Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA407 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C765

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 52.2 7 1.574803 2.055118 0.275591
Fits Makes:
Sunbeam pass. Gearbox, Singer Sev. applic., N.S.U. Crankcase, Mercedes Benz Front hub, Magirus Blower, Lloyd pass. Rear axle, Humber Gearbox, Hillman Sev. applic., Deutz Blower, Commer Sev. applic., Champion Crankshaft, Bussing Fan, B.S.A. m/c. Crankcase
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA409 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C767

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 63.65 7.1 1.937008 2.505906 0.279528
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA411 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C771

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38 54.2 10 1.496063 2.133858 0.393701
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA412 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C773

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 58.2 12 1.574803 2.291339 0.472441
Fits Makes:
Fiat pass. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA414 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C775

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 50.9 6.3 1 2.003937 0.248031
Fits Makes:
Atkinson Spreader
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA416 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C777

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 63.8 9.5 1.937008 2.511811 0.374016
Fits Makes:
Wolseley Timing cover, Riley Timing cover, Rambler Timing cover, Nash Timing cover, Morris Timing cover, Leyland Timing cover, Hudson Timing cover, Austin Healey Timing cover, Austin Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA418 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C780

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.7 60.42 9.5 1.562992 2.37874 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA419 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C781

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5 54.07 12.7 1.437008 2.12874 1/2
Fits Makes:
Morris comm. Gearbox, Dennis Gearbox, front, B.M.C. comm Gearbox, Austin comm Gearbox

CEP OS P NA421 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C786

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 73.1266 12.7 2 1/8 2.879 1/2 M/R(Std)
Fits Makes:
Studebaker Trans. front, Standard Trans. front, Rover Trans. front, Massey-Ferguson Rear axle , Jaguar Trans. front, lnternat. tractor Trans. front, Humber Trans. front, Hudson Trans. front, Ford pass. Trans. front, Chrysler grp. Trans. front, B.M.C. grp. Trans. front, Aston Martin Trans. front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA422 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C788

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.93 12.7 2 2.75315 1/2
Fits Makes:
Jaguar Timing cover, Daimler Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA423 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C794

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50 68.1 14 1.968504 2.681102 0.551181
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA424 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C795

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 50.9 5.5 1 1/2 2.003937 0.216535
Fits Makes:
Nuffield Steering, Morris comm. Steering, Hercules Governor, Commer Steering, Austin comm. Steering
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA425 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C796

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 70.1 9.5 2 2.759843 0.374016
Fits Makes:
Sunbeam pass. Rear hub, Singer Rear hub, Humber Rear hub, Hillman Rear hub, Dodge truck Rear hub, Commer Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA426 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C797

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46 60.4 9.5 1.811024 2.377953 0.374016
Fits Makes:
alternative use ref. NA480, Sunbeam pass. Front hub, Singer Front hub, Hillman Front hub, Commer Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA427 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C798

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32 52.1 12 1.259843 2.051181 0.472441
Fits Makes:
Simca Rear axle, Ford Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA428 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C800

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 70.1 12.7 2 2.759843 1/2
Fits Makes:
Oliver-Cletrac Hyd. control, Massey Ferguson Pulley
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA429 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C801

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 57.35 9.5 1.751969 2.257874 0.374016
Fits Makes:
Massey-Ferguson Trans. case
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA430 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C802

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.6 57.35 9.5 1.125984 2.257874 0.374016
Fits Makes:
Massey-Ferguson Trans. case
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA431 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C803

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44 59.44 6.3 1.732283 2.340157 0.248031
Product Image

CEP OS P NA432 - Oil Seal

From £23.67 (£28.40 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C804, 5330998814928

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 68.35 19.4 1.751969 2.690945 0.76378
Fits Makes:
Massey-Ferguson P.T.O.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA433 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C805

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 54.08 4.7 1.751969 2.129134 0.185039
Fits Makes:
Rootes Front hub, Massey Ferguson Pulley
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA435 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C811

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52 72.25 10 2.047244 2.844488 0.393701
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA436 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C813

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 63.65 9.5 1.751969 2.505906 0.374016
Fits Makes:
Trojan Front hub, Timken Sev. applic., Spicer Trans., Salisbury Rear axle, G.M.C. Trans. front, B.M.C Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA438 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C818

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5 57.4 9.5 1.437008 2.259843 0.374016
Fits Makes:
Leyland Sev. applic, Commer Fan drive, rear, Albion Input shaft, A.E.C. Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA440 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C820

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 60.43 12.7 1 1/2 2.379134 1/2
Fits Makes:
alternative use ref. NA217, Massey-Ferguson Sev. applic. , Leyland Clutch, G.M.C Sev. applic., Atkinson Diff.

