Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image

CEP OS P NA806 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E132

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
81 117.63 17.5 3.188976 4.631102 0.688976
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA807 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E137

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 101.73 12.7 2.748031 4.005118 1/2
Fits Makes:
alternative use ref. NA829, Leyland Sev. applic., Galion Pinion, Dennis Sev. applic., County tractor Stg. clutch, Cockshutt Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA809 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E144

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 104.9 14.2 3 8.8817841970013E-16/2 4.129921 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA811 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E152

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
80.9 114.4 12.7 3.185039 4.503937 1/2
Product Image

CEP OS P NA816 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E167

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
92.1 120.8 17.5 3.625984 4.755906 0.688976

CEP OS P NA823 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E206

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 112.8522 7.9375 3 1/2 4.443 5/16 M/L(Std)
Fits Makes:
alternative use ref. KR414, Morns comm Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA824 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E207

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 104.9 15.8 2.622047 4.129921 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA825 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E209

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 120.75 15.8 3.374016 4.753937 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA826 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E217

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 101.78 12.7 3 8.8817841970013E-16/2 4.007087 1/2
Fits Makes:
Thornycroft Diff., Tasker trailer Axle, Scania Vabis Clutch, Leyland Sev. applic, Kirkstall Wormshaft, Jowett Crankshaft, E.R.F Wormshaft, Dennis Sev. applic, David Brown Gearbox, Crossley Worm shaft, Caterpillar Sev. applic., Atkinson Sev. applic.
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA827 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E218

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 114.4 12.7 3 1/2 4.503937 1/2
Fits Makes:
Leyland Gearbox, rear, Fowler tractor Sev. applic, David Brown Final drive, Albion Speedo, A.E.C Gearbox
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA828 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E222

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.3 114.4 15.8 3.122047 4.503937 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA829 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E224, 5330994086018

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.8 101.78 12.7 2.748031 4.007087 1/2
Fits Makes:
alternative use ref E137, Thornycroft Pinion, Dennis Sev. applic, Bristol comm. Wormshaft, Atkinson lnt shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA830 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E225

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 114.4 12.7 3 8.8817841970013E-16/2 4.503937 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA836 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E244

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 103.3 12.7 3 8.8817841970013E-16/2 4.066929 1/2
Fits Makes:
Dodge truck Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA837 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E245

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.3 125.02 12.7 3.122047 4.922047 1/2
Product Image

CEP OS P NA840 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E251

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 117.1 17.4 3.374016 4.610236 0.685039
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA841 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E253

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95 125.25 13 3.740157 4.931102 0.511811
Fits Makes:
Mercedes-Benz Rear hub, Magirus Sev. applic

CEP OS P NA842 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E254

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
87.3125 114.554 12.7 3 7/16 4.51 1/2 M/R(4B)
Fits Makes:
Petter-Mclaren Flywheel, Morris comm. Front hub, B.M.C. comm. Front hub, Austin comm. Front hub, Albion Front hub
Product Image

CEP OS P NA843 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E259

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 123.11 22.6 3 1/2 4.84685 0.889764
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA844 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E263

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
82.5 114.4 15.8 3.248031 4.503937 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA847 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E269

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
87.3125 120.9294 14.2875 3 7/16 4.761 9/16
Product Image

CEP OS P NA848 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E270

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 104.775 21.034375 2 7/8 4 1/8 53/64

CEP OS P NA849 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E271, 5330998016996

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 120.8024 15.875 3 1/2 4.756 5/8 M/R/R(DA)
Fits Makes:
Scammell 1 st driving axle, Leyland Sev. applic., Albion Gearbox, A.E.C. Couplings
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA850 - Oil Seal

From £19.94 (£23.93 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E272

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.25 120.8024 12.7 3 3/4 4.756 1/2
Product Image

CEP OS P NA851 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E273

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 123.9774 28.575 3 1/2 4.881 1 1/8
Fits Makes:
Ford Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA852 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E283

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.375 101.9048 12.7 3 1/8 4.012 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA853 - Oil Seal

