Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA258 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C275

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.8 61.37 11.9 1.76378 2.416142 0.468504
Fits Makes:
alternative use ref. NA417, Pontiac Timing cover, G.M.C. Timing cover, Chevrolet Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA259 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C277

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 70.79 15.8 1.874016 2.787008 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA260 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C283

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 63.65 7.9 1.751969 2.505906 0.311024
Fits Makes:
Nuffield Tractor Timing cover, Morris comm. Timing cover, Foden Steering, Austin Comm. Timing cover, Albion Governor

CEP OS P NA261 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C288

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 63.6524 7.9375 1 7/8 2.506 5/16 M/L(Std)
Fits Makes:
Triumph pass. Rear hub, Riley Front hub, Morris Sev. applic., M.G. F. & R. hubs, Hands trailer Axle, Cov. Climax Timing cover, Commer Prop. shaft, Austin comm. Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA263 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C294

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 73.13 6.3 2.122047 2.879134 0.248031
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA264 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C295

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 50.8 6.3 1.185039 2 0.248031

CEP OS P NA265 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C301

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 66.7258 12.7 1 5/8 2.627 1/2 M/L(Std)
Fits Makes:
Towmotor Trans. rear, Oliver-Cletrac Sev. applic., Massey-Ferguson Sev. applic. , International Sev. applic., Hercules Red. gear, Cummins Sev. applic., Clark Drive axle, Caterpillar Track carr.

CEP OS P NA271 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C336

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.3875 73.1266 9.525 2 1/16 2.879 3/8 M/R(B)
Fits Makes:
Wolseley Front hub, Riley Front hub, Lagonda Crankshaft, B.M.C. Front hub, Austin Heale>{ Front hub, Austin Sev. applic., Aston Martin Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA275 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C358

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 71.53 7.9 1.937008 2.816142 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA280 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C404

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.25 9.5 1 1/2 2.253937 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA282 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C406

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 69.95 9.5 1.874016 2.753937 0.374016
Fits Makes:
Singer Rear hub, Reliant Rear hub, Dodge truck Gearbox front, Commer Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA283 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C414

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.4 72.14 12.7 1.748031 2.840157 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA286 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C425

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 68.38 12.7 2 2.692126 1/2
Fits Makes:
Triumph pass. Pinion, Scammell Front hub, Oliver-Cletrac Sprocket, Cockshutt Sev. applic., A.E.C. Pedal bkt.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA288 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C429

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 57.25 7.9 1.248031 2.253937 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA289 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C430

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 63.65 12.7 1.751969 2.505906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA290 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C431

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 52.48 7.9 1 1/2 2.066142 0.311024
Fits Makes:
Triumph Rear hub, Morris Front hub, Dodge truck Steering, Commer Steering, B.U.T. Brake cam, A.E.C. Brake cam
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA291 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C432

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 58.25 7.9 1 1/2 2.293307 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA293 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C449

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 72.09 7.9 2.122047 2.838189 0.311024
Fits Makes:
Wolseley Front hub, Morris Front hub, M.G. Front hub, Austin comm. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA294 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C450

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 63.65 9.5 1.685039 2.505906 0.374016
Fits Makes:
Wolseley Rear hub, Morris Rear hub, M.G. Rear hub, Austin pass. Rear hub, inner

CEP OS P NA295 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C451

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 63.6524 9.525 1 1/2 2.506 3/8 M/R(B)
Fits Makes:
Wolseley Sev. applic., Riley Pinion, Petter-Mclaren Sev. applic., Morris Pinion, M.G. Pinion, Metropolitan Pinion, Austin Healey Sev. applic., Austin Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA296 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C457

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 50.9 11.1 1.311024 2.003937 0.437008
Fits Makes:
Triumph pass. Rear axle, Standard Rear axle, Leyland R.A. tube ends
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA297 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C459