CEP OS P NA441 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C821

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
26.9875 55.6514 11.1125 1 1/16 2.191 7/16 M/R(Std)
Fits Makes:
Sunbeam pass. Rear axle, Leyland Crankshaft, Hillman Rear axle, Commer Rear axle, Bedford Crankshaft, Albion Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA442 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C822

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 73.27 12.7 1.625984 2.884646 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA443 - Oil seal

From £14.96 (£17.95 inc. VAT @ 20%)

also NA512

Comparable to other manufacturer part numbers - C824

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2 65.18 9.5 1.937008 2.566142 0.374016
Fits Makes:
alternative - use ref. NA512 , Bedford Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA445 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C831

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 52.197 9.921875 1 3/16 2.055 25/64
Fits Makes:
Opel Sev. applic., Alfa-Romeo Rear axle
Product Image

CEP OS P NA446 - Oil Seal

From £29.90 (£35.88 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C833

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.84375 76.1492 11.1125 25/32 2.998 7/16
Fits Makes:
Perkins Fuel pump

CEP OS P NA447 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C834

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48 62 8 1.889764 2.440945 0.314961 M/R(4B)
Fits Makes:
Volkswagen Front hub, Skoda Rear hub, M.A.N. Output shaft, Fiat Sev. applic., Alfa-Romeo Sev. applic.

CEP OS P NA448 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C835

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48 62 8 1.889764 2.440945 0.314961 M/R(4B)
Fits Makes:
Wolseley Front susp., Skoda Rear hub, Scania Vabis Sev. applic., Riley F.&R.hub, Morris Sev. applic., Mercedes-Benz Rear axle, Lloyd pass. Sev. applic., Austin Sev. applic., Allgaier Crankshaft, Alfa Romeo Rear susp.

CEP OS P NA449 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C852

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 68.3514 12.7 1 1/2 2.691 1/2 M/L(Std)
Fits Makes:
Triumph pass. Pinion, Plymouth Rear axle, Imperial Rear axle, Dodge pass. Rear axle, De Soto Rear axle, Chrysler Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA451 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C862

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 56.1848 11.90625 1 3/8 2.212 15/32

CEP OS P NA452 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C863

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 62 12 1.377953 2.440945 0.472441 M/R(4B)
Fits Makes:
Peugeot Gearbox, Hanomag Pulley, Fiat Pinion, Allgaier Sev. applic.

CEP OS P NA453 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C864

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 50.927 7.9375 1 1/2 2.005 5/16 M/R(4B)
Fits Makes:
Simca F. & R. hubs, Renault Rear axle, Mercedes Benz Steering, Lancia Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA455 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C867

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48.021875 65.2526 11.90625 1 57/64 2.569 15/32

CEP OS P NA456 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C868

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.9516 12.7 2 2.754 1/2 M/L/R(DLR)
Fits Makes:
Perkins Crankshaft, Massey-Ferguson Crankshaft , Fordson tractor Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA457 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C869

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.053125 65.2526 9.921875 1 47/64 2.569 25/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA458 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C870

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 58.2422 11.90625 1 3/8 2.293 15/32

CEP OS P NA459 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C872

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 73.279 9.525 2 1/8 2.885 3/8 M/R(4B)
Fits Makes:
alternative use ref. NA350t, Rover Torque conv., Humber Timing cover, Guy Sev. applic., Fordson tractor Rear axle, Dodge truck Timing cover, David Brown Timing cover, Commer Timing cover, Coles crane Gearbox, A.E.C. P.T.O. rear

CEP OS P NA461 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C875

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 62 12 1.771654 2.440945 0.472441 M/R(4B)
Fits Makes:
Scania Vabis Steering, Peugeot Rearhub, Opel Trans., Hanomag Sev. applic., Bussing Gearbox, Allgaier Sev. applic.

CEP OS P NA462 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C877

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38 62 10 1.496063 2.440945 0.393701 M/R(4B)
Fits Makes:
Peugeot Front hub, Goliath Sev. applic., Goggomobil Rear hub

CEP OS P NA463 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C878

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 50.9016 9.525 1 3/8 2.004 3/8 M/R(B)
Fits Makes:
Triumph pass. Gearbox, Standard Gearbox

CEP OS P NA465 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C881

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 52 9 1.377953 2.047244 0.354331 M/R(Std)
Fits Makes:
Fiat Front hub

CEP OS P NA466 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C882

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8625 68.2625 12.7 1 11/16 2 11/16 1/2 M/R(BEC)
Fits Makes:
Fordson tractor Front hub