From £30.70 (£36.84 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E284

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
87.3125 120.8024 12.7 3 7/16 4.756 1/2
Fits Makes:
Ford-Thames Rear hub, inner, Bedford Rear hub
Product Image

CEP OS P NA854 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E286

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 123.9774 36.5125 3 1/2 4.881 1 7/16
Fits Makes:
Ford-Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA855 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E287

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
82.55 123.9774 12.7 3 1/4 4.881 1/2
Fits Makes:
Dodge truck Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA858 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E292

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.725 123.9774 12.7 3 3/8 4.881 1/2
Fits Makes:
Dodge truck Rear hub, Commer Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA859 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E293

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 103.3018 11.1125 2 7/8 4.067 7/16
Fits Makes:
Karrier Front hub, Dodge truck Front hub, Commer Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA860 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E297

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 123.825 22.225 3 1/2 4 7/8 7/8
Fits Makes:
Ford Thames Front hub

CEP OS P NA861 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E298

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
79.375 120.8024 12.7 3 1/8 4.756 1/2 M/L(Std)
Fits Makes:
Ford Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA862 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E299

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 104.8512 14.859 2 7/8 4.128 0.585
Fits Makes:
Ford Thames Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA863 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E300

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
82.55 120.65 20.6375 3 1/4 4 3/4 13/16
Fits Makes:
S. &D Front hub, Seddon Front hub, E.R.F Front hub, Atkinson Front hub, Guy Front hub, Kirkstall Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA866 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E303, 5330998083983

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.725 117.6274 9.525 3 3/8 4.631 3/8
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA867 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E304

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
90.5 123.98 9.5 3.562992 4.881102 0.374016
Fits Makes:
Scammell F.&R.hub, Guy Front hub, A.E.C. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA868 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E305

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
92 123.8 19 3.622047 4.874016 0.748031
Fits Makes:
Guy Front hub, E.R.F Front hub, Atkinson Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA869 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E306

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
92 110 16 3.622047 4.330709 0.629921
Fits Makes:
Volvo Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA870 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E307

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 111.37 12.7 3.374016 4.384646 1/2
Fits Makes:
Nuffield tractor Pinion, B.M.C Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA872 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E309

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.2 120.5 21.4 3.748031 4.744094 0.84252
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA874 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E311

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 111.4 19.05 3.374016 4.385827 3/4
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA875 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - E313

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 114.6 12.7 3 1/2 4.511811 1/2
Fits Makes:
Seddon Gearbox, rear

CEP OS P NA876 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F103

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 130.3274 12.7 3 1/2 5.131 1/2 M/L(Std)
Fits Makes:
alternative use ref. NA911t, Leyland Rear hub, Bedford Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA877 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F104

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
80.9 131.95 12.7 3.185039 5.194882 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA878 - Oil Seal

From £28.65 (£34.38 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F106

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 131.95 12.7 3.374016 5.194882 1/2
Fits Makes:
S &D Rear hub, Seddon Rear hub, Dodge truck Rear hub, Dennis Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA879 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F107

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.7 133.45 15.8 3.374016 5.253937 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA880 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F109

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
92 133.45 15.8 3.622047 5.253937 0.622047

CEP OS P NA881 - Oil Seal

From £29.90 (£35.88 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F113

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 136.652 11.1125 3 7/8 5.38 7/16 M/L(Std)
Fits Makes:
Thornycroft Rear hub, Tasker trailer Axe, Seddon Rear hub, Leyland Rear hub, Eaton axe Rear hub, Dodge truck Rear hub, B.T.C trailer Axle, Brockhurst Axe, Atkinson Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA883 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F115

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.2 146.2 11.1 3.748031 5.755906 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA884 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.2 127.1 11.9 3.748031 5.003937 0.468504

CEP OS P NA886 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F142

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.25 130.1496 11.90625 3 3/4 5.124 15/32 M/R(B)
Fits Makes:
Morris comm Hearh.rb, Dodge truck RearhJb, Austin comm. Flear h.rb, Albion Rear hub
Product Image

