Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Seals

Store
Oil Seals

Material Abbreviations

Prefix letters:

M = Metal Case or Re-inforcement
B = Cork Sealing Element
F = Felt Sealing Element
L = Leather Sealing Element
R = Synthetic Rubber Element (Nitrile)
Si = Silicone Rubber Element
Vi = Viton Rubber Element
Py = Polyacrylic Rubber Element
S = Steel Case or Re-inforcement
B = Brass Case or Re-inforcement

Seal Type – (See images below).

Suffix Letters:

R/H = Right Hand Rotation (Helix or Spiral)
L/H = Left Hand Rotation (Helix or Spiral)
Bi/D = Left or Right Hand Rotation (Bi-directional, Helix or Spiral)

Examples

M/F/L = Metal Case (or Re-inforcement) with (one) Felt and (one) Leather Sealing elements
M/Si(4B)L/H = Metal Case (or Re-inforcement) with (one) Silicone Sealing element, 4B seal design, Left Hand Rotation

Points of note with regard to oil seals:

  • Where it is necessary to replace a bearing or to disturb a seal, a new seal of the correct type and dimensions should be fitted. This is essential in the case of seals that protect the bearings in the hubs (front and rear). If these leak, braking efficiency is reduced. The three key dimensions as indicated in the search facility are:

    • The diameter of the housing into which the seal fits.

    • The diameter of the shaft on which the seal runs.

    • The width of the seal.

  • There are two main types of Oil Seal:-

    • Internal - fitted into the housing and remaining stationary whilst the shaft revolves inside the sealing element.
    • External - fitted on the shaft or boss and the housing rotates round the seal. This type of seal is found mostly in hubs.
  • Shafts should be checked for scoring. Score marks or burrs should be carefully removed.

  • Housings - The surface into which the seal fits should be perfectly smooth. All traces of abrasive matter or degreaser should be removed. Where seals are fitted into an aluminium or alloy housing, a greater amount of interference will be required. A useful tip is to immerse the housing in boiling water for a few minutes, remove it, and whilst it’s still hot, mount the seal and then allow to cool before assembly.
  • Fitting:
    • Remove all abrasive matter from shaft and housing.
    • Remove grease from the seal - use white spirit for leather and thin lubricating oil for synthetic rubber.
    • Smear the sealing element lightly with thin engine oil.
    • If using a dual type seal, always pack the space between the elements with a good quality grease.
    • The Tension Spring is designed to provide the correct loading and should not be altered. Note that the diameter of the sealing element should be approximately 1/16 " smaller than the shaft diameter, although in special applications it may be necessary to provide a different interference.
    • Ensure that the seal is mounted the correct way round. To retain oil or grease, the sealing lip must face the bearing, and to exclude dirt, the sealing lip should point away from the bearing.
    • The use of an Arbor Press is recommended when mounting the Oil Seal into the housing. Alternatively use a bung or drift slightly smaller in diameter than the steel shell of the seal, and ensure that the seal enters the housing squarely.
    • When mounting the shaft into the seal, the best method is to use a thin tapered sleeve.
    • If the housing is a heavy casting, do not allow the seal to rest on the shaft under its weight for any length of time as a permanent set may develop in the sealing element, which will render the seal ineffective. This is a vital consideration in the case of synthetic rubber seals.
Files

Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA944 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
130.1 162.08 14.2 5.122047 6.381102 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA945 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G127

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
146 171.6 12.7 5.748031 6.755906 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA946 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G130

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
104 162.45 14.2 4.094488 6.395669 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA947 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G131

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
149.2 174.78 14.2 5.874016 6.881102 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA948 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G135

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
111.1 152.43 12.7 4.374016 6.001181 1/2
Fits Makes:
Hands trailer Axle, Dennis Rear hub, Atkinson Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA949 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G136

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
111.1 158.75 14.2 4.374016 6 1/4 0.559055
Fits Makes:
White Rearhub, Mack Rear hub, lnternat. truck Rear hub, Ford truck Rear hub, Eaton axle Rear hub, Diamond T Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA950 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G141