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 65.18 7.9 1.937008 2.566142 0.311024
Fits Makes:
Triumph pass. Rear hub, Standard Rear hub, Leyland Rear hub
Product Image

CEP OS P NA298 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C460

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 63.65 17.1 1.751969 2.505906 0.673228
Fits Makes:
Triumph pass. Timing cover, Standard Timing cover, Massey Ferguson Timing cover , Leyland Timing cover, Karrier Timing cover, Commer Timing cover, Austin comm. Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA299 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C461

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.9 12.7 1.248031 2.003937 1/2
Fits Makes:
Triumph pass. Gearbox, Standard Gearbox, Rotary Hoe Roadwheel, Leyland Gearbox front, David Brown Governor
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA300 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C462

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 63.65 12.7 1.685039 2.505906 1/2
Fits Makes:
Vauxhall Overdrive, Triumph pass. Gearbox, Sunbeam pass. Overdrive, Standard Gearbox, Rover Overdrive, Leyland Gearbox rear, Jensen Overdrive, Jaguar Overdrive, Humber Overdrive, Daimler comm. Steering, Bristol pass. Overdrive, Austin Healey Overdrive, Aston Martin Overdrive, Albion Rear axle

CEP OS P NA301 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C.463

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 54.0766 7.9375 1 3/8 2.129 5/16 M/R(B)
Fits Makes:
Wolseley F. & R. hubs, Riley F. & R. hubs, Morris F. & R. hubs, M.G. Front hub, Metropolitan Front hub, Austin Healey Front hub, Austin F.&R.hubs
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA302 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C470

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.7 63.58 9.5 1.366142 2.50315 0.374016

CEP OS P NA303 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C472

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.2516 9.525 1 1/2 2.254 3/8 M/R(B)
Fits Makes:
Triumph pass. Rear hub, Seddon Gearbox, Petter Mclaren , Morris Rear hub, Humber Gearbox, Hillman Gearbox, G.M.C. Sev. applic., Commer Gearbox, B.S.A. Sev. applic., Benford Gearbox, Armstrong Sidd. ·sev. applic. , A.E.C. Gearbox, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA304 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C473

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 62.1 12 1.574803 2.444882 0.472441
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA306 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C489

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 50.9 9.5 1.248031 2.003937 0.374016

CEP OS P NA308 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Front main oil seal land rover 2 1/4

Comparable to other manufacturer part numbers - C493

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2125 63.627 9.525 1 15/16 2.505 3/8 M/R(B)
Fits Makes:
Rover Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA309 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C494

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 69.95 12.7 1.874016 2.753937 1/2

CEP OS P NA311 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C500

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2125 69.9516 9.525 1 15/16 2.754 3/8 M/R(B)
Fits Makes:
Wolseley Rear fiub, Vulcan Sev applir, Riley Rear hub, Nuffleld tractor Sev. apphc.., Morris Rear hub, MG. F & R hubs, Dennis Gearbox, front, Austin Healey Rear hub, Austin Sev applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA313 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C502

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 58.06 12.7 1.374016 2.285827 1/2

CEP OS P NA314 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C505

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 56.261 28.575 1 3/8 2.215 1 1/8 M/F/L(Spec)
Fits Makes:
Wolseley Gearbox, Vauxhail Gearbox, M0rns Gearbox, M.G. Gearbox, Metropolitan Gearbox, Bedford Gearbox, Austin Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA317 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C511, 5330998016433

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 63.65 12.7 1.374016 2.505906 1/2

CEP OS P NA319 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C520

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 69.9516 9.525 1 1/2 2.754 3/8 M/R(B)
Fits Makes:
Wolseley Pinion, Riley Pinion, Austin (comm.) Pinion, Austin Pinion, Austin-Healey Pinion, Morris Hypoid Pinion

CEP OS P NA320 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C529, 5330998016419

