229 search results found for ""

CA918 - Aluminium sheet - ribbed pattern

From £284.42 (£341.30 inc. VAT @ 20%)

Ribbed aluminium sheet with approx 8 rib per 25mm. Sheet size 2000mm x 1000mm with the ribs running the full length of the sheet. Ribbed on both sides, thickness 1.4mm.
We can offer either a full...

CA918 - Aluminium sheet - ribbed pattern - aluminium sheet - ribbed pattern

From £284.42 (£341.30 inc. VAT @ 20%)

Ribbed aluminium sheet with approx 8 rib per 25mm. Sheet size 2000mm x 1000mm with the ribs running the full length of the sheet. Ribbed on both sides, thickness 1.4mm.
We can offer either a full...

1000 - radiator temperature meter

From £137.42 (£164.90 inc. VAT @ 20%)

temperature thermometer to fit through radiator cap. choice of chrome or nickel finish (on brass body). head 75mm diameter x 20mm thick with thermometer on a green background marked Hot, Cold and...

836C - PLC2, 5 & 6 ignition/light switch retaining clip

From £8.17 (£9.80 inc. VAT @ 20%)

PLC switch wire retaining clip. Fits all Lucas PLC2, PLC5 and PLC6 (our 836 and 836A) switches. Overall dimensions 45mm x 55mm, 1.5mm thick wire.

CA1266C - 'Duolamp' rear lamp - Red reflective single glass lens, NO side lens

From £47.39 (£56.87 inc. VAT @ 20%)

Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm...

455D - Interior lamp - 120mm diameter chrome rim

From £60.86 (£73.03 inc. VAT @ 20%)

Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...

455D-ns - Interior lamp - 120mm diameter chrome rim - Without switch

From £60.86 (£73.03 inc. VAT @ 20%)

Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...

318341 - Spade ignition key - For PLC2 switch, Austin 7, Morris 8 etc.

From £2.43 (£2.92 inc. VAT @ 20%)

Flat blade steel ignition key for the PLC2 switch used on Austin 7 and Morris 8 etc. Overall dimensions 32mm long x 19mmm wide, square tab 8mm deep x 7mm wide. 8mm hole in fob.

CA412 - Caution 'Keep Off My Tail' sign

From £37.25 (£44.70 inc. VAT @ 20%)

Cast aluminium triangular " keep off my tail caution" sign , red background with raised aluminium letters. a nice period accessory, this part requires holes drilled for fixing. size 125mm tall x...

298S - Andre Hartford shock absorber - Model 298S

From £246.59 (£295.91 inc. VAT @ 20%)

Andre Hartford shock absorber model 298, powder coated, ready to fit. One blade into two blades at friction end with two wooden discs 3-1/2" (89mm) diameter, rolled edges, early type star spring...

298M - Andre Hartford shock absorber - Model 298M

From £279.31 (£335.17 inc. VAT @ 20%)

Andre Hartford shock absorber model 298, powder coated, ready to fit. Two blade into three blades at friction end with four wooden discs 3-1/2" (89mm) diameter, rolled edges, early type star...

ELBOW - Brass elbow

From £14.08 (£16.90 inc. VAT @ 20%)

Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...

ELBOW-1/8BSP - Brass elbow - 1/8" BSP

From £14.08 (£16.90 inc. VAT @ 20%)

Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...

ELBOW-1/4BSP - Brass elbow - 1/4" BSP

From £15.98 (£19.18 inc. VAT @ 20%)

Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...

ELBOW-3/8BSP - Brass elbow - 3/8" BSP

From £19.74 (£23.69 inc. VAT @ 20%)

Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...

ELBOW-1/2BSP - Brass elbow - 1/2" BSP

From £23.57 (£28.28 inc. VAT @ 20%)

Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...

DEU - Equal ended union - Male BSP

From £4.00 (£4.80 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

UNION-1/8BSP-LHB - Equal ended union - Male BSP - 1/8" BSP - Large Hex (14mm accross flats)

From £4.95 (£5.94 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

UNION-1/8BSP-SHB - Equal ended union - Male BSP - 1/8" BSP - Small Hex (12mm accross flats)

From £4.00 (£4.80 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

UNION-1/4BSP - Equal ended union - Male BSP - 1/4" BSP

From £4.75 (£5.70 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

UNION-3/8BSP - Equal ended union - Male BSP - 3/8" BSP

From £6.01 (£7.21 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

UNION-1/2BSP - Equal ended union - Male BSP - 1/2" BSP

From £8.47 (£10.16 inc. VAT @ 20%)

Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...

TEE - Solder nut type equal tee pieces

From £18.57 (£22.28 inc. VAT @ 20%)

Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...

TEE-1/8BSP - Solder nut type equal tee pieces - 1/8" BSP female

From £18.57 (£22.28 inc. VAT @ 20%)

Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...

TEE-1/4BSP - Solder nut type equal tee pieces - 1/4" BSP female

From £20.04 (£24.05 inc. VAT @ 20%)

Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...

TEE-3/8BSP - Solder nut type equal tee pieces - 3/8" BSP female

From £23.87 (£28.64 inc. VAT @ 20%)

Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...

TEE-1/2BSP - Solder nut type equal tee pieces - 1/2" BSP female

From £27.35 (£32.82 inc. VAT @ 20%)

Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...

RM58 - Rubber extrusion - Solid wedge, 11mm x 5.6 to 1.6mm taper

From £7.67 (£9.20 inc. VAT @ 20%)

Wedge shaped black silicone rubber, applications include Austin Sheerline quarterlight seal. 11mm long, 5.6mm wide at thick end, 1.6mm wide at thin end.

CA1159-OV-S - GB oval plaque (bottom mount)

From £55.87 (£67.04 inc. VAT @ 20%)

Black stove enamelled oval plate (190mm x 105mm) with chrome on brass GB letters (84mm tall) fixed with brass nuts, with two oval slots 12mm x 5mm for mounting, designed to be fitted on to a...

696 - Badge bar clip 3/4" (19mm)

From £5.01 (£6.01 inc. VAT @ 20%)

696S - Badge bar clip 3/4" (19mm) - Stainless Steel - Plain

From £5.01 (£6.01 inc. VAT @ 20%)

Stainless steel badge bar clip, two bolt fixing for standard 19mm round bar.

696 - Badge bar clip 3/4" (19mm) - Chrome on Brass - 'Desmo' Stamped

From £11.06 (£13.27 inc. VAT @ 20%)

Chrome on brass badge bar clip, two bolt fixing for standard 19mm round bar. Stamped DESMO ENGLAND

WCX600 - WCX600 suppressed spark plug cap

From £8.38 (£10.06 inc. VAT @ 20%)

WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.