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
104 162.58 14.2 4.094488 6.400787 0.559055
Fits Makes:
A.E.C. Rear hub

CEP OS P NA951 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G142

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.65 152.5524 14.2875 4 3/4 6.006 9/16 M/L(Std)
Fits Makes:
Leyland Rearhub, Galion Trans., E.R.F. Rear hub, Eaton axle Rear hub, Dodge truck Rear hub, Commer Rearhub, Bedford Rear hub, Atkinson Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA953 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G146

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
130.1 162.08 14.2 5.122047 6.381102 0.559055
Product Image

CEP OS P NA955 - Oil Seal

From £22.43 (£26.92 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G149

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
127 222.25 28.6 5 8 3/4 1.125984
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA957 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G157

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
133.35 159.0548 12.7 5 1/4 6.262 1/2
Fits Makes:
Perkins Crankshaft
Product Image

CEP OS P NA960 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G160

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
146.05 168.2496 15.08125 5 3/4 6.624 19/32
Fits Makes:
Rover Swivel pin for 5¾" spherical shaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA961 - Oil Seal

From £43.62 (£52.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G161

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
130.175 222.25 28.575 5 1/8 8 3/4 1 1/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA962 - Oil Seal

From £37.39 (£44.87 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G162

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 155.194 10.31875 2 1/2 6.11 13/32
Fits Makes:
Ford truck Rear axle, outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA963 - Oil Seal

From £37.39 (£44.87 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G163

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 155.194 10.31875 2 1/2 6.11 13/32
Fits Makes:
Ford truck Rear axle, outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA964 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G164

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 171.6024 14.2875 4 1/2 6.756 9/16
Fits Makes:
S. &D. Rear hub, Seddon Rear hub, Moss Rear hub, Guy Rear hub, Dodge Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA965 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G165

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
122.2375 140.4874 12.7 4 13/16 5.531 1/2
Fits Makes:
Ford (tractor) Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA966 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G166

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
109.5 158.7 14.2 4.311024 6.248031 0.559055
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA967 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G167

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
130.1 155.25 12.7 5.122047 6.112205 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA969 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Rubery Owen Hub, High-way Trailer axle

Comparable to other manufacturer part numbers - G169

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
120.6 152.55 22.2 4.748031 6.005906 0.874016
Fits Makes:
Rubery Owen Hub, High-way Trailer axle

CEP OS P NA971 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H104, 71968

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
158.75 182.7022 15.875 6 1/4 7.193 5/8 M/L(Std)
Fits Makes:
alternative - use ref. NA975t , Leyland Rearhub, Kirkstall axle Rear hub, Ford military Front axle, B.U.T. Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA973 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H114

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
152.4 178 12.7 6 1.7763568394003E-15/2 7.007874 1/2
Fits Makes:
alternative - use ref. NA970 , Leyland Sev. Applic., B.U.T. Front hub, Albion Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA974 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H117

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.675 177.8 17.4625 2 5/8 7 1.7763568394003E-15/2 11/16
Fits Makes:
Ford-Thames Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA975 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H118

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
158.75 182.7022 15.875 6 1/4 7.193 5/8
Fits Makes:
alternative - use ref. NA971t , Leyland Front & Rear Hub, Albion Front & Rear Hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA976 - Oil Seal

From £27.42 (£32.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H119

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
145.1 193.85 15.75 5.712598 7.63189 0.620079
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA977 - Oil Seal

From £31.14 (£37.37 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - H120

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
69.85 208.026 11.90625 2 3/4 8.19 15/32 M/L(Spec.)
Fits Makes:
Ford Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA980 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L102

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3375 53.2638 9.525 1 5/16 2.097 3/8
Fits Makes:
Triumph pass. Front hub, Standard Front hub
Product Image

CEP OS P NA981 - Land Rover Crankshaft Seal

From £51.33 (£61.60 inc. VAT @ 20%)

LandRover and Rover Crankshaft Rear Oil Seal - 2 part. see applications below.

