Push button with flange for mounting on to dash, button head approximately 38mm diameter. Mounting flange 53mm x 35mm with two screw hole (hole centres 42mm). Equivalent to Lucas part numbers...
Comparable to other manufacturer part numbers - HP19, 76205
648.61804
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Foot operated dip switch for mounting through floor. Base measures 55mm x 45mm. Overall height 60mm of which switch pillar is 45mm tall, fixing holes 38mm.
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back), black bakelite type finish with plated stalk....
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back). Ivory bakelite type finish with plated stalk....
Small round surface mount toggle on/off switch, 28mm diameter x approx 13mm tall cover. Chrome plated cover (unscrews to get to terminals). Only suitable for 6 volt or 12 volt, maximum rating 3 amp.
595.6264
Vintage Car Parts - Switches - Other Switches & Accessories
A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15 amps.
A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15...
A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15...
A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15...
A neat little toggle switch with an LED in the end of the toggle that lights up when power is turned on. Panel hole 13mm, Please select your LED colour choice from the options below. Rated at 15...
Pull/push switch, long shank suitable for wooden dash, maximum dash thickness 10mm. Fits through 8mm hole. Overall dimensions 58mm long x 30mm at widest point. Two brass terminals with screws....
Large surface mounted 2 way switch, 2 5/8'' (67mm) diameter, three hole fixing. Well finished in black bakelite. Genuine new old stock - Lucas part number 31001.
Comparable to other manufacturer part numbers - 31001, 359701
Indicator switch which mounts to steering column, secured with a band clip that can be removed without leaving any extra holes etc. Body approx 56mm tall x 44mm deep, overall length approx 164mm....
Handbrake light switch equivalent to Lucas part number SMB479. Alternative part number 31893. 1/4" x 28 tpi UNF thread. Normally closed switch, push to break connection. Applications include,...
Comparable to other manufacturer part numbers - 31893, 510267
Useful rotary 4 position (off, side, dip, main) switch with black lever to fit a metal dash (26mm hole) with fixing nut to retain. 6 screw terminals to rear.
Ivory colour - Solenoid starter (spring loaded) switch metal twin screw connectors. 22.5mm hole fixing. Short type for metal dash. Maximum dash thickness 5mm. Supplied complete with plastic lock nut
532.91113
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Battery isolating switch with flange (53mm hole centres) for panel fixing.
Black knob marked 'OFF' with arrow.
Requires 19.5mm hole and two 4mm fixing holes.
Two 10mm Copper studs with brass...
Comparable to other manufacturer part numbers - SSB103,
532.79486
Vintage Car Parts - Electrical Accessories - Battery Cut Off
Starter switch that attaches to the motor case, as Lucas model type ST9, 76439, 764150. Applicable for 6 or 12 volt applications. Ford part reference BE-11450
Comparable to other manufacturer part numbers - 76439, ST9, 764150
Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 17mm. Overall 46mm tall x 26mm wide when fitted. Top cover pulls off to change bulb. No switch in this unit. Black finish...
530.36566
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 10mm. Overall 57mm tall x 25mm wide when fitted. Top cover pulls off to change bulb. Basic switch on stem side. Dull...
528.4052
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch...
Comparable to other manufacturer part numbers - 31967, 31107, 31272, 317051
476.74228
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch...
476.74228
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Brake light switch which connects to linkage with a spring. Electrical contacts 'breaks' on pull, in relaxed position the switch is on. No rubber cover .
Compact two position switch suitable for dash mounting. A quality reproduction switch equivalent to Lucas part number 9RW (380417) originally offered with a plain black cover (or with a cover...
Comparable to other manufacturer part numbers - 380417, 31291, 31704
Floor mounted traditional dip switch for foot use, equivalent to Lucas part number 31284 (model FS22-1). Base plate measures 75mm x 40mm with 60mm hole centre fixing screws, three terminals with...
Comparable to other manufacturer part numbers - SPB296, 31284, FS22/1
Ignition switch - panel mount with two keys. Requires 19mm diameter hole. 2 key positions - OFF/ON only. Equivalent part to Lucas part number 54316731 (lock and key) and 30608 (switch body)
Comparable to other manufacturer part numbers - 54316731, 30608
Brake light switch, terminals protected by a rubber cover, connects to linkage with a spring, switch 30mm long x 33mm wide x 30mm tall with fixing hole centres 24mm, spring length including hook...
Combined key on/off and off/side/head lamp switch, equivalent to the original Lucas PLC5 type switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are...