WCX600-CHAMP - WCX600 suppressed spark plug cap - Champion type

From £8.38 (£10.06 inc. VAT @ 20%)

WCX600 spark plug suppressed terminals, embossed 'CHAMPION', 90 degree angle (side entry) cable which screws on to ignition wire, black.

CA1159-OV-H - GB oval plaque (top mount)

From £55.87 (£67.04 inc. VAT @ 20%)

Black stove enamelled oval plate (190mm x 105mm) with chrome on brass GB letters (84mm tall) fixed with brass nuts, with two oval slots 12mm x 5mm for mounting,

CA1177S - Toby diver's helmet SMALL rear lamp - (PAIR) Similar to the old CAV, Rotax and Lucas models.

From £771.93 (£926.32 inc. VAT @ 20%)

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....

CA1177S-PB - Toby diver's helmet SMALL rear lamp - (PAIR) Similar to the old CAV, Rotax and Lucas models. - Polished brass

From £771.93 (£926.32 inc. VAT @ 20%)

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....

CA1177S-N - Toby diver's helmet SMALL rear lamp - (PAIR) Similar to the old CAV, Rotax and Lucas models. - Nickel

From £771.93 (£926.32 inc. VAT @ 20%)

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models....

527 - Draught excluder - Snap on, plush moquette cover and 10mm bead

From £0.00 (£0.00 inc. VAT @ 20%)

Snap-on draught excluder, plush moquette covered with draught excluder rubber bead approximately 10mm diameter attached.

527-Blue - Draught excluder - Snap on, plush moquette cover and 10mm bead - Blue draught excluder

From £11.93 (£14.32 inc. VAT @ 20%)

Snap-on draught excluder, plush moquette covered with draught excluder rubber bead approximately 10mm diameter attached.

527-Green - Draught excluder - Snap on, plush moquette cover and 10mm bead - Green draught excluder

From £11.93 (£14.32 inc. VAT @ 20%)

Snap-on draught excluder, plush moquette covered with draught excluder rubber bead approximately 10mm diameter attached.

526-Chrome - Wood screw - CHROME countersunk/raised head/slotted, 16mm x 6 gauge

From £3.32 (£3.98 inc. VAT @ 20%)

Pack of ten chrome on brass countersunk/raised head wood screw - 16mm x 6 gauge

302S-A - Andre Hartford shock absorber - Model 302S

From £281.18 (£337.42 inc. VAT @ 20%)

Andre Hartford shock absorber model 302S, powder coated, ready to fit. One blade into two blades at friction end 4" (100mm) diameter, rolled edges, early type double star springs on the front with...

CA1454 - ENOTS hose clip/hose clamp - For 19mm to 60mm diameter

From £20.50 (£24.60 inc. VAT @ 20%)

Vintage period brass hose clip with tightening screw. Please note that these are made to specific sizes (to be specified by the customer). The minimum size we can offer is 19mm, the maximum is...

CA1177 LENS AMB GLASS - Divers helmet rear light - amber lens glass

From £18.25 (£21.90 inc. VAT @ 20%)

Glass lens in golden amber for divers lamp. Used in our CA1177. 53mm diameter stained glass

CA1177 LENS RED GLASS - Divers helmet rear light - red lens glass

From £18.25 (£21.90 inc. VAT @ 20%)

Glass lens in red for divers lamp. Used in our CA1177. 53mm diameter stained glass

CA1177 LENS CLR GLASS - Divers helmet rear light - clear lens glass

From £12.96 (£15.55 inc. VAT @ 20%)

Glass lens in clear for divers lamp. Used in our CA1177. 53mm diameter stained glass

369 - Banjo union - 3/8" BSP thread bolt, solder socket for 3/8" OD pipe

From £36.76 (£44.11 inc. VAT @ 20%)

Solder type banjo union supplied complete with 3/8" BSP bolt and washers. The 3/8" copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...

506S-Tele - Andre Hydro shock absorber - Model 506S Telecontrol

From £353.50 (£424.20 inc. VAT @ 20%)

Suitable for the medium size vehicle of approx 1500kg weight. Enamel finish, ready to fit. External round pressure bag fitted under Hydro dial with copper pipe connection fitted, one blade into...

506M-Tele - Andre Hydro shock absorber - Model 506M Telecontrol

From £425.00 (£510.00 inc. VAT @ 20%)

Suitable for the medium size vehicles of approx 2000kg or competition vehicles. Enamel finish, ready to fit. to fit. External round pressure bag fitted under Hydro dial with copper pipe connection...

CA812 - 12" Headlamp stone guard PAIR - Flat, chrome or nickel plated

From £274.25 (£329.10 inc. VAT @ 20%)

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA812-N - 12" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Nickel plated finish 12" stoneguard PAIR

From £274.25 (£329.10 inc. VAT @ 20%)

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA812-C - 12" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Chrome plated finish 12" stoneguard PAIR

From £274.25 (£329.10 inc. VAT @ 20%)

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA810 - 10" Headlamp stone guard PAIR - Flat, chrome or nickel plated

From £256.38 (£307.66 inc. VAT @ 20%)

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA810-N - 10" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Nickel plated finish 10" stoneguard PAIR

From £256.38 (£307.66 inc. VAT @ 20%)

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA810-C - 10" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Chrome plated finish 10" stoneguard PAIR

From £256.38 (£307.66 inc. VAT @ 20%)

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA809 - 9" Headlamp stone guard PAIR - Flat, chrome or nickel plated

From £245.77 (£294.92 inc. VAT @ 20%)

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA809-N - 9" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Nickel plated finish 9" stoneguard PAIR

From £245.77 (£294.92 inc. VAT @ 20%)

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA809-C - 9" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Chrome plated finish 9" stoneguard PAIR

From £245.77 (£294.92 inc. VAT @ 20%)

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome...

CA808 - 8" Headlamp stone guard PAIR - Flat, chrome or nickel plated

From £234.37 (£281.24 inc. VAT @ 20%)

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....

CA808-N - 8" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Nickel plated finish 8" stoneguard PAIR

From £234.37 (£281.24 inc. VAT @ 20%)

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....

CA808-C - 8" Headlamp stone guard PAIR - Flat, chrome or nickel plated - Chrome plated finish 8" stoneguard PAIR

From £234.37 (£281.24 inc. VAT @ 20%)

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....