Comparable to other manufacturer part numbers - L103

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 138.8872 15.478125 2 3/8 5.468 39/64 M/R(Spec.)
Fits Makes:
Rover Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA982 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L104

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 97.6122 22.225 1 3/4 3.843 7/8
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA983 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L105

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
73.025 107.823 19.05 2 7/8 4.245 3/4
Fits Makes:
Bedford Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA984 - Oil Seal

From £50.20 (£60.24 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L110

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
62.70625 139.7 15.478125 2 15/32 5 1/2 39/64
Fits Makes:
Rover Crankshaft
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA986 - Oil Seal

From £49.85 (£59.82 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L112

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
95.25 139.5476 12.9032 3 3/4 5.494 0.508
Fits Makes:
Rover Crankshaft, rear

CEP OS P NA987 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Rover Rear main bearing

Comparable to other manufacturer part numbers - L113

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
65 82.9 7.65 2.559055 3.26378 0.301181 M/R(4B) split type
Fits Makes:
Rover Rear main bearing
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA988 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L114

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 53.5178 7.9375 1 9/16 2.107 5/16 M/F(Spec.)
Fits Makes:
Triumph Front hub, Standard Front h1 F, Leyland Front hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA989 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - L115

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
37.30625 63.5 15.875 1 15/32 2 1/2 5/8 M/C(Spec.)
Fits Makes:
Vauxhall Front hub (Without disc brakes)
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA993 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - V101

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 60.43 11 1.751969 2.379134 0.433071
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA996 - Oil Seal

From £6.23 (£7.48 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - V106

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 74.5 14.5 1.771654 2.933071 0.570866 M/R(Spec.)
Fits Makes:
Mercedes-Benz Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NA997 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - V107

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.18125 81.28 20.6375 2 3/32 3.2 13/16 M/R/Si(Spec.)
Fits Makes:
Massey-Ferguson Rear axle
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB001 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W110

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
24.6 33.33 28.5 0.968504 1.312205 1.122047
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB003 - Oil Seal

From £23.62 (£28.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W112

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 23.81 5.6 1/2 0.937402 0.220472
Product Image

CEP OS P NB018 - Oil Seal

From £23.62 (£28.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W116, 15445

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
16.7 39.69 6.4 0.65748 1.562598 0.251969
Product Image

CEP OS P NB019 - Oil Seal

From £23.62 (£28.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W125

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 39.7 19 1/2 1.562992 0.748031

CEP OS P NB020 - Oil Seal

From £21.26 (£25.51 inc. VAT @ 20%)

Vauxhall Water pump, Triumph pass. Water pump, Standard Water pump, Rootes group Water pump, Morgan Water pump, Massey-Ferguson Water pump, Leyland Water pump, Lea-Francis Water pump, lnternat....

Comparable to other manufacturer part numbers - W126

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 42.8625 19.05 5/8 1 11/16 3/4 (WPD)
Fits Makes:
Vauxhall Water pump, Triumph pass. Water pump, Standard Water pump, Rootes group Water pump, Morgan Water pump, Massey-Ferguson Water pump, Leyland Water pump, Lea-Francis Water pump, lnternat. tractor Water pump, B.M.C. group Water pump, Bedford Water pump

CEP OS P NB021 - Oil Seal

From £22.44 (£26.93 inc. VAT @ 20%)

Rootes group Water pump, Perkins eng. Water pump, Ford group Water pump, Fiat Water pump, David Brown Water pump, B.M.C. group Water pump, Bedford Water pump, Beardmore Water pump, Armstrong Sidd....

Comparable to other manufacturer part numbers - W127, 5330998092352

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 39.6875 16.66875 1/2 1 9/16 21/32 (WPD)
Fits Makes:
Rootes group Water pump, Perkins eng. Water pump, Ford group Water pump, Fiat Water pump, David Brown Water pump, B.M.C. group Water pump, Bedford Water pump, Beardmore Water pump, Armstrong Sidd. Water pump

CEP OS P NB023 - Oil Seal

From £24.99 (£29.99 inc. VAT @ 20%)

Willys Water pump, Rootes group Water pump, Pontiac Water pump, Perkins eng. Water pump, Metropolitan Water pump, Holden Water pump, Ford group Water pump, B.M.C. group Water pump, Beardmore Water...

