied with rubber seal
1932-33, double cup race & two taper roller bearings Outer diameter measures - 2.436" (61.99mm), inside diameter - 1.185" (30.18mm), overall depth 1.427" (36.27mm).
original wall hanging cut away detail print, used for educational purpose, gloss finish on linnen backing. measures 1010mm x 760mm
Originally Printed by The Ford Motor Company, Facilities Department, wall hanging, cut away section view detail print of a drawing, of a twin rear wheel axle, Ford Commercial Vehicle. shows the...
original lucas trafficator switch lens/screw cover, as fitted to the SD84 dash/panel switch. Ivory screw cover with red warning lens and washer to keep bulb making contact with lens.
deep red glass moulded lens of bulls eye pattern
measures 74mm diam x 23mm deep approx
lovely deep rich red/maroon colour
(clear but so deep you can not actually see through it)
have nice...
measures 74mm diam x 23mm deep approx
lovely deep rich red/maroon colour
(clear but so deep you can not actually see through it)
have nice...
pair new/old stock window regulators, standard pattern which can be altered to suit various applications, mounting plate dimensions 160mm x 105mm with hole centres at 110mm & 85mm, lifting arm...
maroon short pile velour cloth for covering trim panels, wheel arch or back of seats. roll is 1250mm wide.
this is stiffer than the moquette cloth.
limited availability.
this is stiffer than the moquette cloth.
limited availability.
small plate, letters engraved into polished aluminium sheet, approx 102mm x 63mm. requires holes drilling for fixing bolts.
small plate, letters engraved into polished aluminium sheet, approx 102mm x 63mm. requires holes drilling for fixing bolts.
small plate, letters engraved into polished aluminium sheet, approx...
small plate, letters engraved into polished aluminium sheet, approx...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
0.375" (9.53mm) pitch, 0.25" (6.35mm) roller diameter, 0.225" (5.7mm) between inner plates, 2000lb (910kg) breaking load. as Reynold BS series simple chains.
note that the code number indicates...
note that the code number indicates...
reconditioned cork clutch plate for Morris Oxford 16hp 1933-35. overall diameter 250mm with 32mm diameter 6 spline centre, 56 corks, aluminium plate with steel insert centre.
hidem banding, 16mm wide, leathercloth covered.
hidem banding, 16mm wide, leathercloth covered.
hidem banding, 16mm wide, leathercloth covered, offered in DARK GREEN, MID GREEN only. TO CLEAR
hidem banding, 16mm wide, leathercloth covered, offered in DARK GREEN, MID GREEN only. TO CLEAR
Snap-on draught excluder, plush moquette covered (furry appearance) with draught excluder rubber approx 10mm diameter attached. Cut length clearance stock being sold at a discounted price
shortened and slightly mis-shaped side hinge (inconsistent folding) 3/16" (4mm) pin, 18swg (1.2mm), approx 1.1/4" (approx 32mm) open, overall length 40" inches (1.15m), being offered at a reduced...
ex display free standing chrome body rectangular indicator lamp with amber lens, lens 40mm x 25mm, 40mm deep, mounting by single 10mm bolt through which wire passes. please note that this unit...
ex display chrome mirror arm 70mm long stem, mounts through 16mm hole in panel, with swing back spring(protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4AF nut. supplied...
good used set of three small hood frames, two piece brass construction (painted black) held together with 10 screws, 3.5mm gap for glazing material, overall dimensions 200mm x 102mm, frame size...
Prices shown include VAT @ 20% where applicable