Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F108 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 133.43 15.8 3 1/2 5.25315 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F123 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - 5330992097899

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.2 133.45 14.2 3.748031 5.253937 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F132 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 136.53 11.1 4 5.375197 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F148 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
111.1 136.63 12.7 4.374016 5.379134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F193 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 143.03 12.7 4 5.631102 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F205 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
109.934375 150.368 13.890625 4 21/64 5.92 35/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P F281 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
0 0 0
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P G104 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
133.3 158.9 14.2 5.248031 6.255906 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P G120 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
146 168.22 14.2 5.748031 6.622835 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P G129 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
104.7 160.38 14.2 4.122047 6.314173 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P L101 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 58.8264 12.7 1 9/16 2.316 1/2

CEP OS P NA001 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B101

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.9 28.65 9.5 0.625984 1.127953 0.374016 M/L(Std)
Fits Makes:
Willys Transfer box, Studebaker Trans. sel., Singer Gearbox, Rototiller Trans. shift, Massey Ferguson Sev. applic., Mack Water pump, J.A.P. engine Crankshaft, Internal. truck P.T.O. shift, Hillman Gearbox, Ford military Transfer box, Dennis Aux. trans, Daimler Fan, Cummins Fuel pump, Cockshutt Governor, Caterpillar Sev. applic., Case Sev. applic., Allis Chalmers Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA002 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B102

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 31.83 9.5 0.748031 1.25315 0.374016

CEP OS P NA003 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B104

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35 6.3 0.874016 1.377953 0.248031 M/R(B)
Fits Makes:
alternative , Wolseley Steering, Sunbeam pass. Steering, Rover Brake pedal, Riley Steering, Nuffield Governor, Morris pass. Steering, Metropolitan Steering, Hillman Steering, Harper , Commer Steering, Austin Healey Steering, Austin comm. Governor, Austin Steering

CEP OS P NA004 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B106

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 38.18 9.9 0.811024 1.50315 0.389764 M/L(Std)
Fits Makes:
Packard Water pump, Fordson tractor P.T.O shih, Dorman Governor, Caterpillar Sev applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA005 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B111

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 41.3 9.5 1 1.625984 0.374016

CEP OS P NA006 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B112

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 41.28 9.5 0.984252 1.625197 0.374016 M/L(Std)
Fits Makes:
Morgan Gearbox, Lansing Bagnall Gearbox, Jensen Gearbox, Ford Thames Sev. applic, Ford pass. Sev. apphc

CEP OS P NA007 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B113

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 41.3 9.5 0.874016 1.625984 0.374016 M/L(Std)
Fits Makes:
alternative , Morris comm. Fuel pump, Coles crane

CEP OS P NA008 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B114

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 43.66 11.1 1 1.718898 0.437008 M/L(Std)
Fits Makes:
Ford Thames Rear axle, Ford pass. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA009 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B115

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.53 11.1 1 1.75315 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA010 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B124

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 44.53 6.3 1.248031 1.75315 0.248031

CEP OS P NA011 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B125, 538309980171

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 46.53 11.1 1 1.83189 0.437008 M/L(Std)
Fits Makes:
Wolseley Gearbox, Waukesha Access. drive, Standard Sev. applic., Oliver-Cletrac Sev. applic., Morris Gearbox, Morgan Gearbox, M.G Gearbox, Mack Fan drive, Jaguar Gearbox, International Sev. applic., Hudson Trans. front, Hands trailer Axle, G.M.C. Sev. applic., Foden Air comp., Dodge truck P.TO. shaft, Commer Air comp., Caterpillar Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA012 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B133 M/L

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 48.18 12.7 1.248031 1.89685 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA014 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B141

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.47 9.5 1.248031 1.987008 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA015 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B146

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 28.68 9.5 1/2 1.129134 0.374016

CEP OS P NA018 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B157, 5330998015014

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.18 9.5 1 1.50315 0.374016 M/L(Std)
Fits Makes:
Wisconsin Reduct. gear, White Trans. shift, Studebaker Steering, Rover Governor, Oliver Cletrac Sev. applic, Massey-Ferguson Steering , Internal. tractor Steering, Hercules Water pump, Galion Steering, Euclid Steering, Chrysler grp. Sev. applic., Caterpillar Sev. applic., Case Sev. applic., Austin-Western Shifter, Allis Chalmers Sev. applic.

