Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA668 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D397

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 79.48 9.5 2.374016 3.129134 0.374016
Fits Makes:
Wolseley Rear axle, Thornycroft Gearbox, Singer Gearbox, Perkins P.T.O, Leyland Pinion, Lewin Brush, Humber Rear hub, Hillman Gearbox, E.R F. Tipper, Dodge truck Sev. applic., Austin comm. Rear hub, Atkinson Axle shaft, Albion Pinion, A.EC Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA670 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D401

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.03 12.7 2 1/2 3.505118 1/2
Fits Makes:
Volvo Crar-kshaft, Fordson tractor Crankshaft, Ford-Thames Crankshaft, Dodge truck Gearbox rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA672 - Oil Seal

From £4.99 (£5.99 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D403

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 79.48 12.7 1.874016 3.129134 1/2
Fits Makes:
Fordson tractor Trans.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA673 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D404

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 85.75 17.4 2.248031 3.375984 0.685039
Fits Makes:
lnternat. truck Transfer box, Fordson tractor Stg brake
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA674 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D405

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
58.7 90.09 12.7 2.311024 3.54685 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA675 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D415

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 92.18 12.7 2.748031 3.629134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA676 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D420

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 75.45 12.7 2 2.970472 1/2
Fits Makes:
Petter Mclaren Flywheel, Perkins Red. gear, Ingersoll Rand Crankshaft, Conveyancer Pinion, Bristol tractor Sev applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA678 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D422

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5 85.75 12.7 2.185039 3.375984 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA679 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D426, D487, 5330998017126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 76.3 9.5 2.248031 3.003937 0.374016
Fits Makes:
Vickers tractor Clutch, Rootes Cyl. front end, Karrier Timing cover, Humber Timing cover, Commer Timing cover, Beadle Timing cover

CEP OS P NA681 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D431

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 98.552 12.7 2 3/4 3.88 1/2 M/R(Std)
Fits Makes:
Morris Comm Rear hub, Leyland Timing cover, Brad-Sanders Crankshaft, Austin comm. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA682 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D436

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 81.13 15.8 2.248031 3.194094 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA684 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D439

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 85.85 12.7 2.374016 3.379921 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA685 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D440

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.32 12.7 2 3.004724 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA686 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D444, 5330998014944

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 85.82 9.5 2.622047 3.37874 0.374016
Fits Makes:
Seddon Gearbox, Petter-Mclaren , Leyland Gearbox, E.R.F Tipper, Austin comm. Front axle, Aston Martin Rear hub, Albion Gearbox, A.E.C Sev applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA688 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D450

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 82.65 9.5 2 1/2 3.253937 0.374016
Product Image

CEP OS P NA691 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D471

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.94375 85.8266 12.7 2 9/32 3.379 1/2 M/F(Spec.)
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA695 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D481

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 95.38 12.7 2.622047 3.755118 1/2
Fits Makes:
White Front rub, Minne-Moline Crankshaft, Hands trailer Axle, Dyson trailer Axle, Carrimore Axle, Aveling Barford Crankstaft, Ailsa Craig Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA696 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D482

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 76.3 12.7 2.122047 3.003937 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA697 - Oil Seal

From £21.19 (£25.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D483

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 92.2 12.7 2.248031 3.629921 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA699 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D487

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 76.45 9.5 2.248031 3.009843 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA700 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D488

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 79.48 15.8 2.248031 3.129134 0.622047
Fits Makes:
Commer Pinion, Beadle Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA702 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D491

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
64 80.25 8 2.519685 3.159449 0.314961
Fits Makes:
Jaguar Trans .rear, Fiat pass. Crankshaft, Daimler pass Gearbox, rear
Product Image

CEP OS P NA703 - Oil Seal

From £29.90 (£35.88 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D493, 204E-4676,

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.9 76.23 16.6 1.688976 3.001181 0.653543
Fits Makes:
Ford-Thames Pinion, Ford pass. Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA704 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D494

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.4 76.23 9.5 2.062992 3.001181 0.374016
Fits Makes:
Ford Tharr-es Rear hub, Ford pass Rear hub