CEP OS P NA887 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F143

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
100 136.68 26.2 3.937008 5.381102 1.031496
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA888 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F146

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.4 130.33 15.8 3.874016 5.131102 0.622047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA889 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F147

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
123.8 146.28 11.1 4.874016 5.759055 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA890 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F154

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
80.4 131.88 12.7 3.165354 5.192126 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA891 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F156

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
111.1 139.85 9.5 4.374016 5.505906 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA892 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F157

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.6 146.2 12.7 4.748031 5.755906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA893 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F158

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.6 146.2 9.5 4.748031 5.755906 0.374016
Fits Makes:
Scammell Front hull, Kirkstall axle Rear 'l'Jb, Albion Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA895 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F162

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.4 144.68 19 3.874016 5.696063 0.748031
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA896 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F166

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
107.9 143.03 12.7 4.248031 5.631102 1/2
Fits Makes:
alternative JSe ref. NA903, Vulcan Rear hub, Thornycroft Rear hub, Seddon Rear r-ub, Leyland Rear hub, E.R.F. Rear l-ub, Eaton axle Rearhub, Dodge truck Rear hub, Boys axle Rear hub, B.M.C Rearhub, Bedford Rearhub, Austin comm Rearhub, Atkinson Rear hub, Albion Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA897 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F168

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.2 136.63 12.7 3.748031 5.379134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA898 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F169

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 146.2 12.7 4 5.755906 1/2

CEP OS P NA899 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

S &D Rear hub, Seddon Rem hub, Dodge truck Rear hub, Dennis Rear hub

Comparable to other manufacturer part numbers - F180

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.25 143.0274 12.7 3 3/4 5.631 1/2 M/L(Std)
Fits Makes:
S &D Rear hub, Seddon Rem hub, Dodge truck Rear hub, Dennis Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA900 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F181

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 127.15 12.7 4 5.005906 1/2
Fits Makes:
Thornycroft Rear hub, Tasker trailer 'Axle, Rootes engine Cyl rear, Kirkstall axle Rear hub, Karrie, Crankshaft, Fowler tractor Final drive, Commer Cranxshaft, Beadle Cranxshaft, Atkinson Rear hub

CEP OS P NA901 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F184

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 127 11.1125 3 7/8 5 7/16 M/R BEC(G)
Fits Makes:
Sentinel Front hub, Kirkstall Front hub, Guy Front hub, E.R.F. Front hub, Crossley Front hub, Atkinson Front hub, A.E.C Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA902 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F185

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 139.85 12.7 4 1/2 5.505906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA903 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F186

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
107.9 143.18 12.7 4.248031 5.637008 1/2
Fits Makes:
alternative use ref. NA896, Seddon Rear hub, Morris comm. Rear hub, Boys axle Rear hub, B.M.C. comm. Rear hub, Austin comm. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA904 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F187

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
106.4 146.2 11.1 4.188976 5.755906 0.437008
Fits Makes:
Leyland Rear hub, Dodge truck Rear hub, Commer Rear hub, Beadle Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA905 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F188

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
107.9 146.2 11.1 4.248031 5.755906 0.437008
Fits Makes:
Leyland Rearhub, E.R.F. Rear hub, Eaton axle Rear hub, Dodge truck Rear hub, Dennis Rear hub, Commer Rear hub, Carrimore Axle, Bedford Rear hub, Atkinson Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA906 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F189

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 136.6 11.1 3 1/2 5.377953 0.437008
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA907 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F190

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
130.1 155.87 12.7 5.122047 6.136614 1/2
Fits Makes:
Leyland Rearhub, Foden Rear hub, outer, Albion Rear hub, A.E.C. Rearhub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA908 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F191

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.4 130.33 12.7 3.874016 5.131102 1/2
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA910 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F194

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 127.1 11.9 3 1/2 5.003937 0.468504

CEP OS P NA911 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F196

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 130.3274 12.7 3 1/2 5.131 1/2 M/R(Std)
Fits Makes:
alternative - use ref. NA876 , Leyland Rearhub