CA808-MG - 8" Headlamp stone guard PAIR - Flat, chrome or nickel plated - MG type, chrome plated finish 8" stoneguard PAIR

From £281.03 (£337.24 inc. VAT @ 20%)

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled....

CA739 - Flat wiper blade - Hook in type (slot without peg fitting)

From £9.51 (£11.41 inc. VAT @ 20%)

Hook in type wiper blade for flat screen. Polished stainless steel back with crimped rubber wipe. 
Offered in sizes - 7" (175mm), 8" (200mm), 9" (225mm) and 10" (250mm). these can be...

CA739-7 - Flat wiper blade - Hook in type (slot without peg fitting) - 7 inch (175mm)

From £9.51 (£11.41 inc. VAT @ 20%)

Hook in type wiper blade for flat screen. Polished stainless steel back with crimped rubber wipe. 
Offered in sizes - 7" (175mm), 8" (200mm), 9" (225mm) and 10" (250mm). these can be...

CA739-8 - Flat wiper blade - Hook in type (slot without peg fitting) - 8 inch (200mm)

From £9.84 (£11.81 inc. VAT @ 20%)

Hook in type wiper blade for flat screen. Polished stainless steel back with crimped rubber wipe. 
Offered in sizes - 7" (175mm), 8" (200mm), 9" (225mm) and 10" (250mm). these can be...

CA739-9 - Flat wiper blade - Hook in type (slot without peg fitting) - 9 inch (225mm)

From £10.08 (£12.10 inc. VAT @ 20%)

Hook in type wiper blade for flat screen. Polished stainless steel back with crimped rubber wipe. 
Offered in sizes - 7" (175mm), 8" (200mm), 9" (225mm) and 10" (250mm). these can be...

CA739-10 - Flat wiper blade - Hook in type (slot without peg fitting) - 10 inch (250mm)

From £10.32 (£12.38 inc. VAT @ 20%)

Hook in type wiper blade for flat screen. Polished stainless steel back with crimped rubber wipe. 
Offered in sizes - 7" (175mm), 8" (200mm), 9" (225mm) and 10" (250mm). these can be...

721 - Ross courtney wiring terminal

From £8.66 (£10.39 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

721A - Ross courtney wiring terminal - 4BA hole 1.00mm wire

From £8.66 (£10.39 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

721B - Ross courtney wiring terminal - 3BA hole 2.00mm wire

From £8.67 (£10.40 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

721C - Ross courtney wiring terminal - 2BA hole 2.00mm wire

From £9.44 (£11.33 inc. VAT @ 20%)

Ross courtney type wire end terminal (post terminal), pronged cup and washer two part terminal in self colour brass. A stripped wire is laid into the pronged cup with the flat washer put on top,...

900JAG - Cast GB plate with Jaguar

From £33.43 (£40.12 inc. VAT @ 20%)

Oval cast GB plaque with Jaguar cat, with raised letters and rim, supplied unpainted, nice vintage pattern size 145mm x 105mm. Supplied undrilled for any fixing.

900DAIM - Cast GB plate with Daimler

From £35.83 (£43.00 inc. VAT @ 20%)

Oval cast GB plaque with Daimler mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 145mm x 105mm. Supplied undrilled for any fixing.

900BUL - Cast GB plate with Morris Bullnose Radiator

From £35.83 (£43.00 inc. VAT @ 20%)

Oval cast GB plaque with Morris Bullnose Radiator inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 132mm. Supplied undrilled for any fixing.

900FLA - Cast GB plate with Morris Flatnose Radiator

From £35.83 (£43.00 inc. VAT @ 20%)

Oval cast GB plaque with Morris Flatnose Radiator inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 132mm. Supplied undrilled for any fixing.

239F-C - Calormeter wings - high - chrome

From £65.41 (£78.49 inc. VAT @ 20%)

Chrome period high pattern wings (approx 150mm wide) to fit under the Boyce meter to enhance the radiator cap.

RM62 - Rubber extrusion - Hollow 'T' section, 19mm wide

From £6.95 (£8.34 inc. VAT @ 20%)

Black rubber hollow body T-section extrusion, as per illustration. Dimensions 19mm long, 6.8mm thick, reducing to 3.5mm at 'T' with 1mm tongue on the front edge.

239A-C - Motometer/Calormeter wings - Small, chrome

From £55.19 (£66.23 inc. VAT @ 20%)

Chrome period small wings - President - (approx 90mm wide) to fit under the calor/motormeter to enhance the radiator cap.

239B-N - Motometer/Calormeter wings - Raised curved wings, nickel

From £65.00 (£78.00 inc. VAT @ 20%)

Nickel period wings (approx 137mm wide) to fit under the calor/motometer to enhance the radiator

239C-N - Motometer/Calormeter wings - Small raised wings, nickel

From £58.89 (£70.67 inc. VAT @ 20%)

Nickel period wings - Speed - (approx 128mm wide) to fit under the calor/motometer to enhance the radiator cap.

698-2-H - Oval country code plaque (top mount)

From £76.02 (£91.22 inc. VAT @ 20%)

Black stove enamelled oval plate (240mm x 140mm ) for double digit vehicle country codes with two chrome on brass letters (88mm tall), we offer a limited range the letters to select from, A, B,...

698-2-S - Oval country code plaque (bottom mount)

From £76.02 (£91.22 inc. VAT @ 20%)

Black stove enameled oval plate (240mm x 140mm ) for double digit vehicle country codes with two chrome on brass letters (88mm tall), we offer a limited range the letters to select from, A, B, C,...

698-1-H - Oval country code plaque (top mount)

From £51.18 (£61.42 inc. VAT @ 20%)

Black powder coated oval plate (188mm x 110mm ) for single digit vehicle country codes with a chrome on brass letter (88mm tall), we offer a limited range the letters to select from, A, B, C, D,...

698-1-S - Oval country code plaque (bottom mount)

From £51.18 (£61.42 inc. VAT @ 20%)

Black powder coated oval plate (188mm x 110mm ) for single digit vehicle country codes with a chrome on brass letter (88mm tall), we offer a limited range the letters to select from, A, B, C, D,...

943-RH-62mm - Mirror arm - Right hand, 62mm hole centres

From £43.87 (£52.64 inc. VAT @ 20%)

Chrome plated non adjustable cranked right hand mirror arm, base 96mm x 21mm x two 6mm holes with 62mm centres. 7/16" (11mm) rod approx 150mm long. This arm is a one off special, made with 62mm...