CEP OS P NA708 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D504

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.675 89.027 12.7 2 5/8 3.505 1/2 M/L/R(DC)
Fits Makes:
alternative use ref. NA748, Fordson Crankshaft, front

CEP OS P NA710 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D506, 5330998485902

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 89.154 9.525 2 3/4 3.51 3/8 M/R(3B)
Fits Makes:
Vulcan Sev applic,, Vickers tractor Trans., Tilling Stevens Sev apphc, Nuffield tractor Sev applic, Leyland Gearbox, Guy Gearbox, Fowler tractor Clutch unit, Denris Front hub, Bristol Sev. applic, Bolinder Timing cover, Austin pass. Front hub, Austin Newage Timing cover, Albion Gearbox, A E.C Crankshaft

CEP OS P NA711 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D507

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 92.1512 14.2875 2 3/4 3.628 9/16 M/L/L(DC)
Fits Makes:
Massey Ferguson Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA712 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D510

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
80 100.25 10 3.149606 3.94685 0.393701

CEP OS P NA713 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D514

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 95.504 9.525 3 8.8817841970013E-16/2 3.76 3/8 M/R(4B)
Fits Makes:
Nuffield tractor Final dr ve, Guy Prop. shaft, Fowler tractor Belt drive, Foden Worm shaft, E.R F Tipper, Bristol comm. Int shaft, A E.C. Bevel ptruor-
Product Image

CEP OS P NA714 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D515

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 79.75 12.7 1.751969 3.139764 1/2
Product Image

CEP OS P NA715 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D517

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5 81.13 17.4 2.185039 3.194094 0.685039
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA716 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D521

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 89.03 12.7 2.622047 3.505118 1/2
Fits Makes:
Massey Ferguson Rear axle , Leyland Sev applic
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA717 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D523

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.02 11.1 2 1/2 3.504724 0.437008
Fits Makes:
Volvo Sev applic, Thornycroft Pinion, Leyland Timing cover, Atkinson Pinion, Albion Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA718 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D524

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.1 82.7 12.7 2.248031 3.255906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA720 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D533

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 76.3016 9.525 2 3/8 3.004 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA723 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D552

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
59.928125 75.2348 7.9375 2 23/64 2.962 5/16
Fits Makes:
Lanz Clutch, Borgward Front axle, Austin pass. Rear hub, outer, Allgaier
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA725 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Mercedes Benz Rear axle, Lanz Crankshaft, Lancia Crankshaft, Goliath Crankshaft, Fiat Gearbox, Farymann Crankshaft, Alfa Romeo Diff

Comparable to other manufacturer part numbers - D556

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 90.2462 9.921875 2 3/4 3.553 25/64
Fits Makes:
Mercedes Benz Rear axle, Lanz Crankshaft, Lancia Crankshaft, Goliath Crankshaft, Fiat Gearbox, Farymann Crankshaft, Alfa Romeo Diff

CEP OS P NA726 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D558

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
75 95 12 2.952756 3.740157 0.472441 M/R(4B)
Fits Makes:
Simca Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA727 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D559

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
80.16875 100.2538 11.90625 3 5/32 3.947 15/32
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA728 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D561

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 82.6516 12.7 2 1/2 3.254 1/2
Fits Makes:
Perkins Timing cover, Massey-Ferguson Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA730 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D565

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 76.2254 14.2875 1 3/8 3.001 9/16

CEP OS P NA731 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D566

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.454 9.525 2 3.01 3/8 M/R(4B)
Fits Makes:
Petter· Mclaren Main brg
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA732 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D567

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 89.027 15.875 2 3/4 3.505 5/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA733 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D571

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
68.2625 89.027 12.7 2 11/16 3.505 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA734 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D572

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 82.804 9.525 2 1/2 3.26 3/8
Fits Makes:
Seddon Gearbox, rear, Perkins Timing cover, Nuffield tractor Transf. gear, Lewir De-loader, Kamer Gearbox, rear, Commer Gearbox, Bristol comm. Pinion, Avellng Barford Sev. applic, A.E.C Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA736 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D574

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 76.3016 12.7 2 1/4 3.004 1/2
Fits Makes:
Perkins Timing cover, Massey Ferguson Timmq cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA737 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D576