CEP OS P NA025 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B172

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 38.18 9.5 0.874016 1.50315 0.374016 M/L(Std)
Fits Makes:
White Aux. trans., Waukesha Acces. drive, Thornycroft Change spd, Scammell P.T.O sel, Reo Aux. trans, Massey-Ferguson Sev. applic., Mack Aux. trans., International Sev. applir, Hough Shifter arm, Hi-way trailer Axle, Hercules Water pump, G.M C Aux. trans, Gallon Transfer box, Dyson trailer Axle, Clark Hyd. pump, Caterpillar Sev. apphc, Case Trans shift, Buda Water, Bucyrus Erie Trans, Allis Chalmers Sev. Applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA026 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B175

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35 9.5 0.748031 1.377953 0.374016

CEP OS P NA027 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B180

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 46.53 9.5 1.374016 1.83189 0.374016 M/L(Std)
Fits Makes:
White Steering, Towmotor Steering, Oliver-Cletrac P T.O., Mack Steering, Internal. truck Steering, G.M.C. truck Stecrinq, Ford truck Steering
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA029 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B184

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.7 11.1 1.122047 1.877953 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA031 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B199

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9 46.53 11.1 1.059055 1.83189 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA032 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B200

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
14.2 35 7.9 0.559055 1.377953 0.311024

CEP OS P NA033 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B203

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
9.5 19.13 6.3 0.374016 0.75315 0.248031 M/R(B)
Fits Makes:
Wolseley Speedo., Triumph pass Speedo., Sunbeam pass. Speedo., Standard Speedo., Singer Speedo., Ruston Hornsby Speeder, Morns Speedo., Humber Speedo., Hillman Speedo., Dodge truck Speedo., Continental Tach. Shift, Commer Speedo., Aveling Barford Tyre pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA035 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B206

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 31.83 9.5 0.622047 1.25315 0.374016

CEP OS P NA037 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B215

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9 38.18 6.3 1.059055 1.50315 0.248031 M/R(B)
Fits Makes:
Rover Sev applic., Riley Distributor, Petter McLaren Extension shaft, Austin Healey Distributor
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA040 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B224

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 46.53 11.1 1.122047 1.83189 0.437008

CEP OS P NA042 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B227, 5330998039824

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 38.18 6.3 1.122047 1.50315 0.248031 M/R(B)
Fits Makes:
Rover Steering, Oliver Cletrac Tying Gear, Lea Francis Steering, Jaguar Steering, Daimler Steering, Burman Steering, Armstrong Sidd Steering, Alvis Steering

CEP OS P NA043 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B228, 100E-3591-B

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 30.23 6.3 0.811024 1.190157 0.248031 M/R(4B)
Fits Makes:
Standard Steering, Rover Front Susp, Ford-Thames Steering, Ford pass. Steering, Burman Steering

CEP OS P NA045 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B231, 5330998321989

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 28.65 6.3 0.622047 1.127953 0.248031 M/R(B)
Fits Makes:
Rover Brake shaft, Oliver-Cletrac Hyd Control, M.G Camshaft, Lagonda Timing case, Guy Gearbox, Foden Boost pump, Crossley Fuel pump, Conveyancer Torque conv, Aston Martin Timing case

CEP OS P NA046 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B244

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 44.6 9.5 1.248031 1.755906 0.374016 M/L(Std)
Fits Makes:
Packard Steering, Minne Moline Front Axle, Internal. truck Trans. Front

CEP OS P NA047 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B251

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 42.98 4.7 1.248031 1.692126 0.185039 M/R(BG)
Fits Makes:
Ross Steering, Rambler Steering, Packard Steering, M/Ferguson Steering, Mack Steering, International Steering, Gemmer Steering, Ford Steering, Diamond T Steering, Cockshutt Steering, Chrysler Steering, Allis Chalmers Steering