868.111 - Bumper iron cover - Base 87mm x 66mm, PAIR

From £29.80 (£35.76 inc. VAT @ 20%)

Moulded rubber parts, internal hole size 35mm OR 38mm - please select you required option below. Base 87mm x 66mm approximately. Supplied as a PAIR

868.111-35mm - Bumper iron cover - Base 87mm x 66mm, PAIR - 35mm bore

From £29.80 (£35.76 inc. VAT @ 20%)

Moulded rubber parts, internal hole size 35mm OR 38mm - please select you required option below. Base 87mm x 66mm approximately. Supplied as a PAIR

868.111-38mm - Bumper iron cover - Base 87mm x 66mm, PAIR - 38mm bore

From £30.95 (£37.14 inc. VAT @ 20%)

Moulded rubber parts, internal hole size 35mm OR 38mm - please select you required option below. Base 87mm x 66mm approximately. Supplied as a PAIR

841RIGHT.ANGLE - Hydraulic grease nipple - 90 degree angle

From £0.00 (£0.00 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-5/16UNF - Hydraulic grease nipple - 90 degree angle - 5/16" UNF

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-1/4UNF - Hydraulic grease nipple - 90 degree angle - 1/4" UNF

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-1/8BSP - Hydraulic grease nipple - 90 degree angle - 1/8" BSP

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-3/8BSF - Hydraulic grease nipple - 90 degree angle - 3/8" BSF

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-1/4BSF - Hydraulic grease nipple - 90 degree angle - 1/4" BSF

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

841right.angle-5/16BSF - Hydraulic grease nipple - 90 degree angle - 5/16" BSF

From £1.69 (£2.03 inc. VAT @ 20%)

Hydraulic grease nipples, 90 degree nipple to thread angle, threads 1/8"BSP, 1/4"BSF, 5/16"BSF, 3/8"BSF, 1/4"UNF, 5/16"UNF. Use with 4 jaw grease gun connectors e.g. 108E and 108D. If you are...

638 - Door check retainer strap - Leather over spring steel flap

From £35.59 (£42.71 inc. VAT @ 20%)

Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour

638-BLK - Door check retainer strap - Leather over spring steel flap - Black

From £35.59 (£42.71 inc. VAT @ 20%)

Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour

Sliding type as fitted to many vehicles. Spring...

638-BRN - Door check retainer strap - Leather over spring steel flap - Brown

From £35.59 (£42.71 inc. VAT @ 20%)

Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour

Sliding type as fitted to many vehicles. Spring...

641 - Headlamp daisy head rim screw - 36mm long

From £18.94 (£22.73 inc. VAT @ 20%)

Daisy head headlamp rim screw for the Lucas L140 & L150 headlamps, overall length 36mm (head 18mm, thread 18mm) head diameter 15mm tapering down to 9mm, with a 2BA thread. Chrome plated brass.

572245 - Lamp base gasket for L471 type lamps

From £6.24 (£7.49 inc. VAT @ 20%)

Replacement rubber base gasket for Lucas L471 type rear lamps

288LS - Clear side lens for 288 (and Lucas L582) type lamps

From £11.96 (£14.35 inc. VAT @ 20%)

Replacement clear plastic sleeve lens for the number plate illumination window in 288 part number series (equivalent to Lucas L582 type) lamps.

918-R - Side lamp LD109 pattern (round base) - Chrome finish

From £67.39 (£80.87 inc. VAT @ 20%)

'Toby' side lamp equivalent to Lucas LD109 type side lamp, approx 51mm diameter x 63mm long, with round base and a 'Toby' 'tell tale' red dot medallion in top, frosted glass lens. Chrome finish....

978F - Rear, fog, indicator or reversing lamp (flush mounting) - Red, Clear & Amber

From £29.63 (£35.56 inc. VAT @ 20%)

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...

978F-A - Rear, fog, indicator or reversing lamp (flush mounting) - Red, Clear & Amber - Amber indicator lamp - Flush mounting, two stud, moulded lens

From £29.63 (£35.56 inc. VAT @ 20%)

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...

978F-C - Rear, fog, indicator or reversing lamp (flush mounting) - Red, Clear & Amber - Clear lens (Reversing)

From £29.63 (£35.56 inc. VAT @ 20%)

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...

978F-R - Rear, fog, indicator or reversing lamp (flush mounting) - Red, Clear & Amber - Red lens (Rear fog/warning)

From £29.63 (£35.56 inc. VAT @ 20%)

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire...

BB24C - Badge bar 24" - 19mm diameter, cranked (with 20mm bend in centre)

From £30.34 (£36.41 inc. VAT @ 20%)

Badge bar 24" long. Twin mounting posts. Chrome posts, stainless steel bar. 20mm centre "V" crank. Total leg length 103mm, bolt size 6mm. 19mm bar diameter

1337-SC - Facet solid state fuel pump - 12 volt - competition

From £79.95 (£95.94 inc. VAT @ 20%)

Solid state fuel pump kit for competition use, delivering fuel at rate of up to 25 gallons per hour at a pressure of 6.0 to 7.0 psi.
Negative earth systems only. Must be fitted within 300mm of...

1337-REG-8 - Petrol King fuel pressure regulator - 8mm tails

From £68.68 (£82.42 inc. VAT @ 20%)

PETROL KING Fuel pressure regulator has been designed to improve carburetor feed. Fuel flow is steady and constant at any weather, ambient and driving conditions, thanks to its wide diaphragm...

CA1026 - Glass bowl fuel filter - In line, 1/4" or 5/16" pipe connections

From £76.07 (£91.28 inc. VAT @ 20%)

Glass bowl in line fuel filter which has the useful provision of being able to be supported by an additional bracket on to the threaded portion if required, to carry the weight. Available for...

CA1026 - Glass bowl fuel filter - In line, 1/2" UNF female or solder nipples for 1/4" or 5/16" OD pipe

From £36.75 (£44.10 inc. VAT @ 20%)

Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket. 
This filter is offered with right or left inlet port (as...

CA1026A - Glass bowl fuel filter - In line, 1/2" UNF female or solder nipples for 1/4" or 5/16" OD pipe - Right inlet - 1/2" UNF female ports

From £36.75 (£44.10 inc. VAT @ 20%)

Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket. 
This filter is offered with right or left inlet port (as...

CA1026B - Glass bowl fuel filter - In line, 1/2" UNF female or solder nipples for 1/4" or 5/16" OD pipe - Left inlet - 1/2" UNF female ports

From £36.75 (£44.10 inc. VAT @ 20%)

Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket. 
This filter is offered with right or left inlet port (as...

