Mortice budget lock - for side fixing, mounting plate 95mm x 22mm with fixing holes centred at 77mm, mortice lock casing 55mm long x 9mm wide x 22mm deep, lock tongue extends 16mm and is 19mm tall...
367.9961
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Locks
We offer replacement keys, cut for door and ignition switch. These are cut to number only, 2 keys are supplied. Supply is restricted to the following key series - key sequence numbers MRN1 through...
Keyhole escutcheon - flap is hinged at the top and opens up against a spring. 2 hole (21mm centres) fixing in base plate - chromium finish. Approx 29mm diameter.
353.073
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Surface mount lightweight door lock with stainless steel cover plate. Rear pull to open, no provision for shaft of external handle. Mounting screws 33mm horizontal, 44.5mm vertical. The lock...
322.08432
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Replacement dovetail wedge and nut only (no mounting plate). Dimensions - wedge 20mm across (wide end) 11mm across (narrow end) 22mm deep. 5/16" stud 35mm long (18mm threaded section).
320.80463
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Striker Plates
Small chromium plated, surface mount door lock with lever to top, of a design common to many 'vintage' locks. Base size 86mm x 51mm approx. Original early Morgan style. Square hole for handle...
317.6296
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Small chromium plated, surface mount door lock with lever to top, of a design common to many 'vintage' locks. Base size 86mm x 51mm approx. Original early Morgan style. Square hole for handle...
317.6296
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Small chromium plated, surface mount door lock with lever to top, of a design common to many 'vintage' locks. Base size 86mm x 51mm approx. Original early Morgan style. Square hole for handle...
317.6296
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Locking chrome plated swept type door handle, supplied in PAIRS only to suit left and right of vehicle. Escutcheon hole centres 36mm, Matched key sets.
304.49194
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - flap is hinged at the top and opens by sliding sideways against a spring. 2 screw fixing showing on outside of the cover. Offered in chromium or nickel plated finish....
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Keyhole escutcheon - brass construction, flap is hinged at the top and opens up. 2 hole (35mm centres) fixing in base plate - available in polished brass, chromium or nickel finish. Lid measures...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - General Accessories - Covers
Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Nicely shaped exterior door handle with slightly hollowed centre area, chromium finish, approx 100mm long. Mounting ecsutcheon hole centres approx 36mm centres. Shaft length is only 40mm long but...
304.34924
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Locking choke cable 1500mm long which can be shortened as required. Requires 9.1mm panel hole for fixing. Inner bowden wire cable. The plastic knob is of modern appearance as used on many 1960's...
304.34924
Vintage Car Parts - Fuel System Components - Choke Cables
Remote action cast brass door lock complete with lever mechanism. Lock 83mm x 89mm brass finish. Overall length of lock to lever (handle mounting) 340mm. Use with striker plate part numbers 541 or...
267.76935
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting lock with top lever action. Base 51mm x 86mm zinc plated. With a little handle adaptation this lock can be modified quite easily to assume a vintage appearance. Square hole for...
267.73758
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting lock with top lever action. Base 51mm x 86mm zinc plated. With a little handle adaptation this lock can be modified quite easily to assume a vintage appearance. Square hole for...
267.73758
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting lock with top lever action. Base 51mm x 86mm zinc plated. With a little handle adaptation this lock can be modified quite easily to assume a vintage appearance. Square hole for...
267.73758
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
265.2663
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
265.2663
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
'Silent-travel' lock, as used on MG and other pre-war cars, chrome finish 63mm wide 75mm tall body, chrome cover. Facility for shaft of exterior handle to fit into back. Use striker plate part...
265.2663
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
251.86357
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
251.86357
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Shaped outside handle approx 100mm long fitted with mounting escutcheon, chromium plate finish. Offered locking or non locking. We offer this handle with a flat base escutcheon (35mm hole centres)...
251.86357
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Choke cable assembly with chrome locking Tee knob, black outer and flexible inner cable. Approx 1500mm length (inner wire 1670mm length). Tee handle measures 51mm, panel hole required is 9.5mm.
248.53001
Vintage Car Parts - Fuel System Components - Choke Cables
Torpedo shaped chrome plated exterior door handles with slightly depressed black finish centre area and squared off ends, approx 93mm long x 22mm wide. Mounting escutcheon 53mm x 23mm with hole...
247.82158
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Locking type Wilmot Breeden chrome plated fuel filler cap. 2 point bayonet fitting cap supplied complete with two keys. Preferred filler neck size inside minimum 37mm, locating tangs max 46mm...
247.82158
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc.