CEP OS P NA467 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C883

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8625 55.6514 4.7625 1 11/16 2.191 3/16 M/R(B)
Fits Makes:
Norton m/c. Gearbox, Matchless m/c. Gearbox, A.J.S. m/c. Gearbox

CEP OS P NA468 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C886

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 50.9016 7.9375 1 3/8 2.004 5/16 M/R(B)
Fits Makes:
Volvo Gearbox, Goodenough Water pump, Ford Gearbox

CEP OS P NA469 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C888

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 60.579 9.525 1 5/8 2.385 3/8 M/R(4B)
Fits Makes:
Petter-Mclaren Flywheel, Perkins Sev. applic., Ford-Thames Front hub, Cadillac Timing cover

CEP OS P NA470 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C889

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 52.4764 12.7 1 1/8 2.066 1/2 M/L(Std)
Fits Makes:
Ford-Thames Rear hub, Ford pass. Rear axle

CEP OS P NA471 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C890

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 55.753 12.7 1 1/8 2.195 1/2 M/R(3B)
Fits Makes:
Fordson tractor Trans.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA472 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C891

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 50.9016 11.1125 1 3/16 2.004 7/16

CEP OS P NA473 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C892

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 59.0804 9.525 1 9/16 2.326 3/8 M/R(4B/DAT)
Fits Makes:
Wolseley Cyl. front, Riley Cyl. front, Nuffield Timing cover, Morris Cyl. front, M.G. Cyl. front, Austin Healey Cyl. front, Austin Cyl. front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA474 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C893

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.115625 54.2036 7.540625 1 27/64 2.134 19/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA475 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C894

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45.24375 57.3532 9.525 1 25/32 2.258 3/8

CEP OS P NA476 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C895

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 63.8048 12.7 1 7/8 2.512 1/2 M/R(3B)
Fits Makes:
Nuffield Belt pulley ,, Dodge truck Sev. applic., Austin comm. Gearbox, Armstrong Sidd. Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA478 - Oil Seal

From £13.69 (£16.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C898

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
36.5125 52.4764 7.9375 1 7/16 2.066 5/16

CEP OS P NA479 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C900

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 65.1764 12.7 1 1/2 2.566 1/2 M/R(Std)
Fits Makes:
Sunbeam pass. Pinion, Singer Pinion, Humber Pinion, Hillman Pinion

CEP OS P NA480 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C901

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46.0375 60.452 7.9375 1 13/16 2.38 5/16 M/R(B/DAT)
Fits Makes:
Sunbeam pass. Front hub, Singer Front hub, Hillman Front hub, Commer Front hub

CEP OS P NA481 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C902

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 54.1782 7.9375 1 1/4 2.133 5/16 M/R(4B)
Fits Makes:
alternative - use ref. NA371t , Ford-Thames Front hub, Ford pass. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA482 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C903

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 60.579 9.525 1 9/16 2.385 3/8

CEP OS P NA483 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C904

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3375 63.6524 12.7 1 5/16 2.506 1/2 M/R(Std)
Fits Makes:
Vauxhall Pinion

CEP OS P NA484 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C905

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46.0375 63.6524 9.525 1 13/16 2.506 3/8 M/L(Std)
Fits Makes:
Jaguar Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA485 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C906

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 69.9516 26.590752 2 2.754 1.04688 M/R(Spec.)
Fits Makes:
Bedford Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA486 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C907

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 60.4266 9.525 1 9/16 2.379 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA487 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C908

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3375 54.1782 9.525 1 5/16 2.133 3/8

CEP OS P NA488 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C909

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40.48125 60.4266 11.90625 1 19/32 2.379 15/32 M/R(4B/DAT)
Fits Makes:
Morris comm. Gearbox, B.M.C. Gearbox, Austin comm. Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA489 - Oil Seal

From £16.19 (£19.43 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C910

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
29.36875 60.4266 14.2875 1 5/32 2.379 9/16 M/R(Spec.)
Fits Makes:
Vauxhall Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA490 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C911

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 60.4266 14.2875 1 1/2 2.379 9/16 M/R(Spec.)
Fits Makes:
Vauxhall Rear axle, Bedford Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA491 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C912

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 66.8528 14.2875 1 7/8 2.632 9/16
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA492 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C913

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 60.4266 11.1125 1 3/8 2.379 7/16

CEP OS P NA496 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C920

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 62.103 19.84375 1 5/8 2.445 25/32 M/R/R(D)
Fits Makes:
Fordson tractor P.T.O. drive
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA499 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C924

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 60.4266 9.525 1 5/8 2.379 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA500 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C925