CA1026A-BSP - Glass bowl fuel filter - In line, 1/2" UNF female or solder nipples for 1/4" or 5/16" OD pipe - Right inlet - Solder nipples for 1/4" or 5/16" pipe

From £63.15 (£75.78 inc. VAT @ 20%)

Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket. 
This filter is offered with right or left inlet port (as...

CA1026B-BSP - Glass bowl fuel filter - In line, 1/2" UNF female or solder nipples for 1/4" or 5/16" OD pipe - Left inlet - Solder nipples for 1/4" or 5/16" pipe

From £63.15 (£75.78 inc. VAT @ 20%)

Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket. 
This filter is offered with right or left inlet port (as...

985 - In line fuel filter - Glass body, 6, 8 or 10mm ends

From £9.43 (£11.32 inc. VAT @ 20%)

Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...

985A - In line fuel filter - Glass body, 6, 8 or 10mm ends - 6mm push on connection ends

From £9.75 (£11.70 inc. VAT @ 20%)

Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...

985B - In line fuel filter - Glass body, 6, 8 or 10mm ends - 8mm push on connection ends

From £10.37 (£12.44 inc. VAT @ 20%)

Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...

985C - In line fuel filter - Glass body, 6, 8 or 10mm ends - 10mm push on connection ends

From £11.11 (£13.33 inc. VAT @ 20%)

Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...

985F - In line fuel filter - Glass body, 6, 8 or 10mm ends - Replacement filter element for 985A, B & C - Three pack with O-rings

From £9.43 (£11.32 inc. VAT @ 20%)

Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...

334 - SU fuel pump points and blade AUB 6106

From £23.07 (£27.68 inc. VAT @ 20%)

Twin point rocker assembly and blade (points) for SU fuel pumps.

543 - Dash lamp - Vintage pattern, plain top

From £0.00 (£0.00 inc. VAT @ 20%)

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...

543B - Dash lamp - Vintage pattern, plain top - Black and Polished Brass

From £127.26 (£152.71 inc. VAT @ 20%)

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...

543N - Dash lamp - Vintage pattern, plain top - Nickel

From £127.26 (£152.71 inc. VAT @ 20%)

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...

543C - Dash lamp - Vintage pattern, plain top - Chrome

From £127.26 (£152.71 inc. VAT @ 20%)

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a...

CA40 - Dashboard illumination lamp - Horizontal bracket mounted

From £38.42 (£46.10 inc. VAT @ 20%)

Bracket mount type dash or panel lamp. Mounting plate 23mm x 65mm (can be cut smaller) with lamp fitted. Stainless steel cover (pulls off to change bulb) and basic switch. Applications include...

352 - Dashboard illumination lamp - Black, without switch

From £46.58 (£55.90 inc. VAT @ 20%)

Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 17mm. Overall 46mm tall x 26mm wide when fitted. Top cover pulls off to change bulb. No switch in this unit. Black finish...

352A - Dashboard illumination lamp - Dull chrome, with switch

From £49.42 (£59.30 inc. VAT @ 20%)

Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 10mm. Overall 57mm tall x 25mm wide when fitted. Top cover pulls off to change bulb. Basic switch on stem side. Dull...

842 - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel

From £34.00 (£40.80 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842R-12V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - red 12volt

From £34.00 (£40.80 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842A-12V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - amber 12 volt

From £34.00 (£40.80 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842G-12V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - green 12 volt

From £34.00 (£40.80 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842B-12V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - blue 12 volt

From £34.00 (£40.80 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842R-6V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - red 6 volt

From £35.03 (£42.04 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842A-6V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - amber 6 volt

From £35.03 (£42.04 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842G-6V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - green 6 volt

From £35.03 (£42.04 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

842B-6V - Ignition/indicator warning lamp equivalent to Lucas WL3 - Chrome Bezel - blue 6 volt

From £35.03 (£42.04 inc. VAT @ 20%)

Ignition warning lamp equivalent to Lucas WL3 type, chrome (slotted) screw bezel, black plastic body fits through dash (19mm hole). Please note that these lamps may have wire outer windings -...

419 - Panel warning light

From £5.68 (£6.82 inc. VAT @ 20%)

Small panel mount warning lamp with metal rim which unscrews to change bulb. 13.4mm diameter, push fit into a 13.4mm panel hole. twin wires to rear.
order BA7 bulb separately if required

0609 - Chrome rimmed panel warning light

From £5.99 (£7.19 inc. VAT @ 20%)

Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...

0609R - Chrome rimmed panel warning light - Red lens

From £5.99 (£7.19 inc. VAT @ 20%)

Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...

0609G - Chrome rimmed panel warning light - Green lens

From £5.99 (£7.19 inc. VAT @ 20%)

Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...

0609A - Chrome rimmed panel warning light - Amber lens

From £5.99 (£7.19 inc. VAT @ 20%)

Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...

0609B - Chrome rimmed panel warning light - Blue lens

From £5.99 (£7.19 inc. VAT @ 20%)

Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...

297G-IND - Side/Indicator Lamp - Equivalent to Lucas 1130 type, glass lens with chrome rim

From £90.20 (£108.24 inc. VAT @ 20%)

Internally modified torpedo style side lamp, reproduction of the Lucas 1130 type light. Chromium plated body approx 100mm long x 46mm diameter. Frosted glass lens with chrome rim held with screw...

CA1235R - Panel mounted warning light - RED, with alloy rim

From £5.91 (£7.09 inc. VAT @ 20%)

RED dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...

CA1235G - Panel mounted warning light - GREEN, with alloy rim

From £5.91 (£7.09 inc. VAT @ 20%)

GREEN dash or panel warning lamp with aluminium bezel (rim diameter 22mm). Rear body black plastic, fits through 17.5 mm panel hole - maximum 12mm thickness. Thread length 18mm. Secured in place...

CA1246 - 7" diameter chrome headlamp unit (PAIR) - Flat fronted lens, 12V, RHD or LHD

From £115.14 (£138.17 inc. VAT @ 20%)

Freestanding chrome plated headlamp unit fitted with 12 volt light unit providing main beam, dipped beam and sidelight). These lamps measure approx 182mm diameter x 140mm deep overall. Single 12mm...

CLR700 - Base mounted spot lamp - Equivalent to Lucas CLR700 type

From £154.89 (£185.87 inc. VAT @ 20%)

Freestanding long-range beam driving/spot lamp approx 184mm across x approx 90mm deep. Convex plain glass lens with central chrome knob as pattern and style of original Lucas CLR700 lamp. Ford...