CEP OS P NA048 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B253, 5330995802558

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6 35 6.3 0.811024 1.377953 0.248031 M/R(B)
Fits Makes:
Perkins Fuel pump, B.S A. m/c Crankcase, Austin pass. Gearbox

CEP OS P NA049 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B255

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 25.48 6.3 1/2 1.00315 0.248031 M/R(B)
Fits Makes:
Vickers tractor Trans shaft, Rover Speedo., Hercules Water pump, Guy Speedo., A.J.S m/c Tele. Legs

CEP OS P NA050 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B256

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35 6.3 0.748031 1.377953 0.248031 M/R(B)
Fits Makes:
Thornycroft Exhauster, Rover Clutch pedal, Clayton - Dewandre Exhauster

CEP OS P NA052 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B269

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.7 15.8 1.311024 1.877953 0.622047 M/L(LDC)
Fits Makes:
Ford Trans Rear, Borg-Warner Trans Rear

CEP OS P NA053 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B271

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 23.9 4.7 0.622047 0.940945 0.185039 M/R(BG)
Fits Makes:
Studebaker Trans Shift, Rambler Trans Shift, Packard Trans Shift, Nash Trans Shift, Kaiser Trans Shift, Hudson Trans Shift, GM Trans Shift, Ford Trans Shift, Chrysler Trans Shift, Borg-Warner Trans Shift, BMC Group Trans Shift

CEP OS P NA054 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B272

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 38.18 9.5 0.748031 1.50315 0.374016 M/L(Std)
Fits Makes:
Internal tractor P.T.O brake, Fordson tractor Gearchange, David Brown Fuel pump, Crossley Servo motor

CEP OS P NA055 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B273

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 35.12 9.5 0.748031 1.382677 0.374016 M/R(4B)
Fits Makes:
Russell Newbery -, Leyland Cyl head, B.S.A. m/ c Crankshaft

CEP OS P NA056 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B275

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.8 28.65 9.5 0.622047 1.127953 0.374016 M/R(BD)
Fits Makes:
Wolseley Gearbox, Rover Gearbox, Riley Gearbox, Morris Gearbox, Metropolitan Gearbox, Austin Healey Change spd., Austin Gearbox

CEP OS P NA057 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B276

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.2 54.2 27.8 1.188976 2.133858 1.094488 M/F/R(Spec)
Fits Makes:
Morris Gearbox, M.G. Gearbox, Austin Healey Gearbox, Austin Gearbox

CEP OS P NA058 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B277, NA039, B222

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.8 38.18 9.9 0.779528 1.50315 0.389764 M/R(Std)
Fits Makes:
Perkins Aux Drive

CEP OS P NA059 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B281

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 9.5 1.122047 1.75315 0.374016 M/R(BD)
Fits Makes:
Russell Newbery , Jowett Gearbox, B.S.A mfc. Gearbox, Brockhouse P.T.O.

CEP OS P NA060 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B282

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.7 7.9 1.311024 1.877953 0.311024 M/R(B)
Fits Makes:
Leyland Front Axle

CEP OS P NA064 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B298

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
14.2 27.05 4.5 0.559055 1.064961 0.177165 M/R(B)
Fits Makes:
Norton M/c Timing Cover

CEP OS P NA065 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B302

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 40.16 9.5 0.748031 1.581102 0.374016 M/R(4B)
Fits Makes:
Lucas Generator, BSA M/c Crankshaft

CEP OS P NA067 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B306

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 44.53 4.7 1.185039 1.75315 0.185039 M/R(B)
Fits Makes:
Norton m/c. Crankshaft, A.JS m'c. Driving shaft

