Round 2 terminal, black bakelite junction box with screw cover. 1 1/2" (38mm) diameter. Equivalent to Lucas Model No. 2J, part number 78265. Re-manufactured part.
Comparable to other manufacturer part numbers - 2J, 78265
232.55763
Vintage Car Parts - Electrical Accessories - Junction Boxes
Round, 6 terminal, black bakelite junction box with screw cover, 2 3/8" (60mm) diameter x approximately 36mm high. Equivalent to Lucas Model No. 6J, part number 78266. Re-manufactured part.
Comparable to other manufacturer part numbers - 6J, 78266, 2H2639
232.55763
Vintage Car Parts - Electrical Accessories - Junction Boxes
Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...
Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....
Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....
Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....
Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....
Quality flat headlamp stoneguards 7" (approximately 178mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....
Steel rear lamp bracket suitable for divers helmet rear lamps and similar, requiring spade mounting. This part is pre-fabricated and supplied undrilled. Overall height approx 125mm. Fitting to the...
200.0239
Vintage Car Parts - Lamps - Rear Lights - Brackets & Cable Covers
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Comparable to other manufacturer part numbers - 144-701, 57124
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Lucas type RER25 Round red reflector with deep chromium surround, rubber back, flat, screw fixing. Approx 51mm base diameter. Also offered with a polished brass or nickel plate finished rim.
Brass body adjustable ball joint. Non detachable, 10/32" UNF thread into body x 1/4" UNF thread on pin. Has a cross pin to retain a screw adjuster in the end.
200.0239
Vintage Car Parts - Specialist Fittings - Ball Joints
Large brass oil syringe with long spout and T handle. An invaluable tool for anyone whose car has an awkward to get at gearbox or rear axle filler. Body 40mm diameter x 340mm long, overall length...
200.0239
Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Small brass oil syringe for topping up the oil in your gearbox or rear axle etc. Approx 25mm diameter x 215mm long (overall 247mm). Offered with two spouts. New old stock, will show signs of age....
200.0239
Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Clevis pin and yoke for brake and control ends. 3/16" diameter pin x 3/16" UNF female right hand thread - 3/16" between forks (nominal 4.5mm size), steel with pin.
200.0239
Vintage Car Parts - Specialist Fittings - Yoke Ends & Clevis Pins
Badge bar bracket - can be used for small spot lamps etc. Suitable for 19mm bars but will fit a 25mm bar. Lamp hole 15.5mm diameter. Overall size 63mm x 32mm.
200.0239
Vintage Car Parts - Badgebars & Badges - Badgebar Clips & Brackets
`Pratts' transfers for petrol/fuel cans etc. reproduced for that authentic touch. See fitting instructions regarding application. Measures approx 165mm wide x 115mm high overall.
200.0239
Vintage Car Parts - Accessories - Signs and Transfers
Rudge-Whitworth transfer. Add the finishing touch to Rudge-Whitworth wheels with these self-adhesive transfers. Faithful reproductions of the originals in red/gold. See fitting instructions...
200.0239
Vintage Car Parts - Accessories - Signs and Transfers
Reproduction of the original Shell transfer for petrol/fuel cans etc. Please see fitting instructions regarding application. Measures approx. 105mm wide x 108mm high overall.
200.0239
Vintage Car Parts - Accessories - Signs and Transfers
6 Volt Horn - black with chrome ring, attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm mounting hole
200.0239
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
12 Volt Horn - black with chrome ring attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade/Lucar terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm...
200.0239
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
High quality 12 volt all black disc horn. 75mm diameter with mounting bracket and 8mm clearance hole.This horn has two terminals so the body of the horn is insulated, making it suitable for 12...
200.0239
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
12V windtone horns with high and low notes. Black plastic body with chrome grilles and covers. 90 mm diameter body. Supplied with mounting brackets, screws, nuts, relay and instructions. E marked....
200.0239
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Cast brass rear lamp bracket suitable for divers helmet rear lamp and similar requiring spade mounting, oval mounting base (undrilled) 76mm tall x 31mm wide, mounting bar 80mm long with lamp spade...
200.0239
Vintage Car Parts - Lamps - Rear Lights - Brackets & Cable Covers
Base mounted stone guard with 6" diameter mesh - for 5 3/4" diameter '576' series Lucas type spot and fog lamps, as well as Lucas FT27 type spot lamps. Chrome plated cast bronze base, fitted with...
Base mounted stone guard with 7 1/2" diameter mesh - for 7" spot lamps e.g. the CLR700 Lucas type lamp. Chrome plated cast bronze base, fitted with stainless steel 1" diameter knurled knob, bolt...
Small 12 volt electric horn with black body. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket with 8.3mm hole. Two 6.3mm slade/Lucar type connections
200.0239
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Chrome on brass, dished handmade stoneguard, 5.5" diameter suitable for protecting smaller spot and fog lamps. Will require mounting bracket to hold in position. 11mm mesh aperture, 1 1/4" dish...
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
199.91081
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
199.91081
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
199.91081
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
199.91081
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
199.91081
Vintage Car Parts - Fuel System Components - Fuel Filtration