786S - Headlamp unit - 5-3/4" (pair)

From £201.61 (£241.93 inc. VAT @ 20%)

Pair of small free standing headlamp unit with single mounting stem bolt, metal bucket back, all chrome, approx 150mm overall diameter. a solid and robust unit which has various applications....

357A - 7" Headlamp bowl - 3 Adjuster type for Lucas pattern 700 series lights

From £41.10 (£49.32 inc. VAT @ 20%)

Metal headlamp bowl for standard 7" Lucas 700 series type light units. Three adjuster version. Supplied with metal back shell, chrome retaining rim holder and adjusters.

P700R - P700 headlight unit (PAIR) - UK/Right Hand Drive

From £63.12 (£75.74 inc. VAT @ 20%)

Replacement part equivalent to Lucas type P700 (7") 'Tripod' bar headlamp reflector unit. RIGHT HAND DRIVE. Offered in PAIRS only (2 pieces).
These light units feature the standard H4 P43T...

357-700 - 7" British Pre-focus headlamp unit, complete with mounting kit - UK/RHD

From £83.15 (£99.78 inc. VAT @ 20%)

British Pre-focus headlamp unit complete with mounting kit. The reflector is equivalent to the Lucas 700 series unit. For Right Hand Drive (dip to left) vehicles. Complete and ready to install...

570P - Pillar mounted spot lamp with HANDLE - As Raydyot HSU495 type

From £158.66 (£190.39 inc. VAT @ 20%)

Reproduction pillar-mounted spot lamp or searchlight. Chrome plate on brass lamp equivalent to original Raydyot HS495 or HSU495 pattern, with adjustable mounting arm and bracket with handle. Lamp...

570M - Pillar mounted spot lamp with MIRROR - As Raydyot HS495 type

From £140.66 (£168.79 inc. VAT @ 20%)

Pillar mounted spotlamp with rear view mirror made to original Raydyot HS495 patten. Chrome on brass. Pillar mounted on adjustable mounting arm and bracket. Lamp 112mm diameter x 93mm deep, mirror...

CA1293A - Indicator lamp with amber lens - Small, stud mounted (40mm x 25mm x 40mm depth)

From £25.81 (£30.97 inc. VAT @ 20%)

Very small chrome warning/indicator lamp with amber lens. (40mm x 25mm x 40mm depth). Please note that this unit accepts MCC BA9S bulbs, most of which do not have the watts available for 21w/42w...

298A - Indicator Lamp - Lucas L488 type

From £29.24 (£35.09 inc. VAT @ 20%)

Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim with amber glass lens (25mm depth from mounting panel). Lucas model L488 with flat lens. Mounts through 35mm panel...

932 - Small Indicator Lamp - Chrome, amber lens

From £21.60 (£25.92 inc. VAT @ 20%)

Small, best selling lamp of modern manufacture particularly suitable for flashing indicator use. Chrome plated body with amber lens. Body approximately 58mm diameter x 70mm long. Single mounting...

993 - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount)

From £11.61 (£13.93 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993R-Glass - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Red rear with glass lens

From £23.37 (£28.04 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993A-Glass - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Amber indicator with glass lens

From £23.37 (£28.04 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993C-Glass - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Clear side with glass lens

From £23.37 (£28.04 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993R - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Red rear with plastic lens

From £11.98 (£14.38 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993A - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Amber indicator with plastic lens

From £11.61 (£13.93 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

993C - Side, Rear or Indicator Lamp equivalent to Lucas 594 (Flush Mount) - Clear side with plastic lens

From £11.98 (£14.38 inc. VAT @ 20%)

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A...

288B-IND - Indicator Lamp equivalent to Lucas type 582 - Black body, amber plastic lens

From £54.80 (£65.76 inc. VAT @ 20%)

Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type L582. Amber plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Black...

297AMB - Indicator Lamp - Equivalent to Lucas 1130 type, amber plastic lens

From £82.89 (£99.47 inc. VAT @ 20%)

Torpedo style side lamp, reproduction of the Lucas 1130 type. Chromium plated body approx 100mm long x 46mm diameter, amber plastic moulded lens.
Double filament bulb holder, mounted by two bolts...

CA1293 - Indicator lamp with amber lens - Large, stud mounted (60mm x 45mm x 52mm depth)

From £28.12 (£33.74 inc. VAT @ 20%)

Free standing chrome body rectangular indicator lamp with amber lens, lens 60mm x 45mm, 52mm deep. Mounting by single 10mm bolt through which wire passes. SBC BA15D bulb base. Fitted with 12 volt...

257-WO - Rubber Indicator Lamp equivalent to Rubbolite No 25 lamp - No side lens

From £61.55 (£73.86 inc. VAT @ 20%)

A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard...

E83W-13550-B - Number plate lamp

From £44.14 (£52.97 inc. VAT @ 20%)

Painted cowl type number plate lamp with glass lens, two bolt mounting with 45mm hole centres, supplied with two cables fitted with terminals ( one bullet, one eyelet. ) and waterproof cable...

708 - Number plate lamp - Equivalent to Lucas L467 type

From £37.65 (£45.18 inc. VAT @ 20%)

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...

708B - Number plate lamp - Equivalent to Lucas L467 type - Black coated steel cover

From £40.85 (£49.02 inc. VAT @ 20%)

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...

708C - Number plate lamp - Equivalent to Lucas L467 type - Chrome plated steel cover

From £37.65 (£45.18 inc. VAT @ 20%)

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres,...

378BRC - BRC lamp plaque

From £16.91 (£20.29 inc. VAT @ 20%)

BRC lamp oval plate - engraved copper. Marked 'B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA'. Measures 59mm x 26mm

422 - Bulb holder single ended, SBC/BA15D double contact

From £23.97 (£28.76 inc. VAT @ 20%)

Single ended, double contact bulb holder. Dimensions thread diameter 19mm, overall length 38mm, flange 28.5mm. Accepts SBC BA15D bulb, rear nut removes to expose terminal contacts.

CA605 - Bulb holder BA15 on mounting plate

From £9.67 (£11.60 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

CA605S - Bulb holder BA15 on mounting plate - Single contact BA15S bulb holder

From £9.71 (£11.65 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

CA605D - Bulb holder BA15 on mounting plate - Double contact BA15D equal pin bulb holder

From £9.67 (£11.60 inc. VAT @ 20%)

Useful bulb holder (BA15) with bracket, (60mm x 16mm) which can be bent as necessary.