CEP OS P NA068 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B308

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35.1 6.3 0.874016 1.38189 0.248031 M/R(3B)
Fits Makes:
Villiers Crankcase, Trojan Steering, Rootes Fuel pump, Petter-Mclaren , Perkins Sev. applic., Oliver-Cletrac P.T.O., Massey-Ferguson Sev. applic. , Lincoln Steering, Karrier Fuel pump, Internal truck Aux. trans., Hillman Steering, G.M.grp. Steering, Ford truck Aux. trans., Faden Steering, Electrojan Steering, Dodge truck Aux. trans., Daimler Steering, Cov. Climax Hyd. pump, Conveyancer Torque conv,, Commer Fuel pump, Buick Steering, B.S.A. Sev. applic., B.M.C. Fan support, Blaw Knox Hyd. pump, Aveling Barford Hyd. pump, Austin Steering, Allis Chalmers Steering

CEP OS P NA069 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B309

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 47.11 6.3 1.311024 1.854724 0.248031 M/R(3B)
Fits Makes:
Triumph pass. Rear hub, Reliant Rear hub, Standard Rear hub, Morris Rear hub, outer

CEP OS P NA070 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B316

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 35 9.5 0.874016 1.377953 0.374016 M/L(Std)
Fits Makes:
Waukesha Water Pump, Vauxhall Steering, R/Hornsby Oil Pump, International Steering, Case Hyd Pump, Allis Chalmers PTO

CEP OS P NA071 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B318

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 11.1 1.122047 1.75315 0.437008 M/R(B)
Fits Makes:
Matchless m/c. Sev. applic., Fordson tractor Hyd. power, Electricar Rear hub, A.J.S. m/c. Sev. applic

CEP OS P NA075 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B342

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.53 9.5 1 1.75315 0.374016 M/R(B)
Fits Makes:
Villiers Red. gear, Seddon Gearbox, Petter-Mclaren Water pump, J.A.P , Excelsior rn/c. Crankshaft, Commer P.T.O

CEP OS P NA076 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B343

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 36.56 3.7 1.122047 1.43937 0.145669 M/R(B)
Fits Makes:
Velocette Bevel Drive

CEP OS P NA078 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B346

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
7.9 14.41 6.3 0.311024 0.567323 0.248031 M/R(B)
Fits Makes:
Wolseley Speedo., Standard Speedo., Riley Speedo., Panther rn/c. Rear susp, Morris Speedo., M.G. Speedo., Metropolitan Speedo., Austin Healey Speedo., Austin Speedo.

CEP OS P NA079 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B347

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.53 7.9 1.122047 1.75315 0.311024 M/R(B)
Fits Makes:
Triumph Mc Flywheel

CEP OS P NA080 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B348

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.82 9.5 1.122047 1.882677 0.374016 M/R(4B)
Fits Makes:
Wolseley Diff cover, Tasker trailer Axle, Seddon Sev. applic, Nuffield Governor, Morns Diff. cover, Leyland Water pump, Foden Wormshaft, David Brown Creeper gear, Austin pass. Diff cover, Austin pass. Shock abr, Albion Sev. applic, A.E.C Sev. applic

CEP OS P NA081 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B349, 5330998017012

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 41.35 9.5 1 1.627953 0.374016 M/R(B)
Fits Makes:
Villiers Crankshaft, Rotary Hoes Clutch, Panther m/c Crankshaft, Excelsior m/c Crankshaft, County Top idler

CEP OS P NA083 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B355

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 41.35 9.5 0.748031 1.627953 0.374016 M/R(B)
Fits Makes:
Excelsior Crankshaft

CEP OS P NA084 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B358

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 34.13 4 0.669291 1.343701 0.15748 M/R(B)
Fits Makes:
Simms Fuel Pump, CAV Fuel Pump

CEP OS P NA085 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B359

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 44.65 9.5 1.122047 1.757874 0.374016 M/R(4BDAT)
Fits Makes:
Sunbeam Crankshaft, James Mc Crankshaft, Fran.-Barnett Crankshaft

CEP OS P NA087 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B361

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 44.7 6.1 1 1.759843 0.240157 M/R(4B)
Fits Makes:
Thornycroft Air Comp, Leyland Air Comp, Commer Steering, C-Dewandre Air Comp, Ariel Mc Crankshaft, Albion Air Comp.