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 50.9016 9.525 1 1/4 2.004 3/8 M/R(B)
Fits Makes:
Wolseley Gearbox, Villiers Sev. apphc, Inornvcroft Sev. appuc,, Seddon Gearbox, Petter Mclaren Reduction gear, t.istc- Clutch, Lane nester Flywheel, Darmler pass. Sev. appuc., Corr ner Fan drive, front, Aust n Healey Gearbox, Austin ,;ornrn Axle drive, Ausnn Gearbox f·ort, Albion F,P hrq, A.E: C Fan dnve
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA322 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C539

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 62.08 10 1.771654 2.444094 0.393701
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA324 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C548

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 68.33 12.7 1.374016 2.690157 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA327 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C568

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 62.11 12 1 1/2 2.445276 0.472441
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA328 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C571

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 66.78 15 1 1/2 2.629134 0.590551

CEP OS P NA329 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C572

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 60.4266 12.7 1 5/8 2.379 1/2 M/R/(B/DAT)
Fits Makes:
Triumph pass. Tin-::ng cover, Standard T1rr1ng cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA332 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C579

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 55.65 6.3 1.374016 2.190945 0.248031
Fits Makes:
Rover Fron· axle

CEP OS P NA333 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C581

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 60.4266 9.525 1 3/4 2.379 3/8 M/L(Std)
Fits Makes:
Ford Thames Front hub, Dennis Steering, Bristol cornrn Steering
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA336 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C593

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 65.18 12.7 1.937008 2.566142 1/2

CEP OS P NA337 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C594

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.2984 50.8 7.9375 0.996 2 5/16 M/R(BEC)
Fits Makes:
Ransome Sev applic, Alisa Craig
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA338 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C595

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8 65.18 7.9 1.685039 2.566142 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA339 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C597

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 60.43 7.9 1.625984 2.379134 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA340 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C600

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 60.42 5.5 1.374016 2.37874 0.216535

CEP OS P NA341 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C601

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 63.6524 7.9375 1 5/8 2.506 5/16 M/R(B)
Fits Makes:
Ford Thames Crankshaft, Ford pass. Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA342 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C604

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 66.78 12.7 1.751969 2.629134 1/2
Fits Makes:
Towmotor Trans shift, Oliver Cletrac. Clutch, Morns (Manne' Timing cover, Massey Ferguson Brake shaft , Mack Fan, Jaeger Brake drum, G_.M.C. truck Steering, Cov. Climax Trans, Clark Sev. applic, Case Sev. applic, Bedford Rear hub, Athey Sev applic.

CEP OS P NA343 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C605

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.0675 50.9016 6.35 1.2625 2.004 1/4 M/R(B)
Fits Makes:
Vauxhall Timing cover, Reliant Rear axle, Bedford Timing cover

CEP OS P NA345 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C609

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 54.0766 9.525 1 3/8 2.129 3/8 M/R(B)
Fits Makes:
Seddon Gearbox, Nuffleld rracror Gearbox, Fowler tractor P.T 0, Cov Climax Trans. sel,, Bristol comm Water pump, Austin Sev applic.., Ariel m/c Crankcase
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA346 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C610

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 63.63 9.5 1.751969 2.505118 0.374016
Fits Makes:
alternative use ref NA436t, Wolseley Rear hub, Vickers tractor Fan spindle, Seddon Gearbox, Rover Front axle, Riley Rear hub, Perkins Timing cover, Nuffield trac tor Sev applic, Morns Rear hub, MG. Rear hub, Metropolitan Rear hub, Humber Sev applic, Guy Clutch, Ford Thames Timing cover, Faden Sev applic, Dodge truck Sev applic, Commer Rear hub, Austin Healey Rear hub, Austin Sev applic, Arrnst-onq Side Gearbox, AEC Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA347 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C613

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.7 52.48 12.7 1.248031 2.066142 1/2

CEP OS P NA348 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C615

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.9516 9.525 2 2.754 3/8 M/R(B)
Fits Makes:
alternative use ref NA386, Perkins timing cover