Comparable to other manufacturer part numbers - PLC5, 34057, 34080
Switch as Lucas PPG1 style light switch with pull/twist/pull action. Fits through 10mm hole max panel thickness 3mm with chrome retaining nut, hexagon shaft with spring loaded locating pin, three...
Comparable to other manufacturer part numbers - PPG1, 31126, 3H3098
458.60773
Vintage Car Parts - Switches - Other Switches & Accessories
Pull on / push off switch (equivalent to Lucas part number SPB104). Long shank (18mm long, 9mm diameter,) suitable for wooden dash. Black plastic knob on hexagonal stem. Knob removed by depressing...
Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for fog lights, wiper motors or any universal use.
Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for indicator, fog lights, wiper motors etc. Universal use.
Floor mount starter switch for connecting directly into starter/battery cables, four mounting holes, two 5/16" terminals studs with nuts, as Lucas model ST18, 76427. Flange overall diameter...
Comparable to other manufacturer part numbers - SRB311, 76427, ST18
Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
Interior light toggle switch with pressed polished stainless steel or brass cover plate 43mm x 30mm with bevel edges. On/off only. 24mm between hole centres. Please note that the connection...
PLC6 type combined key on/off and off/side/head lamp switch. Approx 56mm diameter (requires 53mm hole in metal dash panel). The off/side/head positions are displayed on a white background through...
Comparable to other manufacturer part numbers - 34055, 34002, 34014, 34018, 34026, 34035, 34075
Battery master isolator switch for dashboard mounting etc equivalent to Lucas ST330, 76605. Mounting flange (53mm hole centres). The body is 43mm in diameter. The knob is marked with 'OFF' and...
Comparable to other manufacturer part numbers - 76605, ST330
455.64795
Vintage Car Parts - Electrical Accessories - Battery Cut Off
White surface mounting trafficator indicator switch with integral flasher unit. New old stock by Starlite, with three terminals marked IG, R and L. Requires separate warning light, supplied with...
Illuminated steering column-mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back). Ivory bakelite type finish with...
Steering column mounted indicator/trafficator switch. Secures around steering column using metal band clip. Base measures 30mm deep (front to back), black bakelite type finish with plated stalk,...
Sturdy panel mounted battery master isolator switch, similar to Lucas ST360 (SSB106) model. Requires 19mm hole in panel. A well-made reproduction part.At 12 volts rated for 100 Amps continuous.Fit...
Comparable to other manufacturer part numbers - ST360, SSB106
454.91943
Vintage Car Parts - Electrical Accessories - Battery Cut Off
As Lucas pattern 51C 'pull on' brake switch, metal body 63mm wide x 35mm deep x 40mm tall with 51mm fixing hole centres, Flange mounted, brass screw terminals on top. Ford part reference Y-13480.
Comparable to other manufacturer part numbers - 51C, 54C, 31281, 35596
Rotary on-off turn switch with black knob with two flattened grips. Short shank for metal dash. Requires 19mm panel hole, bezel 22mm diameter. Black knob with chrome bezel. Equivalent to Lucas...
Comparable to other manufacturer part numbers - 31356, PS6, S50
12 volt remote starter button. Mount under the bonnet for ease of starting the engine whilst you're working on the car. Equivalent to Lucas part numbers SRB316, 2ST. For spare rubber button cover...
Comparable to other manufacturer part numbers - 76464, 76465, BCA4501, SRB316
452.4359
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Relays & Solenoids
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
450.2649
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
450.2649
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
450.2649
Vintage Car Parts - Lamps - Dashboard & Interior Lights
HP19/SPB160 horn push button engraved 'Klaxon'. Flanged for mounting on to dash. Button head approx. 38mm diameter. Mounting flange 53mm x 35mm with two screw holes.
449.61145
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Repair kit for black SPB 120 switches - black Bakelite switch base with brass terminal connections, three piece brass sprung roller contact assembly, black Bakelite screw down bezel with red lens...
Remanufactured switch equivalent to the Lucas 56SA type. Pull on switch with red illuminated knob, fitted with 12 volt bulb. Fits through 3/8" (10mm) panel hole on metal dash. Two push in...
Comparable to other manufacturer part numbers - 31696
Remanufactured part equivalent to Lucas 31311, SPB120 panel mount indicator switch. Domed raised switch body assembly with moulded lever in black bakelite. Black, flat oval base mount (40mm high x...
Comparable to other manufacturer part numbers - 310601, 31311, SPB120
Bulkhead fitting pull type starter switch (945), as Lucas model type ST19/2, applicable for 6 or 12 volt application, metal case with PVC terminal block. Terminals for heavy cables. A lower cost...
Remanufactured part equivalent to Lucas 31476, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in ivory bakelite. Black, flat oval base mount (40mm high...
