Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these hinges in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 1/4"...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these hinges in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 1/4"...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these hinges in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 1/4"...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles. We supply these hinges in sets of one top hinge and two side hinges OR as individual hinges:
Top hinge 1/4"...
Chrome plated hinge with securing studs on rear to fit through panel. used as original part on Morris Minor as boot hinge. base 212mm x 22mm overall. three securing studs, supplied with nuts. NOTE...
811.43677Chrome on brass fitting. Base 48mm x 19mm, mounting holes 32mm centres.
810.4522Chrome on brass fitting. Base approx 45mm x 16mm, 28mm deep overall. Mounting holes 31mm centres.
810.4522Chrome on brass fitting. Base 45mm x 16mm, mounting holes 32mm centres.
810.4522Cast iron type van door hinge 80mm wide x 76mm tall. Left hand and right hand available. Please note illustration shows left hand part.
807.1359Replacement 18mm diameter brass conical ball for self aligning hinge, tapers down to 8.5mm at the top, 17.5mm tall with a 7.2mm hole.
805.73596Chrome plated hinge with securing studs on rear to fit through panel. Used as original part on Morris Minor 1951 onward as bonnet hinge. Base 191mm x 26mm overall. Four securing studs, supplied...
748.0842Replacement brass half ball (19mm diameter) with hexagon base (11.6mm across flats) for steel self aligning hinges.
744.24316Large cast iron type van door hinge 150mm wide x 102mm tall. Left hand and right hand available. Note illustration shows left hand item. One pair remaining.
743.29895Replacement hinge pin, spring, tag washer and nut for 64mm tall steel self aligning hinge. Please order brass ball separately. Dimensions, overall length 77mm (73mm under countersink), 6mm...
681.1693Replacement hinge pin, spring, tag washer and nut for 51mm tall steel self aligning hinge, order brass ball separately. Dimensions, overall length 65mm (61mm under countersink), 6mm diameter...
681.1693Replacement hinge pin, spring, tag washer and nut for 38mm tall steel self aligning hinge. Order brass ball separately. Dimensions overall length 47mm (43mm under countersink), 6mm diameter...
679.8872Chrome on brass folded centre bonnet strip. 1270mm (50") long, 21mm wide. Side panels are folded and slide in place. This part will need to be cut shorter by user for some applications. If sent at...
671.5317Chrome on brass folded centre bonnet strip, 845mm length (33.25") 21mm wide. Side panels are folded and slide in place. This part is offered in the longer length for the listed vehicles. The...
671.5317Brass folded centre bonnet strip. 60 inch length specially commissioned for long bonnet applications. 21mm wide and same profile as part number 16632. Side panels are folded and slide in place....
671.5317Replacement spherical brass hinge pin ball, 5/8" (16mm) diameter
669.5123Replacement spherical brass hinge pin ball, 3/4" (19mm) diameter with 7mm hole in the centre
667.4696Solid brass undrilled, steel pin, flap size 2" high x 4" wide (approx 50mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of...
666.4561Heavyweight, stainless folded type top bonnet hinge, 3/8" (10mm) brass pin, 16swg stainless steel flap folded towards pin. Approx 45mm when open, 50mm knuckles, 54" (1.37m) long.
574.80664Heavy brass door hinge, undrilled flaps. 2 1/2" high x 4" wide (approx 63mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of...
571.423Chrome plated boot or bonnet hinge with securing studs on rear to fit through panel. Used on Lotus Elan, TVR. Hillman Imp, Reliant and kit cars. Base 135mm x 22mm overall. Three securing studs,...
568.28937Solid brass undrilled, steel pin, flap size 1 3/4" high x 4" long (approx 45mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end...
568.20715Solid brass undrilled, steel pin, flap size 1 3/4" high x 2" wide (approx 45mm x 50mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end...
568.20715Solid brass undrilled, steel pin, flap size 1 1/2“ x 4" (approx 38mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of...
568.20715Solid brass undrilled, steel pin. Flap size 1 1/2“ high x 2" wide (approximately 38mm x 50mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm...
568.0039Self aligning, maleable iron van door hinge 66mm tall x 57mm wide. Left hand and right hand available. Please note illustration shows right hand part. Also note that the weight of the door is...
566.776Self aligning, maleable iron van door hinge 66mm tall x 57mm wide. Left hand and right hand available. Please note illustration shows right hand part. Also note that the weight of the door is...
566.776Self aligning, maleable iron van door hinge 66mm tall x 57mm wide. Left hand and right hand available. Please note illustration shows right hand part. Also note that the weight of the door is...
566.776Self aligning, maleable iron - self colour. Flaps un-drilled, size 2" x 5" (approx 50mm x 125mm), left hand and right hand. Note the swinging part sits on the brass ball which sits in the cup of...
566.57275Self aligning, maleable iron - self colour. Flaps un-drilled, size 2" x 5" (approx 50mm x 125mm), left hand and right hand. Note the swinging part sits on the brass ball which sits in the cup of...
566.57275Self aligning, maleable iron - self colour. Flaps un-drilled, size 2" x 5" (approx 50mm x 125mm), left hand and right hand. Note the swinging part sits on the brass ball which sits in the cup of...
566.57275Heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. Offered in various lengths.
456.9145Heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. Offered in various lengths.
Heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. Offered in various lengths.
Heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. Offered in various lengths.
please note that this...
Heavy bonnet hinge, 3/8" (10mm) diameter pin, 16 swg (1.6mm) flaps, 75mm across flaps when open, 51mm knuckles. 5ft/1.52m long only. Brass or stainless steel flaps with stainless pin
456.33807Heavy bonnet hinge, 3/8" (10mm) diameter pin, 16 swg (1.6mm) flaps, 75mm across flaps when open, 51mm knuckles. 5ft/1.52m long only. Brass or stainless steel flaps with stainless pin
heavy bonnet...