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 72.1106 11.90625 1 1/2 2.839 15/32

CEP OS P NA502 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C929

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6375 63.6016 6.35 13/16 2.504 1/4 M/R(B)
Fits Makes:
Vauxhall Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA503 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C930

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
32.146875 58.2422 9.921875 1 17/64 2.293 25/64

CEP OS P NA505 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C932

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34 52 7.5 1.338583 2.047244 0.295276 M/R(4B)
Fits Makes:
Renault Rear hub

CEP OS P NA506 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C933

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48.021875 62.0776 7.9375 1 57/64 2.444 5/16 M/R(B)
Fits Makes:
Wolseley Crankshaft, Riley Crankshaft, Morris Crankshaft, Austin Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA507 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C934

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.925 54.0766 19.05 1 3/8 2.129 3/4

CEP OS P NA508 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C935

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 68 6 1.377953 2.677165 0.23622 M/R(4B)
Fits Makes:
Simca Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA509 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C936

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
48.021875 62.23 9.921875 1 57/64 2.45 25/64

CEP OS P NA510 - Oil Seal auto trans

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal auto trans

Comparable to other manufacturer part numbers - C937

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42.8625 62.103 11.90625 1 11/16 2.445 15/32 M/R(4B)
Fits Makes:
Triumph Trans. front, Singer Trans. front, Hillman Trans. front, Ford pass. Trans. front, Dodge truck Gearbox, rear, Commer Gearbox, rear, Borg-Warner Trans. front, B.M.C. grp. Trans. front
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA511 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C938

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
46.0375 64.516 17.859375 1 13/16 2.54 45/64 M/R(Spec.)
Fits Makes:
Sunbeam Front hub, Singer Front hub, Hillman Front hub

CEP OS P NA512 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C939, 5330998068588

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
49.2125 65.278 9.525 1 15/16 2.57 3/8 M/R(3B)
Fits Makes:
alternative - use ref. NA443t , Vauxhall Timing cover, Bedford Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA514 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C941

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
52.3875 73.1266 9.525 2 1/16 2.879 3/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA516 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C943

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
51.990625 69.1896 9.921875 2 3/64 2.724 25/64

CEP OS P NA518 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C945

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 73.279 12.7 2 2.885 1/2 M/R(4B/DAT)
Fits Makes:
Nuffield Timing cover, Morris comm. Timing cover, B.M.C. Timing cover, Austin comm. Timing cover

CEP OS P NA520 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C947

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40.878125 55.1942 8.73125 1 39/64 2.173 11/32 M/R(4B)
Fits Makes:
Hillman Final drive, Commer Final drive

CEP OS P NA521 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C948

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 50.9016 6.35 1 1/2 2.004 1/4 M/R(B)
Fits Makes:
Vauxhall Front hub

CEP OS P NA522 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C949

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
22.225 53.1622 12.7 7/8 2.093 1/2 M/R(B)
Fits Makes:
Vauxhall Pinion

CEP OS P NA523 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C950

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 68.453 9.525 1 9/16 2.695 3/8 M/R(3B)
Fits Makes:
Massey-Ferguson Front hub

CEP OS P NA523ML - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C950

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 68.453 9.525 1 9/16 2.695 3/8 M/L(Std)

CEP OS P NA524 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C951, 5330998118698

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 57.3532 9.525 1 1/2 2.258 3/8 M/R(4B)
Fits Makes:
Hillman Crankshaft, David Brown Rear axle csq., Commer Crankshaft

CEP OS P NA525 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C952

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 71.5264 9.525 1 7/8 2.816 3/8 M/R(B)
Fits Makes:
Rover Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA527 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C954

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.053125 64.2874 8.73125 1 47/64 2.531 11/32

CEP OS P NA528 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C955

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
38.1 52.4764 9.525 1 1/2 2.066 3/8 M/L(Std)
Fits Makes:
Triumph Front hub

CEP OS P NA529 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C956

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.275 54.0766 6.35 1 5/8 2.129 1/4 M/R(B)
Fits Makes:
Triumph Rear axle, Cov. Climax Transmission, Chevrolet Transmission

CEP OS P NA530 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C957

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 73.1266 7.9375 2 3/8 2.879 5/16 M/L(Std)
Fits Makes:
Triumph Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA531 - Oil Seal

From £17.44 (£20.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C958

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 74.7014 12.7 1 7/8 2.941 1/2

CEP OS P NA532 - Oil Seal

From £11.20 (£13.44 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C959

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 52.578 9.525 1 1/4 2.07 3/8 M/R(4B)
Fits Makes:
Rover Gearbox diff.