Comparable to other manufacturer part numbers - SD84, 31476, SPB120, 3H2161
Remanufactured part equivalent to Lucas 31190D, SPB120 panel mounted indicator switch. Domed raised switch body assembly with moulded lever in brown bakelite. Black, flat oval base mount (40mm...
Comparable to other manufacturer part numbers - SD84, SPB120, 31190, B1703
Ignition switch equivalent to Lucas type 34680. Panel mounted with 4 key positions - Auxiliary (left), Off, Ignition and Start. 6.3mm Lucar type spade connections. Supplied with two keys. 35mm...
Comparable to other manufacturer part numbers - 47SA, 34680
Reproduction part equivalent to Lucas TS82 panel and column mounted rotary 3-way indicator/Trafficator switch. Alternative Lucas number 31611 (also 31379 is the same switch body just with a longer...
Comparable to other manufacturer part numbers - 31611
Battery master switch for dashboard mounting etc. Mounting flange (53mm hole centres). 'Flambeau' emblem on knob, also marked with 'OFF' and arrow.
Suitable for 6v, 12v or 24 volt. The knob can...
Comparable to other manufacturer part numbers - 76605, ST330
361.1797
Vintage Car Parts - Electrical Accessories - Battery Cut Off
Surface mounted switch equivalent to Lucas type SPB140 (model HD77). Base 50mm diameter, two bolt mounting through back (35mm hole centres). Side dip switch (lever 18mm long), front horn push...
Comparable to other manufacturer part numbers - 31262, SPB140, HD77
360.7918
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Pull on / push off switch, long threaded shank (16mm long, 9mm diameter) suitable for mounting through wooden dash. Overall length 73mm, maximum diameter 18mm, requires 9.5mm panel hole. Grub...
Comparable to other manufacturer part numbers - PS7, 031218, 314027
Flat blade steel ignition key for the PLC2 switch used on Austin 7 and Morris 8 etc. Overall dimensions 32mm long x 19mmm wide, square tab 8mm deep x 7mm wide. 8mm hole in fob.
Floor mounted starter switch as Lucas ST18 (076411, also SRB312). Heavy pattern for connecting into starter/battery cables. Alternate part number reference 54033241. Supplied with machined...
Comparable to other manufacturer part numbers - 17H5260, SRB312, 76438, RTC4827, 076411, ST18
Push button (spring loaded) black knob, 22mm diameter chromium bezel, long type for wooden dash, maximum dash thickness 20mm. Requires 19mm hole. Makes contact when pushed. Screw terminal...
Comparable to other manufacturer part numbers - 31363
Bulkhead fitting pull type starter switch (945), Lucas model type ST19/2, 76423 applicable for 6 or 12 volt application, all metal body with rubber shielded terminals for heavy cables. Ford part...
Comparable to other manufacturer part numbers - 76701, 76423
Black coated steel base plate 40mm in diameter with 23mm internal diameter. Four M3 threaded holes - two for attaching the TS82 switch to the plate and two for fitting the plate to a surface with...
Black coated steel base plate 40mm in diameter with 23mm internal diameter. Two vertical locating tabs with threaded holes for locating the mounting plate into the body of the Lucas S58 column...
Original lucas trafficator switch screw down bezel/cover and lens, as fitted to the SD84 dash/panel switch. Ivory screw cover with red warning lens and washer to keep bulb from making contact with...
Hazard flasher warning switch kit (12v only). Switch with illuminated knob and flasher unit mounted onto a small bracket with cover for mounting underneath the dash or steering column, which wires...
Comparable to other manufacturer part numbers - SFB300, 30269, C28520, 563361
96.61347
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
86.696335
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
86.696335
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
86.696335
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
86.696335
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Brass Y fitting, used when fitting oil pressure gauge with an oil pressure switch, two 1/8" BSP female threads and one 1/8" BSP male thread, all parallel.
85.61823
Vintage Car Parts - Gauges & Instruments - Pressure Switches, Gauge Cocks & Adaptors
Windscreen washer accessory kit – two black double/twin washer jets, a tee piece, a straight connector, 1.8m plastic tube, a wiring loom, push switch, clips for the tube, a bracket, bolts...
72.70276
Vintage Car Parts - Windscreen and Wipers - Washer & Wiper System Sundries
12 volt Liliput Edison screw LES (E5) base 1.5 watt bulb. Dimensions 5.5mm wide x 16mm tall with 5mm diameter cap, as used in our 154G indicator switch (warning light on the end of the stalk).