Comparable to other manufacturer part numbers - W130 E1ADKN-8564

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 42.8625 19.05 5/8 1 11/16 3/4 (WPD)
Fits Makes:
Willys Water pump, Rootes group Water pump, Pontiac Water pump, Perkins eng. Water pump, Metropolitan Water pump, Holden Water pump, Ford group Water pump, B.M.C. group Water pump, Beardmore Water pump

CEP OS P NB024 - Oil Seal

From £22.44 (£26.93 inc. VAT @ 20%)

Turner Water pump, Leyland Water pump, Jowett Water pump, Guy Water pump, Albion Water pump, A.E.C. Water pump

Comparable to other manufacturer part numbers - W131

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 42.8625 18.25625 5/8 1 11/16 23/32 (WPD)
Fits Makes:
Turner Water pump, Leyland Water pump, Jowett Water pump, Guy Water pump, Albion Water pump, A.E.C. Water pump

CEP OS P NB026 - Oil Seal

From £22.44 (£26.93 inc. VAT @ 20%)

Perkins eng. Water pump, Massey-Ferguson Water pump, Leyland Water pump, Dodge truck Water pump, B.M.C. group Water pump, Bedford Water pump, Albion Water pump

Comparable to other manufacturer part numbers - W141

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19.05 46.0375 19.05 3/4 1 13/16 3/4 (WPD)
Fits Makes:
Perkins eng. Water pump, Massey-Ferguson Water pump, Leyland Water pump, Dodge truck Water pump, B.M.C. group Water pump, Bedford Water pump, Albion Water pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB027 - Oil Seal

From £21.26 (£25.51 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W143

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
19 38.1 19 0.748031 1 1/2 0.748031
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB031 - Oil Seal

From £23.62 (£28.34 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - W152

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
14.4 39.25 16.75 0.566929 1.545276 0.659449

CEP OS P NB032 - Oil Seal

From £23.62 (£28.34 inc. VAT @ 20%)

Ford Water pump, B.M.C. group Water pump

Comparable to other manufacturer part numbers - W153

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 42.8625 19.05 5/8 1 11/16 3/4 (WPD)
Fits Makes:
Ford Water pump, B.M.C. group Water pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB037 - Oil Seal

From £21.26 (£25.51 inc. VAT @ 20%)

B.M.C. Water pump

Comparable to other manufacturer part numbers - W158

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 36.4998 16.4084 5/8 1.437 0.646 M/B/R/Carbon
Fits Makes:
B.M.C. Water pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB039 - Oil Seal

From £21.26 (£25.51 inc. VAT @ 20%)

Hillman Water pump, Ford Water pump

Comparable to other manufacturer part numbers - W160

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
12.7 38.4048 16.66875 1/2 1.512 21/32 M/B/R/Carbon
Fits Makes:
Hillman Water pump, Ford Water pump
Product Image

CEP OS P NB041 - Ford Pinion Oil Seal

From £32.40 (£38.88 inc. VAT @ 20%)

Ford Pinion Oil Seal for Consul, Zephyr and Zodiac Mk1 1951 - Feb 1956

Comparable to other manufacturer part numbers - X124

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
34.9 71.5 16.7 1.374016 2.814961 0.65748
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB045 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - X133

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
152 162 4.5 5.984252 6.377953 0.177165
Product Image

CEP OS P NB048 - Oil Seal

From £18.90 (£22.68 inc. VAT @ 20%)

Massey-Ferguson Crankshaft

Comparable to other manufacturer part numbers - X145

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
71.4375 96.8375 12.7 2 13/16 3 13/16 1/2 RUBBER(Spec.)
Fits Makes:
Massey-Ferguson Crankshaft
Product Image

CEP OS P NB049 - Oil Seal

From £13.00 (£15.60 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - X150

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
30.1625 45.974 6.35 1 3/16 1.81 1/4 M/R(Spec.)
Fits Makes:
Villiers engine Sev. applic.
Product Image

CEP OS P NB062 - Oil Seal

From £17.71 (£21.25 inc. VAT @ 20%)