Please note, the shaft is only 60mm...
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium finish handle 132mm long. Fitted with special heart-shaped escutcheon, with mounting holes at 36mm centres. As fitted to MGTF, Morris Series E etc.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Chromium plated with slight raised rib on face 110mm long. Offered with large and small mounting escutcheons, hole centres as indicated. Shaft is an 8mm square and 110mm long.
247.66676
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome & Nickel Door
Unfortunately we no longer offer a refurbishment and repair service for Armstrong etc. lever arm type shock absorbers. If you have units you are struggling to repair, please contact us and we will...
Heavy surface fitting door lock suitable for heavier doors, 78mm x 76mm approx with lever to top. Body stands 19mm proud of mounting panel, with facility for square (6mm size which can be opened...
208.47803
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Heavy surface fitting door lock suitable for heavier doors, 78mm x 76mm approx with lever to top. Body stands 19mm proud of mounting panel, with facility for square (6mm size which can be opened...
208.47803
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Heavy surface fitting door lock suitable for heavier doors, 78mm x 76mm approx with lever to top. Body stands 19mm proud of mounting panel, with facility for square (6mm size which can be opened...
208.47803
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Heavy surface fitting door lock suitable for heavier doors, 78mm x 76mm approx with lever to top. Body stands 19mm proud of mounting panel, with facility for square (6mm size which can be opened...
208.47803
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Heavy surface fitting door lock suitable for heavier doors, 78mm x 76mm approx with lever to top. Body stands 19mm proud of mounting panel, with facility for square (6mm size which can be opened...
208.47803
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting door lock, with a lever handle similar to pre-war shape. Base size approx 87mm x 51mm with a long tongue, particularly suitable for open bodywork, plated finish. Square hole for...
206.41101
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting door lock, with a lever handle similar to pre-war shape. Base size approx 87mm x 51mm with a long tongue, particularly suitable for open bodywork, plated finish. Square hole for...
206.41101
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Surface fitting door lock, with a lever handle similar to pre-war shape. Base size approx 87mm x 51mm with a long tongue, particularly suitable for open bodywork, plated finish. Square hole for...
206.41101
Vintage Car Parts - Coachbuilding and Body Fittings - Door Locks & Striker Plates - Door Locks
Moulded rubber for front windscreen / screen, standard type. 3.0mtr long, we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.
Moulded rubber for rear windscreen / screen, standard type. 2.75mtr long we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.
Chrome on brass. Can be locked with small padlock (not supplied). Base 75mm x 30mm, overall 93mm. Base has four mounting holes and top bracket has two mounting holes.
28.081268
Vintage Car Parts - Coachbuilding and Body Fittings - Catches & Fasteners - Over Centre
Chrome plated T locking door handle, 99mm long fitted with mounting escutcheon with 35mm hole centres. Particularly suited to van rear doors. Shaft will require cutting to suit application.
28.081268
Vintage Car Parts - Coachbuilding and Body Fittings - Handles & Escutcheons - Exterior - Chrome 'T'
Flanged aluminium neck with internal spigot for 2" (51mm) pipe. Thread 3 1/2" BSP, overall diameter 126mm. 6 holes with 4.5" pcd. This flange will accept the LIK1 locking filler cap
28.081268
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) pipe. Thread 2" x 18TPI, overall diameter 82mm. 6 holes at 2.5" pcd. Please note - this flange will NOT accept the LIK1 locking filler cap.
28.081268
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Ignition switch - panel mount with two keys. Requires 19mm diameter hole. 2 key positions - OFF/ON only. Equivalent part to Lucas part number 54316731 (lock and key) and 30608 (switch body)
Comparable to other manufacturer part numbers - 54316731, 30608
'Chrome' finish plastic T section windscreen filler/lock strip for windscreen weatherstrip. 'T' shape filler approx 7.6mm wide x 7mm tall with a 3.5mm diameter bead at the base. As used on the...