CEP OS P NA349 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C616

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46.0375 63.6016 5.55625 1 13/16 2.504 7/32 M/L(G)
Fits Makes:
Vauxhall Front hub, Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA350 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C617

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 73.13 9.5 2.122047 2.879134 0.374016
Fits Makes:
atternanve use ref. NA459t, Wolseley Rear hub, Riley Rear hub, Morns Sev. applic., Austin Healey Rear hub, Austin Sev. applic., A.E.C. P r.o.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA351 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C618

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 54.08 12.7 1.374016 2.129134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA352 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C622

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 74.7 7.9 1.874016 2.940945 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA353 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C624

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 55.65 12.7 1.311024 2.190945 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA354 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C628

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 68.35 9.5 2 2.690945 0.374016
Fits Makes:
Triumph Sev applic, Lanchester Front hub, Daimler pass Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA355 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C637

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 62.1 10 1.574803 2.444882 0.393701

CEP OS P NA356 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C638

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34 52 6.5 1.338583 2.047244 0.255906 M/L(G)
Fits Makes:
Renault Rear hub, Zundapp Rear axle, Simca Sev. applic, Saab Rear hub, Renault Rear hub, Mercedes- Benz Sev. applic., Hanomag P.T.O, Fiat Rear hub, Borgward Rear axle, Allgaier Drive shaft

CEP OS P NA358 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C644

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5125 63.6524 12.7 1 7/16 2.506 1/2 M/R(Std)
Fits Makes:
Petter- Mclaren Speed gear, Leyland Dynamo
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA359 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C645

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 62.1 12 1.574803 2.444882 0.472441
Fits Makes:
Volkswagen Front hub, Scania Vabis Clutch, Saurer Air braxe, Porsche Front fiub, Opel Pinion, Mercedes Benz Trans, Magirus Clutch, Fiat tractor Sev applic., Bristol tractor Bell hsg, Borgward Rear dxle, Allgaier Sev applic

CEP OS P NA360 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C649

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.9516 9.525 2 2.754 3/8 M/L(Std)
Fits Makes:
Lea Francis Rear hub, Jaguar Rear hub, Humber Front hub, E.N.V Rear hub, Dormar Fuel pump, Cov. Victor Crankshaft, Beardmore Rear hub, Alvis Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA361 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C653

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 73.13 12.7 1.874016 2.879134 1/2

CEP OS P NA362 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C658

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 69.9516 12.7 1 3/4 2.754 1/2 M/R(Std)
Fits Makes:
Scammell Clutch, Rotary Hoes Sev. Applic., Fowler tractor Track Unit, Bristcl pass. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA363 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C665

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 60.42 12.7 1.751969 2.37874 1/2
Fits Makes:
Russell-Newbery , Petter-Mclaren Flywheel, Ford military Front axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA365 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C667

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6 63.65 7.9 1.559055 2.505906 0.311024
Fits Makes:
Wales&Edward Front hub, Triumph m/c Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA366 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C668

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 63.65 12.7 1 1/2 2.505906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA368 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C671

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 60.1 10 1.771654 2.366142 0.393701
Fits Makes:
Opel pass. timing cover, Mercedes Benz Front hub, Hanomag Clutch, Borgward Rear hub, Austin comm. Sev applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA369 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C672

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 63.65 12.7 1.874016 2.505906 1/2

CEP OS P NA370 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C673

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 63.6524 7.9375 1 1/2 2.506 5/16 M/L(Std)
Fits Makes:
Lagonda Rear hub, Green Clutch, Ford Thames Rear hub, Ford pass Rear hub

CEP OS P NA371 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C674

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 54.0766 7.9375 1 1/4 2.129 5/16 M/L(Std)
Fits Makes:
alternative use ref NA481 , Ford-Thames Front hub, Ford pass. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA372 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C675

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5 55.65 12.7 1.437008 2.190945 1/2
Fits Makes:
Ford-Thames Pinion, Ford pass. Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA373 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C680