Ford-Thames Fuel pump Fordson tractor Fuel pump

Comparable to other manufacturer part numbers - X185

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
13.7 28.65 14.25 0.53937 1.127953 0.561024 M/R (Spec)
Fits Makes:
Ford-Thames Fuel pump Fordson tractor Fuel pump
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB081 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B527

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
31.75 50.8 9.525 1 1/4 2 3/8 M/R(Spec)

CEP OS P NB082 - Oil Seal

From £17.71 (£21.25 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B529, B611

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.575 41.4782 6.35 1 1/8 1.633 1/4 M/R(4B)
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB083 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B611

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.08125 25.6032 5.16/5.54 19/32 1.008 0.20315 M/R(Spec.)
Fits Makes:
B.M.C. Gear selector shaft

CEP OS P NB084 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B615

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
25.4 38.3032 9.525 1 1.508 3/8 M/PY(4B)R/H
Fits Makes:
B. M. C. Gearbox front

CEP OS P NB085 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1048

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.625 66.929 9.525 1 7/8 2.635 3/8 M/Si(4B/DAT)
Fits Makes:
Triumph Timing cover
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB086 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1051

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.5 60.43 12.7 1.751969 2.379134 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB087 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1052

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42 60 9.92 1.653543 2.362205 0.390551

CEP OS P NB089 - Oil Seal

From £37.39 (£44.87 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D212

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
53.975 76.2254 19.05 2 1/8 3.001 3/4 M/F/L(DFL)
Fits Makes:
lnternat. tractor Trans., Case Brake, B.M.C. Gearbox, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB091 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D668

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 85.82 12.7 2.622047 3.37874 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB092 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D669

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
20.6375 95.3516 12.7 13/16 3.754 1/2 M/UStd)
Fits Makes:
Ford Pinion

CEP OS P NB093 - Oil Seal

From £14.17 (£17.00 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D670 M/Si

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
76.2 95.504 9.525 3 8.8817841970013E-16/2 3.76 3/8 M/Si(4B)
Fits Makes:
Triumph Crankshaft, rear, Hillman Crankshaft, rear
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB094 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D671

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
66.6 89.2 12.7 2.622047 3.511811 1/2
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB095 - Oil Seal

From £15.35 (£18.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D672

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.3 83 9.5 2.374016 3.267717 0.374016
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB097 - Oil Seal

From £16.54 (£19.85 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D674

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
63.5 78 11 2 1/2 3.070866 0.433071
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB106 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F234

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
85.72 127.18 15.87 3.374803 5.007087 0.624803

CEP OS P NB107 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - F237

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
114.3 143.0274 12.7 4 1/2 5.631 1/2 M/PY(B/DAT)
Fits Makes:
Seddon Rear hub

CEP OS P NB108 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G170

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
127 162.0774 12.7 5 6.381 1/2 M/PY(B/DAT)
Fits Makes:
Seddon Rear hub(hub reduction)

CEP OS P NB109 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G171

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
133.35 171.6024 12.7 5 1/4 6.756 1/2 M/PY(B)
Fits Makes:
Scammell Rear hub, outer, Leyland Rear hub, outer
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB116 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - B616

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
28.76 47 23.01 1.132283 1.850394 0.905906
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB117 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1054

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
35 58.97 26.19 1.377953 2.321654 1.031102
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB120 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1049

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
39.6875 72.3138 12.7/17.86 1 9/16 2.847 1/2 M/PY(Spec.)
Fits Makes:
Ford Pinion
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB121 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1050

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
33.3 53.25 14.2 1.311024 2.096457 0.559055

CEP OS P NB123 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Rover P6 rear crank oil seal

Comparable to other manufacturer part numbers - E322, EF550, EF 550,

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
88.9 105.0544 9.525 3 1/2 4.136 3/8 M/Si(4B)L/H
Fits Makes:
Rover Crankshaft, rear, Nuffield tractor Crankshaft, rear, Morris Crankshaft, rear, M.G. Crankshaft, rear, Leyland tractor Crankshaft, rear, Austin Crankshaft, rear