Heavy bonnet hinge, 3/8" (10mm) diameter pin, 16 swg (1.6mm) flaps, 75mm across flaps when open, 51mm knuckles. 5ft/1.52m long only. Brass or stainless steel flaps with stainless pin
heavy bonnet...
Medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles. Offered in specific lengths.
455.17953Medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles. Offered in specific lengths.
please note...
Medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles. Offered in specific lengths.
Medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles. Offered in specific lengths.
Chrome plated boot or bonnet hinge with securing studs on rear to fit through panel. Used on Triumph TR4, Spitfire, Herald, Nash Metropolitan, Standard 8 & 10. Base 123mm x 22mm overall. Three...
323.0217Original new/old stock Wingard 702A interior mirror, oblong FLAT glass (150mm x 60mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.
204.23907Original new/old stock Wingard 693A interior mirror, oblong FLAT glass (105mm x 42mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.
204.23907Chrome on brass eyelet as fitted to our 173 silk rope pulls, base dimensions are 46mm long x 14mm wide with screw holes at 32mm centres, loop is 13.6mm i/d x 21mm o/d.
204.23907Monza type cap - internal thread 2 1/2" (63mm) x 16 TPI. Overall approx 76mm x 100mm overall. Release button is opposite the hinge, under the lid.
116.4368Monza type cap - internal thread 2 1/2" (63mm) x 16 TPI. Overall approx 76mm x 100mm overall. Release button is opposite the hinge, under the lid.
Remanufactured item
Top swivels over to lock glass. Chrome finish on steel, base 35mm x 23mm, top 23mm tall (both measured to hinge pin). Price Each.
116.4368Monza type cap - polished light alloy or chrome plated finish - internal thread 2 3/4" (70mm) x 16 TPI. Measures approx 86mm x 114mm overall. Release button is opposite the hinge, under the lid.
97.96972Monza type cap - polished light alloy or chrome plated finish - internal thread 2 3/4" (70mm) x 16 TPI. Measures approx 86mm x 114mm overall. Release button is opposite the hinge, under the lid....
97.96972Monza type cap - internal thread 2" (51mm) x 18 TPI. Overall size approx 60mm wide x 82mm long x 28mm tall. Release button is opposite the hinge, under the lid.
97.96972Monza type cap - internal thread 2" (51mm) x 18 TPI. Overall size approx 60mm wide x 82mm long x 28mm tall. Release button is opposite the hinge, under the lid.
Re-manufactured pattern part
Folded steel side strip for sliding into bonnet strip, one piece 48"/1220mm long. Weld to flat panel. 25mm overall width (flange 14mm) Please note this item exceeds the dimensions for our standard...
80.077805Chrome plate end cover and clamp for centre strip. base 51mm x 13mm, holes 35mm apart.
79.228134Shallow dome head lamp base repair kit. Approx. 11mm diameter across head of bolt, stem approx. 4.5mm thread x 12mm long. Polished stainless steel, supplied with hex nuts. Per packet of 12 bolt...
76.96705Chrome plate on brass bonnet pin support plate with 5/16" (approx 8mm) hole. base 55mm x 18mm, countersunk mounting holes 36mm centres.
68.91423Chrome plate on brass fitting with 1/4" (approx 6mm) hole. Base 45mm x 15mm, mounting holes 31mm apart.
68.91423Chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
68.91423Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
59.291195Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
59.291195Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
59.291195Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
59.291195Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
59.291195Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
59.291195Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
59.291195Keyhole escutcheon - flap is hinged at the top and opens up against a spring. 2 hole (21mm centres) fixing in base plate - chromium finish. Approx 29mm diameter.
58.38984Shaped perspex wind deflector side screens with hinged fixings to fit MG or Morgan. May also be used on many other vehicles.
The wind deflector screen fixes with brackets to the end of the sports...
Shaped perspex wind deflector side screens with hinged fixings to fit MG or Morgan. May also be used on many other vehicles.
The wind deflector screen fixes with brackets to the end of the sports...
Shaped perspex wind deflector side screens with hinged fixings to fit MG or Morgan. May also be used on many other vehicles.
The wind deflector screen fixes with brackets to the end of the sports...
Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
47.24987Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
47.24987Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
47.24987Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
43.368088Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
43.368088Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
43.368088Reproduction interior rear view mirror equivalent to the pre-War Lucas 309L type. CONVEX mirror glass. Mirror head 4” by 1 ¾” (100mm x 43mm). Two screw hole base mount as shown,...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
An authentic reproduction of the Lucas L140 type headlamp used on many British cars in the 1930s and 40s, including those manufactured by Armstrong Siddeley, Austin, Hillman, Jowett, Lanchester,...
25.78228An authentic reproduction of the Lucas L148 type headlamp used on a number of British cars in the 1930's and 40's, including those manufactured by Morgan, Rover, Talbot and Wolseley. This lamp has...
25.78228An authentic reproduction of the Lucas L150 type headlamp used on a number of British cars in the 1930's and 40's, including those manufactured by Armstrong Siddeley, Austin, Commer, Daimler,...
25.78228An authentic reproduction of the Lucas L165 type headlamp used on a number of British cars in the 1930's and 40's, including those manufactured by Armstrong Siddeley, Austin, Daimler,...
25.78228An authentic reproduction of the Lucas L166 type headlamp used on a number of British cars in the 1930's and 40's, including those manufactured by Daimler, Humber, MG, Rover, SS Triumph and...
25.78228