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.3875 76.2254 19.446875 2 1/16 3.001 49/64
Fits Makes:
Ford Thames Rear hub, Ford pass. Rear hub

CEP OS P NA738 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D577

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8625 77.8764 12.7 1 11/16 3.066 1/2 M/L(Std)
Fits Makes:
Ford-Thames Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA739 - Oil Seal

From £21.19 (£25.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D578

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 76.2254 14.2875 1 1/4 3.001 9/16
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA740 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D579

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.103125 92.1004 9.525 2 31/64 3.626 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA741 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D580

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 79.4766 13.890625 2 3/8 3.129 35/64 M/R(Spec.)
Fits Makes:
Perkins Timmg cover, Massev-Ferquson Timing cover , Kamer Timing cover, Ford Timing cover, Commer Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA742 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D582

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 82.6516 12.7 2 1/2 3.254 1/2
Fits Makes:
Ford Thames Gearbox, Bedford Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA745 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D586

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
61.9125 82.6516 5.55625 2 7/16 3.254 7/32
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA747 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D588

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.027 17.4625 2 1/2 3.505 11/16
Fits Makes:
Fordson tractor Stg brake, Crossley Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA748 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D589

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.675 89.154 12.7 2 5/8 3.51 1/2
Fits Makes:
alternative use ref NA708, Fordson tractor Crankshaft, Ford Thames Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA749 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D590

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 76.2254 5.55625 2 1/4 3.001 7/32
Fits Makes:
Jaguar Rear hub

CEP OS P NA751 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D592

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
70 85 8 2.755906 3.346457 0.314961 M/V(4B)
Fits Makes:
Simca Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA752 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D593

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 98.679 10.31875 3 8.8817841970013E-16/2 3.885 13/32
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA753 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D594

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 84.1375 9.525 2 1/4 3 5/16 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA754 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D596

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 83.3374 9.525 2 1/2 3.281 3/8

CEP OS P NA755 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D598

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.675 95.377 15.08125 2 5/8 3.755 19/32 M/F/R(DFR)
Fits Makes:
Massey- F-ergusor Rear axle, outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA758 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D626

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.675 89.027 13.49375 2 5/8 3.505 17/32
Fits Makes:
Ford Crankshaft, front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA759 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D627

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.2254 12.7 2 3.001 1/2
Fits Makes:
Triumph Timing cover, Standard Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA760 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D628

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
57.15 84.201 7.9375 2 1/4 3.315 5/16
Fits Makes:
Ford Front hub

CEP OS P NA761 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D629

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60 80 10 2.362205 3.149606 0.393701 M/R(4B)
Fits Makes:
Volkswagen Crankshaft, Porsche Sev. applic, Mercedes Benz Rear axle, M.A.N F.&R.axle, Lanz Pulley, Honomag Sev. applic, Deutz Crankshaft, Austin comm. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA762 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D630

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 85.725 12.7 2 3/8 3 3/8 1/2
Fits Makes:
Massey-Ferguson Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA763 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D631

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.027 12.7 2 1/2 3.505 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA764 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D633

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 82.55 11.90625 2 3/8 3 1/4 15/32
Fits Makes:
Ford Tractor Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA765 - Oil Seal

From £8.73 (£10.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D634

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 85.852 4.7625 2 7/8 3.38 3/16
Fits Makes:
Rover Rear hub, Jaguar Rear hub outer, Daimler Rear hub outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA768 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D637

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 100.1268 13.096875 2 3/4 3.942 33/64
Fits Makes:
Ford Truck Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA769 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D638

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 112.7 9.525 3 1/2 4.437008 3/8
Fits Makes:
Leyland Rear hub, Foden Front hub, B.M C. Rear hub

CEP OS P NA771 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D640

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9875 76.835 12.7 1 1/16 3.025 1/2 M/PY(4B)
Fits Makes:
Ford Rear axle ptruor
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA772 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D641

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.0728 77.597 11.1125 1.932 3.055 7/16 M/R(Spec.)
Fits Makes:
Ford Rear hub, mner
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA773 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Nuffield trac tor Timing cover, B.M C. Timing cover