153 - Brass Bulb Holder - BA15S, BA15D & BAY15D

From £19.71 (£23.65 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

153s - Brass Bulb Holder - BA15S, BA15D & BAY15D - Single contact parallel pin BA15S

From £21.16 (£25.39 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

153e - Brass Bulb Holder - BA15S, BA15D & BAY15D - Double contact parallel pin BA15D

From £20.76 (£24.91 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

153o - Brass Bulb Holder - BA15S, BA15D & BAY15D - Double contact offset pin BAY15D

From £19.71 (£23.65 inc. VAT @ 20%)

Replacement general purpose bulb holder - accepts 15mm diameter base bulbs. Offered for various bulbs configurations - 1156/SCC/BA15S single contact parallel pin, SBC/BA15D double contact parallel...

424 - Bulbholder for 1130 sidelamp BA15D equal pin double contact

From £24.76 (£29.71 inc. VAT @ 20%)

Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC BA15D parallel pin bulbs. Please note these are made to original pattern. These bulb holders allow conversion...

998 - Gear stick/lever gaiter rubber - 95mm diameter x 28mm high

From £11.95 (£14.34 inc. VAT @ 20%)

Moulded rubber gear stick lever gaiter, 95mm base diameter, approx 12mm top neck bore for lever, 28mm tall.

767G - 'D' lamp BASE gasket for 249/428 (Lucas type ST51) 'D' lamps

From £2.83 (£3.40 inc. VAT @ 20%)

Body to base gasket for Lucas type ST51 'D' Lamps - our part number series, 428, 249 and CA1149

177L - Red plastic lens for Lucas model 288-3 number plate box lamp

From £31.74 (£38.09 inc. VAT @ 20%)

Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box  assembly. Dimensions 95mm wide x 67mm tall.

767S - Replacement red split lens for 249A/428A (and Lucas ST51) type 'D' lamps

From £18.08 (£21.70 inc. VAT @ 20%)

Replacement red split glass lens for ST51 type 'D' lamps, our part numbers 249A and 428A

177 - Chrome 'D' rim kit for lenses on the Lucas 288-3 model number plate box lamp

From £73.74 (£88.49 inc. VAT @ 20%)

Replacement chrome finish 'D' rim (original Lucas part number 523333) for the lenses on the Lucas 288-3 rear number plate light box assembly. The rim is held by a side hinge pin (not included in...

253-INSERT - Bulb holder double ended insert BA15D - 15.5mm diameter

From £13.66 (£16.39 inc. VAT @ 20%)

 Double contact, double ended SBC/BA15D bulb holder insert. Four spring loaded brass contacts allow it to be adapted for various applications. Overall length 27mm, insulator 11mm long x...

767A - Clear side lens for 249/428 (and Lucas Type ST51) plain and split lens 'D' lamps

From £8.79 (£10.55 inc. VAT @ 20%)

Clear side lens for number plate window for Lucas type ST51 type 'D' Lamps - our part numbers 249, 249A, 428, 428A, CA1149B and CA1149C
Fits into 28mm x 68mm aperture

767W - Wire lens retaining clip - for 428/249 (and Lucas ST51 type) 'D' lamps

From £5.81 (£6.97 inc. VAT @ 20%)

Lens retaining wire for 249/428 part number series (equivalent to Lucas type ST51 type) 'D' lamps

A-13040-S - Dome head bolt kit

From £19.48 (£23.38 inc. VAT @ 20%)

Shallow dome head lamp base repair kit. Approx. 11mm diameter across head of bolt, stem approx. 4.5mm thread x 12mm long. Polished stainless steel, supplied with hex nuts. Per packet of 12 bolt...

361A - Front lens 'O' ring seal for 297 (Lucas 1130) type lamps - Plastic lens (part 361)

From £0.96 (£1.15 inc. VAT @ 20%)

Rubber lens 'O' ring seal for Lucas 1130 type sidelamps (297 series lamps) fitted with the plastic lens (part number 361).

853 - Headlamp converter bulb holder - SBC/BA15D double contact

From £17.13 (£20.56 inc. VAT @ 20%)

Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place in the bulb holder socket on Lucas reflectors with clamp clip...

863A - Headlamp rim catch - Part of Lucas assembly no. 532590

From £18.08 (£21.70 inc. VAT @ 20%)

Chrome on bronze rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. Makes Lucas assembly part no. 532590 with compression spring - part number 864A - and a small...

863B - Headlamp rim catch as Lucas part 509936

From £16.46 (£19.75 inc. VAT @ 20%)

Chromium plated rim catch, for Lucas type head lamps, short style, overall dimensions 31mm long x 27mm wide, equivalent to original Lucas part number 509936. Use with 'spectacle' wire spring clip...

E04C-13016 - Headlamp rim catch - Plain tabs, 5mm slot

From £11.17 (£13.40 inc. VAT @ 20%)

Silver painted bronze bracket. Fits inside headlamp rim, the tongue fits through the rim slot which then accepts rim fixing screw. Dimensions 36mm x 13mm, screw tongue 17mm wide x 13mm tall with...

E1ADKN-13047/50 - Headlamp rim screw and boss assembly - Butler type

From £11.50 (£13.80 inc. VAT @ 20%)

Butler type headlamp screw/stud and catch barrel/boss.

632 - Headlamp stem nut - 5/8" x 26 tpi thread

From £7.48 (£8.98 inc. VAT @ 20%)

Hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). Approx 16mm bore. 10mm deep. 13/16" AF.
Will work with our product 629a

632B - Headlamp stem nut - 1/2" x 26 tpi thread, for P80, P100 & RB160

From £8.52 (£10.22 inc. VAT @ 20%)

Brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc. type lamps. Thread 1/2" x 26 tpi. Equivalent to Lucas part number 500357

629C - Headlamp stud - 5/8" x 26 tpi thread, Butler type

From £19.16 (£22.99 inc. VAT @ 20%)

Headlamp mounting bolt - hollow, used on Butler type lamps. Thread 5/8" x 26 tpi ( ine thread). Measures approx 68mm long x 16mm thread diameter.

629D - Headlamp stud - 5/8" x 26 tpi thread, CAV type

From £19.79 (£23.75 inc. VAT @ 20%)

Headlamp mounting bolt - hollow, used on many CAV type lamps. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.