CEP OS P NA088 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B362

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
23.8 44.53 9.5 0.937008 1.75315 0.374016 M/R(Std)
Fits Makes:
AEC Water Pump

CEP OS P NA089 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B363, 2910998217555

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 31.95 6.3 0.748031 1.257874 0.248031 M/R(3B)
Fits Makes:
alternative use ref NA024t, Villiers Crankshaft, Standard Steering, Rambler Steering, Packard Steering, Nash Steering, JA P. , Internal tractor P T.O. shift, Hudson Steering, Hough Hyd. valve, Ford grp Steering, Cov Climax Water pump, Commer Steering, Chrysler grp Sev. applic., Chevrolet Transfer box, Case Steering, B.M.C Steering, Bolinder Water pump, Austin Shock abr., Allis Chalmers Control Valve, Albion Aux. drive

CEP OS P NA090 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B364

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 35.2 8 0.669291 1.385827 0.314961 M/R(4B)
Fits Makes:
Simca Steering, Renault Clutch, Lloyd Trans. gear, Lambretta Crankshaft, Fiat Steering

CEP OS P NA091 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B366

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.18 6.3 1 1.50315 0.248031 M/R(B)
Fits Makes:
Triumph pass. Gearbox, B.S.A. Sev. applic, Ariel m/c Camshaft

CEP OS P NA092 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B367

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.5 47.82 6.3 1.122047 1.882677 0.248031 M/R(3B)
Fits Makes:
Triumphm c Crankshaft, Cov Climax Sev. applic., B.S.A. M/C Crankshaft

CEP OS P NA095 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B372

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 47.7 11.1 1.374016 1.877953 0.437008 M/R(B/DAT)
Fits Makes:
Norton m/c Front fork
Product Image

CEP OS P NA098 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B382

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
13.5 36.9 4.5 0.531496 1.452756 0.177165 M/R(Spec)
Fits Makes:
Triumph m/c Magneto, Nonon m/c Magneto

CEP OS P NA099 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B384

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.2 41.27 9.5 0.874016 1.624803 0.374016 M/R(Std)
Fits Makes:
Russell Newbery , Nu/field tractor Fuel pump, Morns comm Fuel pump, Austtn comm. Fuel pump

CEP OS P NA100 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B388

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22 45.2 7 0.866142 1.779528 0.275591 M/R(4B)
Fits Makes:
Lancia Steering, Fiat Trans Front

CEP OS P NA102 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B396

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 47.7 11.1 1 1.877953 0.437008 M/R(Std)
Fits Makes:
Volvo -

CEP OS P NA103 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B397

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12 22.2 7 0.472441 0.874016 0.275591 M/R(4B)
Fits Makes:
N.S.U. Crankcase, Mercedes-Benz Trans. shift, Lanz, Ford-Taunus Trans. shift, Champion Gearbox

CEP OS P NA104 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Fordson Tr. Aux Drive, Ford Thames Aux Drive

Comparable to other manufacturer part numbers - B399

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.8 47.08 12.7 0.779528 1.853543 1/2 M/L/R(DA)
Fits Makes:
Fordson Tr. Aux Drive, Ford Thames Aux Drive

CEP OS P NA105 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B400

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 44.53 9.5 1.185039 1.75315 0.374016 M/R(B)
Fits Makes:
Matchless Front Fork, AJS Mcycle Front Fork

CEP OS P NA106 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B401

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 49.35 12.7 1.374016 1.942913 1/2 M/L/R(DLR)
Fits Makes:
Sunbeam pass. Overdrive, Singer Overdrive, Humber Gearbox, Hillman Overdrive, Commer Overdrive

CEP OS P NA107 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Lanz P.T.O., Lambretta Final drive, Goggomobil Trans. gear, Fiat comm. Air comp., Borgward Fuel pump, Bolinder Fan, Allgaier Sev. applic.

Comparable to other manufacturer part numbers - B402

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20 35.08 10 0.787402 1.381102 0.393701 M/R(4B)
Fits Makes:
Lanz P.T.O., Lambretta Final drive, Goggomobil Trans. gear, Fiat comm. Air comp., Borgward Fuel pump, Bolinder Fan, Allgaier Sev. applic.

CEP OS P NA110 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B407

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30 40.2 7 1.181102 1.582677 0.275591 M/R(4B)
Fits Makes:
Tempo Crankshaft, Skoda Gearbox, Mercedes-Benz Steering, Lloyd pass. Sev. applic., lsetta Rear axle, Goliath Diff., Goggomobil Rear hub, Champion Crankshaft, B.M.W. Sev. applic., Alfa-Romeo Trans. drive

CEP OS P NA111 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B409

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
17 28.2 7 0.669291 1.110236 0.275591 M/R(4B)
Fits Makes:
Villiers Drive shaft, Saurer Water pump, N.S.U. m/c. Sev. applic., Lloyd pass. Sev. applic., J.A.P. Crankcase, Fiat Sev. applic., Borgward Water pump

CEP OS P NA112 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B410

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 38.18 5.5 1.248031 1.50315 0.216535 M/R(BG)
Fits Makes:
Morris comm. Steering, Ford-Thames Steering, Dodge truck Water pump, Commer Steering, Bishop Steering, Austin comm. Steering

CEP OS P NA113 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B412

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.43 11.1 1.248031 1.985433 0.437008 M/R(Std)
Fits Makes:
Perkins Aux Drive

CEP OS P NA114 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B413, 5330998814606

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 47.7 7.9 1.248031 1.877953 0.311024 M/R(B)
Fits Makes:
Singer Front hub, Karrier Steering, Ford-Thames Steering, Dodge truck Steering, Commer Steering, Brockhouse Gearbox

CEP OS P NA115 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B414

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 35.18 7 0.984252 1.385039 0.275591 M/R(4B)
Fits Makes:
Simca Trans. front, Saurer Water pump, Saab Sev. applic., Mercedes-Benz Steering, Hanomag Blower, Fiat pass. Rear axle, Opel pass. Steering, Champion Front axle, Allgaier Power lift

CEP OS P NA117 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B420

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32 50.2 10 1.259843 1.976378 0.393701 M/R(4B)
Fits Makes:
Simca Trans Rear, Lanz Power Lift, BMW Rear Axle

CEP OS P NA118 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B421

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 40.2 8 0.984252 1.582677 0.314961 M/R(4B)
Fits Makes:
lsetta Drive shaft, B.M.W. Drive shaft

CEP OS P NA119 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B422

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25 37.2 7 0.984252 1.464567 0.275591 M/R(4B)
Fits Makes:
Opel Steering, N.S.U. Crankcase, lsetta Crankshaft, B.M.W. Sev. applic.

CEP OS P NA120 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B425

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 31.83 7.9 0.748031 1.25315 0.311024 M/L(Std)
Fits Makes:
Oliver-Cletrac Pulley, Caterpillar Trans Shift
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA120K - Rear Oil seal conversion

From £242.13 (£290.56 inc. VAT @ 20%)

Jaguar 3.8

Comparable to other manufacturer part numbers - C19687,

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
0 0 0

CEP OS P NA121 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B430

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 49.5554 14.2875 1 3/8 1.951 9/16 M/F/R(DFR)
Fits Makes:
Wolseley Gearbox, Singer Gearbox, Riley Gearbox, Morris Gearbox, M.G. Gearbox, Jaguar Gearbox, Hillman Gearbox, Dodge truck Gearbox, Commer Gearbox, Borg-Warner Gearbox, Austin Gearbox

CEP OS P NA123 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B437

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 30.2006 7.14375 19/32 1.189 9/32 M/R(4B)
Fits Makes:
Mercedes-Benz Water pump

CEP OS P NA124 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B438

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 30.2006 9.921875 19/32 1.189 25/64 M/R(4B)
Fits Makes:
J.A.P. Crankcase

CEP OS P NA126 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B442

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 32.1818 7.14375 7/8 1.267 9/32 M/R(4B)
Fits Makes:
Volvo Steering, Tempo Steering, N.S.U. Transmission, Borgward Steering, Allgaier Steering, Alfa-Romeo Water Pump, Adler Front Fork