Comparable to other manufacturer part numbers - D642

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
55.5625 73.1774 12.7 2 3/16 2.881 1/2
Fits Makes:
Nuffield trac tor Timing cover, B.M C. Timing cover

CEP OS P NA774 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Triumph Crankshaft rear

Comparable to other manufacturer part numbers - D643

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 92.202 9.525 2 7/8 3.63 3/8 M/Si(4B)L/H
Fits Makes:
Triumph Crankshaft rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA775 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D644

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.99375 99.9998 11.509375 3 1/32 3.937 29/64 M/R(Spec.)
Fits Makes:
Opel. Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA779 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D648

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 76.3016 11.1125 2 3/8 3.004 7/16
Fits Makes:
Saab Crankshaft rear, Ford Taunus Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA780 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D649

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.06875 75.0062 17.4625 1 21/32 2.953 11/16
Fits Makes:
Ford (German) Rear axle pinion, Ford transit Rear axle pinion

CEP OS P NA781 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D650

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
58.7375 85.3186 7.9375 2 5/16 3.359 5/16 M/R(B)
Fits Makes:
alternative use ref NA652, Rover Landrover Rear hub , Rover Landrover Frort hub

CEP OS P NA782 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D652

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.9 82 10 2.122047 3.228346 0.393701 M/R(4B)
Fits Makes:
Opel Crankshaft rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA783 - Oil Seal

From £7.47 (£8.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D653

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44 78 10.5 1.732283 3.070866 0.413386
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA784 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D654

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
70 90 10 2.755906 3.543307 0.393701
Fits Makes:
Volkswagen Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA785 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D655

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.7 73.17 15.8 1.562992 2.880709 0.622047
Fits Makes:
Wolseley Timing cover, Austin Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA786 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D656, 5330998017205

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 89.02 19 2 1/2 3.504724 0.748031
Fits Makes:
Leyland Timing cover, Bedford Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA788 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D658

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
70 98.42 19 2.755906 3.874803 0.748031
Fits Makes:
Leyland Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA789 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D659

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 92.2 11.9 2.622047 3.629921 0.468504
Fits Makes:
Ford Thames Pinion, Commer Pinion, B M.C Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA790 - Oil Seal

From £35.44 (£42.53 inc. VAT @ 20%)

Rover P6 2000 / 2200 front crank seal
use in EF550 / EF 550 conversion kit

Comparable to other manufacturer part numbers - D660, EF550, EF 550,

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.6 89.95 12.7 1.874016 3.541339 1/2
Fits Makes:
Rover Crankshatt, front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA791 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D661

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 79.48 10.4 2.374016 3.129134 0.409449
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA792 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D662

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 98.67 11.9 3 8.8817841970013E-16/2 3.884646 0.468504
Fits Makes:
Vauxhall Crankshaft, rear, Bedford Crankshaft, rear

CEP OS P NA793 - Oil Seal

From £12.74 (£15.29 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D663

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.375 95.4024 9.525 3 1/8 3.756 3/8 M/Si(4B)L/H
Fits Makes:
Ford Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA794 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D664

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 76.5 20.63 1 3/8 3.011811 0.812205
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA795 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D665

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
71.43 92.2 9.5 2.812205 3.629921 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA797 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D667

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
68 89.15 12.7 2.677165 3.509843 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA798 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E104

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 101.8 12.7 3 8.8817841970013E-16/2 4.007874 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA799 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E110

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 103.3 12.7 2.748031 4.066929 1/2

CEP OS P NA800 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E117

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 114.4524 12.7 3 1/2 4.506 1/2 M/L(Std)
Fits Makes:
Jaguar Clutch, Hyster Sev. applic., Hands trailer Axle, Dennis gearbox, Cov. Climax Wheel hubs, Austin comm. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA802 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E119

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 119.15 12.7 3.374016 4.690945 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA803 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E121

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
82.5 120.73 12.7 3.248031 4.75315 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA804 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E124

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
84.1 111.25 12.7 3.311024 4.379921 1/2
Fits Makes:
Muirhill Trans. gear, Fordson tractor Trans. gear
Product Image

CEP OS P NA805 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E127

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.4 116 30.2 3.125984 4.566929 1.188976