28.081268
Vintage Car Parts - Rubber & Sponge Parts - Rubber Extrusions - Filler Strip
Ivory colour - Solenoid starter (spring loaded) switch metal twin screw connectors. 22.5mm hole fixing. Short type for metal dash. Maximum dash thickness 5mm. Supplied complete with plastic lock nut
28.081268
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Replacement hinge pin, spring, tag washer and nut for 64mm tall steel self aligning hinge. Please order brass ball separately. Dimensions, overall length 77mm (73mm under countersink), 6mm...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Hinges - Pins & Balls
Dzus type 40 fastener with 16mm reach for panel fixing with easy removal. 16mm dia slotted countersunk head on panel fixing plate 38mm x 22mm, cadmium plated. 1/4 turn to lock on to wire spring...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Catches & Fasteners - Fasteners
Angled mounting catch ideal for tool boxes etc. Chrome on brass. Can be locked with small padlock (not supplied). Base 63mm x 30mm, overall 83mm. Base has four mounting holes and top bracket has...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Catches & Fasteners - Over Centre
Dzus type 40 fastener with 13mm reach for panel fixing with easy removal. 16mm diameter slotted countersunk head on panel fixing plate 38mm x 22mm, cadmium plated. 1/4 turn to lock on to wire...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Catches & Fasteners - Fasteners
Replacement hinge pin, spring, tag washer and nut for 51mm tall steel self aligning hinge, order brass ball separately. Dimensions, overall length 65mm (61mm under countersink), 6mm diameter...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Hinges - Pins & Balls
Replacement hinge pin, spring, tag washer and nut for 38mm tall steel self aligning hinge. Order brass ball separately. Dimensions overall length 47mm (43mm under countersink), 6mm diameter...
23.122196
Vintage Car Parts - Coachbuilding and Body Fittings - Hinges - Pins & Balls
Shallow dome head lamp base repair kit. Approx. 11mm diameter across head of bolt, stem approx. 4.5mm thread x 12mm long. Polished stainless steel, supplied with hex nuts. Per packet of 12 bolt...
23.122196
Vintage Car Parts - Lamps - Lamp Accessories - Studs, Nuts & Fixings
Flanged aluminium neck with internal spigot for 2" (51mm) or 2 1/4" (57mm) pipe. Thread 2.5" x 16TPI, overall diameter 94mm. 6 holes at 3" pcd. This flange will accept the LIK1 locking filler cap.
23.122196
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) or 2 1/4" (57mm) pipe. Thread 2 3/4" x 16TPI, overall diameter 94mm. 6 holes at 3" PCD. This flange will accept the LIK1 locking filler cap
23.122196
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
17.449406
Vintage Car Parts - Rubber & Sponge Parts - Rubber Extrusions - Flanged Channel & Glazing Strips
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
17.449406
Vintage Car Parts - Rubber & Sponge Parts - Rubber Extrusions - Flanged Channel & Glazing Strips
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
17.449406
Vintage Car Parts - Rubber & Sponge Parts - Rubber Extrusions - Flanged Channel & Glazing Strips
Face/top rail mounting larger type vintage interior mirror with upper lip on bracket. FLAT glass 125mm x 65mm, with an attractive bevel edge and shaped ends. The mounting bracket is triangular...
17.449406
Vintage Car Parts - Mirrors - Interior Mirrors - Vintage
PLC6 type combined key on/off and off/side/head lamp switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are displayed on a white background through...
Comparable to other manufacturer part numbers - 34055, 34002, 34014, 34018, 34026, 34035, 34075
In-line circular body brass tap with cork gasket under the lever. Tank side fitting with 1/4" BSP thread under hexagon. Coned 1/4" BSP outlet connection for 1/4" nut and nipple connection. Overall...
17.449406
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Two piece metal end connector for 10mm diameter conduit with male 16mm metric thread. Supplied with lock nut. Do not tighten ferule completely until satisfied with assembly position as ferule and...
17.449406
Vintage Car Parts - Cable & Wiring Components - Conduit & End Fittings
Two piece metal end connector for 12mm diameter conduit with male 16mm metric thread. Supplied with lock nut. Do not tighten ferule completely until satisfied with assembly position as ferule and...
17.449406
Vintage Car Parts - Cable & Wiring Components - Conduit & End Fittings
Two piece metal end connector for 20mm diameter conduit with male 25mm metric thread. Supplied with lock nut. Do not tighten ferule completely until satisfied with assembly position as ferule and...
17.449406
Vintage Car Parts - Cable & Wiring Components - Conduit & End Fittings
Pillar mounted spotlamp with rear view mirror made to original Raydyot HS495 patten. Chrome on brass. Pillar mounted on adjustable mounting arm and bracket. Lamp 112mm diameter x 93mm deep, mirror...
14.437435
Vintage Car Parts - Lamps - Spot, Fog & Driving Lights
Reproduction pillar-mounted spot lamp or searchlight. Chrome plate on brass lamp to original Raydyot HS495 or HSU.495 pattern, with adjustable mounting arm and bracket with handle. Lamp 112mm...
11.40443
Vintage Car Parts - Lamps - Spot, Fog & Driving Lights