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6 60.42 5.5 1.559055 2.37874 0.216535
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA374 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C681, 5330998166422

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.95 12.7 2 2.753937 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA376 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C686

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46 70 12.7 1.811024 2.755906 1/2
Fits Makes:
Timken axle Pinion, Albion Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA378 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C711

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50 72.08 11.9 1.968504 2.837795 0.468504
Fits Makes:
Panhard Rear hub, Mercedes Benz Rear axle, Hanomag Sev. applic., Fiat tractor Starter, Borgward Front axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA380 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C716

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 62.08 10 1.771654 2.444094 0.393701
Fits Makes:
Volkswagen Rear hub, Simca , Porsche Rear hub, Peugeot pass. Rear hub, Opel Pinion, Mercedes-Benz Sev. applic., M.A.N. Steering, Magirus Steering, Fiat Timing cover, Citroen F. & R. axle, Borgward Sev. applic., Austin Rear hub, Allgaier Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA383 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C721

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 73.12 9.5 1.874016 2.87874 0.374016
Fits Makes:
Ford pass. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA385 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C734

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1 50.9 9.5 1.185039 2.003937 0.374016
Fits Makes:
Panther m/c. F. & R. hubs, A.E.C. Water pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA386 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C735, 5330998016242

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 70.1 9.5 2 2.759843 0.374016
Fits Makes:
alternative use ref. NA348, Seddon Gearbox, Perkins Sev. applic, Leyland Pinion, Horndraulic Hyd. ram, E.R.F. Tipper ram, Dodge truck Pinion, Dennis Pinion, David Brown Trans., Conveyancer Torque conv., Cadillac Timing cover, B.M.C. Pinion, Austin comm. Pinion, Atkinson Inter. shaft, Albion Trans., A.E.C. Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA387 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C736

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 66.92 9.5 1.874016 2.634646 0.374016
Fits Makes:
Humber Front hub, Dodge truck Front hub, Commer Front hub, A.E.C Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA388 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C737

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 55.65 9.5 1.374016 2.190945 0.374016
Fits Makes:
Standard Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA390 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C740

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 65.33 7.9 1.874016 2.572047 0.311024
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA391 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C741

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46 66.92 9.5 1.811024 2.634646 0.374016
Product Image

CEP OS P NA393 - Oil Seal

From £37.39 (£44.87 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C743

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 115.88 14.2 2 4.562205 0.559055
Fits Makes:
Willys Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA395 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C745

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 52.2 10 1.377953 2.055118 0.393701
Fits Makes:
Simca Timing cover, Renault Sev. applic., Panhard Front hub, Mercedes-Benz Trans., M.A.N. Output shaft, Lancia Swivel cplg., Hanomag Sev. applic., Ford-Taunus Sev. applic., Fiat pass. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA396 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C747

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33 55.15 15 1.299213 2.17126 0.590551
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA398 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C750, 5330998045121

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 65.25 10 1.771654 2.568898 0.393701
Fits Makes:
Renault Transmission, Mercedes-Benz Front hub, Jensen Gearbox, Fiat Timing cover, Borgward Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA399 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C751

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 51 6.3 1 1/2 2.007874 0.248031
Fits Makes:
Matchless m/c. Gearbox, Ariel m/c. Gearbox, A.J.S. m/c. Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA400 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C752

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 60.2 10 1.574803 2.370079 0.393701
Fits Makes:
Mercedes-Benz Trans., Fiat Timing cover, Bussing P.T.O., B.M.W. Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA401 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C755

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 58.25 10 1.377953 2.293307 0.393701
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA402 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C756

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33 56.21 12 1.299213 2.212992 0.472441
Fits Makes:
Opel Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA404 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C758

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 60.48 19 1 1/2 2.381102 0.748031
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA405 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C759

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.7 62.12 19.8 1.562992 2.445669 0.779528