CEP OS P NA913 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F206, 5330998953785

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
93.6625 130.3274 11.90625 3 11/16 5.131 15/32 M/L(Std)
Fits Makes:
Bedford Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA914 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Bedford Rear hub

Comparable to other manufacturer part numbers - F207

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
93.6625 143.0274 12.7 3 11/16 5.631 1/2
Fits Makes:
Bedford Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA915 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F208

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 130.3274 14.2875 4 5.131 9/16
Fits Makes:
alternative - use ref. NA894 , Standard eng. Crankshaft, Massey-Ferguson Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA916 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F209

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
117.475 143.1798 12.7 4 5/8 5.637 1/2
Fits Makes:
Morris comm. Rear hub, Dennis Rear hub, B.M.C. comm. Rear hub, Austin comm. Rear hub
Product Image

CEP OS P NA917 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F210

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 130.3274 36.5125 3 1/2 5.131 1 7/16
Fits Makes:
Ford-Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA918 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F211

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 136.652 21.828125 3 7/8 5.38 55/64
Fits Makes:
Thornycroft Front hub, S. &D. Front hub, Sentinel Front hub, Seddon Front hub, Kirkstall axle Front hub, Guy Front hub, E.R.F. Front hub, Dodge truck Front hub, Crossley Front hub, Atkinson Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA920 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F213

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.65 145.4404 12.7 4 3/4 5.726 1/2
Fits Makes:
Foden Rear hub, Dodge truck Rear hub, Albion Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA921 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F214

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 143.0274 36.5125 3 7/8 5.631 1 7/16 M/L(Spec.)
Fits Makes:
Ford-Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA922 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F215

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.65 146.3548 9.921875 4 3/4 5.762 25/64
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA923 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F217

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 139.954 11.1125 4 1/2 5.51 7/16

CEP OS P NA924 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F218

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 133.4516 12.7 3 7/8 5.254 1/2 M/L(Std)
Fits Makes:
Karrier Rear hub, Dodge truck Rear hub, Commer Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA925 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F221

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
98.425 144.6784 12.7 3 7/8 5.696 1/2
Fits Makes:
Ford-Thames Rear hub

CEP OS P NA926 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F222

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
100.0125 136.6774 11.1125 3 15/16 5.381 7/16 M/L(Std)
Fits Makes:
Ford-Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA927 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F223

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 150.876 10.31875 2 3/8 5.94 13/32
Fits Makes:
Ford-Thames Rear hub, outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA928 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F224

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
128.5875 155.8798 12.7 5 1/16 6.137 1/2
Fits Makes:
B.M.C. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA929 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F225

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
107.95 139.8524 9.525 4 1/4 5.506 3/8
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA930 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F226

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 162.0774 14.2875 4 1/2 6.381 9/16
Fits Makes:
Bedford Rear hub

CEP OS P NA931 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F227

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 139.8524 12.7 4 5.506 1/2 M/L(Std)
Fits Makes:
Leyland Front hub, Guy Front hub, Dodge truck Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA933 - Oil Seal

From £34.07 (£40.88 inc. VAT @ 20%)

Nuffield tractor Crankshaft, rear, B.M.C. Crankshaft, rear

Comparable to other manufacturer part numbers - F230

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
127 146.05 11.1 5 5 3/4 0.437008
Fits Makes:
Nuffield tractor Crankshaft, rear, B.M.C. Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA934 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F231

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
101.6 139.95 12.7 4 5.509843 1/2
Fits Makes:
A.E.C. Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA935 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F232

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 146.3 21.8 4 1/2 5.759843 0.858268
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA936 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F233

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 140 12.7 4 1/2 5.511811 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA938 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F236

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
107.9 139.95 15.8 4.248031 5.509843 0.622047
Fits Makes:
Guy Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA940 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G108

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
111.1 152.43 14.2 4.374016 6.001181 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA942 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G119

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
127 152.55 14.2 5 6.005906 0.559055
Fits Makes:
alternative use ref. NA954, Leyland Front hub