CEP OS P NB125 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
65.0875 85.979 9.525 2 9/16 3.385 3/8 M/R(4B)
Fits Makes:
Albion Pinion

CEP OS P NB126 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - D677

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
59.928125 80.137 10.922 2 23/64 3.155 0.43 M/L/L(DC)
Fits Makes:
Rover F. & R. hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB127 - Oil Seal

From £18.68 (£22.42 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - G172

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
116.68125 152.908 12.7 4 19/32 6.02 1/2 M/R(Spec.)
Fits Makes:
Rover Rear hub

CEP OS P NB128 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1055

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.3016 12.7 2 3.004 1/2 M/R(4B)
Fits Makes:
Rover Front axle swivel bearing
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB129 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1056

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
45 72.152 10 1.771654 2.84063 0.393701
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB130 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1057

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
44.45 70 9.525 1 3/4 2.755906 3/8

CEP OS P NB132 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Triumph Timing cover

Comparable to other manufacturer part numbers - D679

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50.8 76.3016 12.7 2 3.004 1/2 M/R(B)
Fits Makes:
Triumph Timing cover

CEP OS P NB134 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

Comparable to other manufacturer part numbers - C1058

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
41.3 57.2 7.9 1.625984 2.251969 0.311024 M/R(B/DAT)
Fits Makes:
Volvo Rear hub, outer

CEP OS P NB146 - Oil Seal

From £3.12 (£3.74 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
7.9375 16.1036 6.985 5/16 0.634 0.275 M/R(4B)
Fits Makes:
Ford Speedo drive
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB277 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 79.5274 7.9375 2 3/8 3.131 5/16 M/R(Spec.)
Fits Makes:
B.M.C. Front hub, inner

CEP OS P NB289 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
72.628125 92.329 12.7 2 55/64 3.635 1/2 M/Si(4B)
Fits Makes:
B.M.C. Crankshaft, rear flywheel housing
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB290 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
60.325 79.4766 10.715625 2 3/8 3.129 27/64 M/L/L(Spec.)
Fits Makes:
B.M.C. Front hub, inner

CEP OS P NB291 - Oil Seal

From £14.96 (£17.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
82.55 98.679 12.7 3 1/4 3.885 1/2 M/Si(4B)
Fits Makes:
M.G. Crankshaft, rear

CEP OS P NB294 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
40 58 8 1.574803 2.283465 0.314961 M/Vi(4B)
Fits Makes:
Simca Timing cover, Chrysler Timing cover

CEP OS P NB295 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
47.2 60.5 6.3 1.858268 2.38189 0.248031 M/PY(4B)
Fits Makes:
Simca Front hub, Chrysler Front hub

CEP OS P NB296 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
29 44 10 1.141732 1.732283 0.393701 M/PY(B)
Fits Makes:
Simca Gearbox, front, Chrysler Gearbox, front

CEP OS P NB297 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
42 68 10 1.653543 2.677165 0.393701 M/Vi(4B/DAT)
Fits Makes:
Simca Diff. pinion, Chrysler Diff. pinion

CEP OS P NB298 - Oil Seal

From £24.92 (£29.90 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
149.225 174.9298 12.7 5 7/8 6.887 1/2 M/R(4B)
Fits Makes:
Leyland Rear hub, Albion Rear hub
Product Image
Photograph for illustrative purposes only - not actual product shown

CEP OS P NB299 - Oil Seal

From £12.46 (£14.95 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
15.875 35.1282 7.94-4.37 5/8 1.383 0.312598 M/R(Spec.)
Fits Makes:
Triumph Water pump spindle, Saab Water pump spindle

CEP OS P NB301 - Oil Seal

From £9.97 (£11.96 inc. VAT @ 20%)

Oil Seal

CEP - Oil Seals and Gaskets - Oil Seals
Metric (mm) Imperial (inches)
Inner Dia. Outer Dia. Width Inner Dia. Outer Dia. Width Material
50 65.25 10 1.968504 2.568898 0.393701 M/R(4B)
Fits Makes:
Saab Front hub, inner