Comparable to other manufacturer part numbers - LLB280, BLB280, HB280, R280, 12926
72.06263
Vintage Car Parts - Bulb Holders, Traditional Bulbs & LEDs - Side, Instrument & Panel
Clockwork panel mounted flasher unit/indicator switch (suitable for 6, 12 or 24 volt systems), makes and breaks contacts for approximately 20-25 seconds then self cancels. Body size approximately...
65.855835
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
57.45811
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
57.45811
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
57.45811
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
57.45811
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
57.45811
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
56.67095
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
56.67095
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
56.67095
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...
56.67095
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Bracket mount type dash or panel lamp. Mounting plate 23mm x 65mm (can be cut smaller) with lamp fitted. Stainless steel cover (pulls off to change bulb) and basic switch. Applications include...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
As Lucas type DF41 lamp, chromium cowl with 'King of the Road' emblem stamped on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. Basic...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light...
55.93869
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Aluminium body with black push button, two terminals, for wooden dash. This button is very similar to the vintage Bosch model but has a clip-on cover in place of the early threaded design. 1 3/8''...
55.760452
Vintage Car Parts - Electrical Accessories - Horns, Buzzers & Horn Pushes
Lucas CWX type wiper motor spindle. Made from brass. 165mm long, 5mm diameter, 6mm long threaded section at one end, three cross holes 1.5mm diameter at 20mm, 34mm and 88mm from the threaded...
51.47934
Vintage Car Parts - Windscreen and Wipers - Washer & Wiper System Sundries
We offer replacement keys, cut for door and ignition switch. These are cut to number only, 2 keys are supplied. Supply is restricted to the following key series - key sequence numbers MRN1 through...
Re-manufactured period windscreen demister equivalent to the 'Brooks Standard Model' which fixes to the inside of the glass with two suction pads. The electrical element heats the air which rises...
47.459393
Vintage Car Parts - Electrical Accessories - Aerials, Demisters, Lighters, Sockets etc.
Re-manufactured period windscreen demister equivalent to the 'Brooks Standard Model' which fixes to the inside of the glass with two suction pads. The electrical element heats the air which rises...
47.459393
Vintage Car Parts - Electrical Accessories - Aerials, Demisters, Lighters, Sockets etc.
Re-manufactured period windscreen demister equivalent to the 'Brooks Standard Model' which fixes to the inside of the glass with two suction pads. The electrical element heats the air which rises...
47.459393
Vintage Car Parts - Electrical Accessories - Aerials, Demisters, Lighters, Sockets etc.
As Lucas type DF41 lamp, chromium cowl with 'Toby' medallion on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, centre hole size required 18mm, supplied with cable...
45.312447
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Practical modern wiper motor for continual use. 6 volt. Polished stainless steel cover, will 'auto-park' to one side. Central drive offtake (6mm), requires 8.7mm shaft hole through screen, with...
38.80724
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Practical modern wiper motor for continual use. 12 volt. Polished stainless steel cover, will 'auto-park' to one side. Central drive offtake (6mm), requires 8.7mm shaft hole through screen, with...
38.28112
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Push in cable electrical terminal as used by Lucas in rolled end terminals on lamps and switches etc. Bared cable is pushed through the hollow middle and then pulled back over the outside before...
37.575672
Vintage Car Parts - Cable & Wiring Components - Terminals
Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
37.24742
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
37.24742
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
37.24742
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8" NPTF female ports....
36.20328
Vintage Car Parts - Fuel System Components - Fuel Pumps
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8NPTF female ports....
36.20328
Vintage Car Parts - Fuel System Components - Fuel Pumps
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8NPTF female ports....
36.20328
Vintage Car Parts - Fuel System Components - Fuel Pumps
Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
28.687983
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
28.687983
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
28.687983
Vintage Car Parts - Windscreen and Wipers - Wiper Motors
High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
20.227184
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
20.227184
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
20.227184
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
20.227184
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
High performance LED flasher unit/relay designed for vintage and classic applications including different types of bulb/LED. 3 pin with Earth wire. A very flexible flasher unit that is ideal for...
20.227184
Vintage Car Parts - Electrical Accessories - Relays, Solenoids & Flasher Units - Flasher Units
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Comparable to other manufacturer part numbers - D5, D5FC
19.875275
Vintage Car Parts - Lamps - Dashboard & Interior Lights
Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this...
Comparable to other manufacturer part numbers - D5, D5FB
19.875275
Vintage Car Parts - Lamps - Dashboard & Interior Lights
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
We have superb Montaut motoring art re-prints which are exclusive to Vintage Supplies and the Complete Automobilist. These prints were commissioned from originals some years ago and offer a superb...
19.875275
Vintage Car Parts - Accessories - Vintage Motoring Prints