629B - Headlamp stud - 5/8" x 26 tpi thread, early Lucas type

From £19.75 (£23.70 inc. VAT @ 20%)

Headlamp mounting bolt - hollow, with loose collar. Thread 5/8" x 26 tpi (fine thread) as original item. Measures approx 50mm long x 16mm thread diameter.
36.5mm thread length

629A - Headlamp stud - 5/8" x 26 tpi thread, late Lucas type

From £17.53 (£21.04 inc. VAT @ 20%)

Headlamp mounting bolt - hollow. Thread 5/8" x 26 tpi (fine thread) as the original item. measures approx 56mm long x 16mm thread diameter.
Will work with our product 632 nut

629E - Headlamp stud - 1/2" x 26 tpi thread, for P80 and RB160 type lamps

From £27.58 (£33.10 inc. VAT @ 20%)

Headlamp mounting bolt for P80 and RB160 type lamps. Thread 1/2" x 26 tpi (fine thread) as original item. Measures approx 85mm long x 13mm thread diameter (thread runs for 24mm).

Visor - 7" Headlamp visor - Stainless steel

From £19.77 (£23.72 inc. VAT @ 20%)

Headlight peak for 7" lights. Stainless steel with clips for behind inner headlight rim.

642 - Headlamp 'W' wire - 36mm long

From £2.20 (£2.64 inc. VAT @ 20%)

Lamp glass clip. 'W' wire clip to hold the glass into a headlamp rim - approx 36mm long. Most rims about 8" diameter use four.

642L - Headlamp 'W' wire - 54mm long, for P100 R & S type lamps

From £5.86 (£7.03 inc. VAT @ 20%)

Lamp glass clips. Large 'W' wire for holding glass lenses into headlamp rims, approx 54mm long side. This clip can be used for other applications but is actually made for P100 R & S type lamps.

628 - Lamp cable entry grommet - 3 wire entry, 13.5mm ID

From £3.94 (£4.73 inc. VAT @ 20%)

Rubber lamp entry cable grommet. Approximately 13.5mm internal diameter.

632A - Spot and sidelamp stem nut - 7/16" x 26 tpi thread

From £6.90 (£8.28 inc. VAT @ 20%)

Hexagonal nut for many Lucas type sidelamps. 7/16" x 26 tpi (very fine thread) approx 11mm bore.

631 - Lamp mounting stud & nut - 7/16" x 26 tpi thread, spot and sidelamps

From £18.24 (£21.89 inc. VAT @ 20%)

Lamp mounting bolt - hollow. Thread 7/16" x 26 tpi (fine thread) as original. Measures approx 36mm long x 11mm thread diameter. Supplied with hexagon nut. Used on various Lucas spot and sidelamps.

787A - Lamp mounting rubber for L516 lamp

From £3.71 (£4.45 inc. VAT @ 20%)

Rubber mounting pad for our 787 (Lucas 516 type) sidelamp, dimensions 50mm long, 30mm wide, 14mm tall with 12mm hole.

642A - Headlamp 'W' wire - 48mm long, curved

From £2.49 (£2.99 inc. VAT @ 20%)

Lamp glass clip. Large 'W' wire spring clip for holding glass lenses into headlamp rims. Approx 48mm long side with a slight curve. Useful for deep headlamp rims. Most headlamp rims use four.

927 - MCC/BA9S bulb holder - single contact

From £2.83 (£3.40 inc. VAT @ 20%)

MCC/BA9s bulb holder, 10.4mm diameter, useful general application spare for equal pin bayonet base 9mm cap bulbs. Single contact.

357-BPF - British Pre-focus P36D headlamp connection with lead

From £14.80 (£17.76 inc. VAT @ 20%)

British Pre-focus P36D headlamp connector with lead. Double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters.
Overall...

570A - Raydyot spotlamp mounting arm only

From £53.90 (£64.68 inc. VAT @ 20%)

Replacement side mounting bracket for the pillar mounted Raydyot spotlamp. approx 106mm overall, chrome on brass.
5/16 UNC male thread

776S - Clear side lens for 776/CA1249 (and Lucas ST38) 'Pork Pie' type lamps

From £4.67 (£5.60 inc. VAT @ 20%)

Spare clear side lens for part number series 776 and CA1249 (equivalent to Lucas ST38) 'Pork Pie' type rear lamps.

CA1190B - Red 'STOP' script lens for 211 part number 'Duolamps'

From £24.12 (£28.94 inc. VAT @ 20%)

All glass red lens for 211 part number series 'Duolamp' type rear lamps. Embossed with 'STOP' script on top section.

255R - Reflector dish for Rubbolite No 8 lamp (our 255)

From £15.30 (£18.36 inc. VAT @ 20%)

Plated dish reflector to assist with light reflection in rubber divers lamp, overall diameter 55mm with 14mm hole in the centre.

LR576 - Replacement driving (spot) lamp unit for Lucas SLR/WLR576 type lamps

From £49.99 (£59.99 inc. VAT @ 20%)

Replacement glass lamp unit for Lucas 576 type spot lamps. Supplied with bulb holder but without bulb. Plain domed lens with chrome centre dot. Please order bulb separately - with the British...

FT576 - Replacement fog lamp unit for Lucas SFT/WFT576 type lamps

From £49.99 (£59.99 inc. VAT @ 20%)

Replacement glass lamp unit for Lucas 576 type fog lamps. Supplied with bulbholder but without bulb. Patterned dome lens with chrome centre dot. Please order bulb separately - British Pre-focus...

681 - Replacement GLASS lens for 297 (and Lucas 1130) type sidelamps

From £26.47 (£31.76 inc. VAT @ 20%)

Original pattern opaque glass lens with chrome rim surround for our 297 (Lucas 1130) type side lamps, overall outside diameter 47mm. Fixed in position with retaining screw part number 865 - please...

570G - Replacement glass lens for our 570 lamp

From £12.33 (£14.80 inc. VAT @ 20%)

Replacement front glass lens for Raydyot pillar mounted spot lamp 570. measures 104mm diameter.

516ROT - Lamp medallion - Rotax type

From £9.21 (£11.05 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...

516H - Lamp medallion - Rotax type - size H badge

From £9.21 (£11.05 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...

516K - Lamp medallion - Rotax type - size K badge

From £10.77 (£12.92 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...

516G - Lamp medallion - Rotax type - size G badge

From £10.77 (£12.92 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...

516L - Lamp medallion - Rotax type - size L badge

From £10.77 (£12.92 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...

516F - Lamp medallion - Rotax type - size F badge

From £12.33 (£14.80 inc. VAT @ 20%)

Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured...