High quality 6V solenoid fuel pump that can be fitted in-line to positive or negative earth systems.
Requires a pre-filter and a pressure regulator valve is advised if used with early type...
622.32947
Vintage Car Parts - Fuel System Components - Fuel Pumps
High quality 12V solenoid fuel pump that can be fitted in-line to positive or negative earth systems.
Requires a pre-filter and a pressure regulator valve is advised if used with early type...
622.32947
Vintage Car Parts - Fuel System Components - Fuel Pumps
High quality 6V solenoid fuel pump that can be fitted in-line to positive or negative earth systems.
Requires a pre-filter and a pressure regulator valve is advised if used with early type...
575.05676
Vintage Car Parts - Fuel System Components - Fuel Pumps
New fuel tank float/slide type gauge. Of the pattern offered by Rotherhams of Coventry for many years; fitting into the top of the fuel tank. A deeper float is fitted which works in the modern...
566.9435
Vintage Car Parts - Gauges & Instruments - Fuel Slide Gauge
Cylindrical fuel pump kit for fast road use (with silver top), delivering fuel at rate of up to 27 gallons per hour at a pressure of 5.0 to 6.0 psi.
Negative earth only. Can be fitted anywhere...
519.4537
Vintage Car Parts - Fuel System Components - Fuel Pumps
Cylindrical fuel pump kit for normal road use (with silver top), delivering fuel at rate of up to 18 gallons per hour at a pressure of 4.0 to 4.5 psi.
Negative earth systems only. Can be fitted...
519.4537
Vintage Car Parts - Fuel System Components - Fuel Pumps
PETROL KING Fuel pressure regulator has been designed to improve carburetor feed. Fuel flow is steady and constant at any weather, ambient and driving conditions, thanks to its wide diaphragm...
517.21436
Vintage Car Parts - Fuel System Components - Fuel Pressure Regulators
Fuel filler neck grommet (suits Morris 8 series E saloon and Z van). Black rubber. Internal diameter approx. 44mm, overall flange 99mm x 107mm. Note the angle of slope is approx. 25 degree from...
511.75378
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Grommets
Cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi.
Negative earth only. Can be fitted anywhere...
446.30988
Vintage Car Parts - Fuel System Components - Fuel Pumps
Solid state fuel pump kit for fast road use, delivering fuel at rate of up to 18 gallons per hour at a pressure of 5.0 to 6.0 psi..
Negative earth systems only. Must be fitted within 300mm of...
446.30988
Vintage Car Parts - Fuel System Components - Fuel Pumps
Solid state fuel pump kit for normal road use, delivering fuel at rate of up to 12 gallons per hour at a pressure of 2.5 to 3.0 psi.
Negative earth systems only. Must be fitted within 300mm of...
446.30988
Vintage Car Parts - Fuel System Components - Fuel Pumps
Solid state fuel pump kit for competition use, delivering fuel at rate of up to 25 gallons per hour at a pressure of 6.0 to 7.0 psi.
Negative earth systems only. Must be fitted within 300mm of...
446.30988
Vintage Car Parts - Fuel System Components - Fuel Pumps
Cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi.
Negative earth systems. Can be fitted anywhere...
446.1339
Vintage Car Parts - Fuel System Components - Fuel Pumps
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8" NPTF female ports....
440.19232
Vintage Car Parts - Fuel System Components - Fuel Pumps
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8NPTF female ports....
440.19232
Vintage Car Parts - Fuel System Components - Fuel Pumps
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two.
1/8NPTF female ports....
440.19232
Vintage Car Parts - Fuel System Components - Fuel Pumps
ETHANOLMATE is the leading product for use with ethanol-containing petrol - E10 and E5. Designed as a corrosion inhibitor, fuel stability improver and biocide. Added to the tank when re-fueling,...
438.6456
Vintage Car Parts - Oil System & Lubrication - Oils and Lubricants - Fuel Additives
Locking type Wilmot Breeden chrome plated fuel filler cap. 2 point bayonet fitting cap supplied complete with two keys. Preferred filler neck size inside minimum 37mm, locating tangs max 46mm...
438.5429
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Brass fuel priming cup with plain stem and hollowed top, for early machines. Diameter of stem - 14mm with a 6.5mm bore, which can accomodate a 1/4"BSP thread maximum turned on by the customer.
437.8017
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Fuel Priming Cup Taps
Glass bowl in line fuel filter which has the useful provision of being able to be supported by an additional bracket on to the threaded portion if required, to carry the weight. Available for...
349.73047
Vintage Car Parts - Fuel System Components - Fuel Filtration
Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...
349.37152
Vintage Car Parts - Fuel System Components - Fuel Filtration
Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...
349.37152
Vintage Car Parts - Fuel System Components - Fuel Filtration
Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...
349.37152
Vintage Car Parts - Fuel System Components - Fuel Filtration
Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...
349.37152
Vintage Car Parts - Fuel System Components - Fuel Filtration
Toughened glass body in line fuel filter, body approx 28mm diameter x 77mm long overall (pipe tails in addition). The ends can be unscrewed and taken apart for washing out or changing the filter...
349.37152
Vintage Car Parts - Fuel System Components - Fuel Filtration
Hexagonal push on/off in line tap with 1/8" and 1/4“ BSP threads. 1/8" BSP thread into tank, 1/4" BSP outlet thread with 60 degree cone seat for solder nut and nipple type fittings. Overall...
345.58347
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Hexagonal push on/off in line tap with 1/4“ BSP male threads. 1/4" BSP thread tank side, 1/4" BSP outlet thread with 60 degree cone seat for solder nut and nipple type fittings. Overall...
345.58347
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Pull on/push off in line fuel tap with a pull/push knob with cork seal and attached filter gauze. 1/8'' BSP thread into tank. 7/16" x 19TPI outlet thread for solder nut and nipple connection. The...
294.85013
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Hexagonal push on/off in line tap with 1/8" and 1/4" BSP threads. 1/8" BSP thread into tank with integral filter element, 1/4" BSP outlet thread with 60 degree cone seat, complete with solder nut...
294.77795
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Hexagonal push on/off in line tap with 1/4" and 1/4" BSP inlet and outlet threads. 1/4" BSP thread into tank with integral filter element, 1/4" BSP outlet thread with 60 degree cone seat, complete...
294.77795
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
244.42032
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
244.42032
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
244.42032
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
244.42032
Vintage Car Parts - Fuel System Components - Fuel Filtration
Glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres). Detatchable glass bowl held by U bracket.
This filter is offered with right or left inlet port (as...
244.42032
Vintage Car Parts - Fuel System Components - Fuel Filtration
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
241.84201
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
241.84201
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Angled pull on/push off in line fuel tap with a pull/push knob with a cork seal and filter gauze attached. Offered with either a 1/4" BSP or 1/8'' BSP male thread into the tank. 7/16" TPI outlet...
241.84201
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Replacement glass bowl for CA1026 fuel filter assembly, overall dimensions 58mm tall, 53.6mm outside diameter at the top of the bowl, 46mm inside diameter at the top.
108.750885
Vintage Car Parts - Fuel System Components - Fuel Filtration
Castrol Classic Valvemaster Plus with its unique phosphorus formula provides the ultimate protection against valve seat recession. Vavemaster Plus contains Octimise-Plus friction modifier for...
95.08709
Vintage Car Parts - Oil System & Lubrication - Oils and Lubricants - Fuel Additives
`Pratts' transfers for petrol/fuel cans etc. reproduced for that authentic touch. See fitting instructions regarding application. Measures approx 165mm wide x 115mm high overall.
87.527084
Vintage Car Parts - Accessories - Signs and Transfers
Reproduction of the original Shell transfer for petrol/fuel cans etc. Please see fitting instructions regarding application. Measures approx. 105mm wide x 108mm high overall.
87.527084
Vintage Car Parts - Accessories - Signs and Transfers
Castrol Classic Valvemaster with its unique phosphorus formula protects against valve seat recession under all driving conditions. Containing Etha-Guard ethanol stabiliser that protects and...
83.10356
Vintage Car Parts - Oil System & Lubrication - Oils and Lubricants - Fuel Additives
Aston type 2 - polished light alloy finish with roller catch. Internal thread 3 1/2" BSP (100mm, 3.93") x 11 TPI. Approx. 122mm x 162mm overall. Release lever stands up slightly at side roller...
76.580315
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Flanged, cast brass 90 degree elbow - 1/4" BSP female thread at one end, 3/8" BSP male thread with a flanged base at the other. Overall length 55mm, 20mm diameter with a 25mm diameter flange....
74.61163
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Brass air pressure pump for fuel tank pressurisation etc. The tubular body has a flange 90mm dia (undrilled) for fixing unit on the vehicle. All brass construction T grip handle, shaft and seal...
67.1369
Vintage Car Parts - Fuel System Components - Air Pressure Pump
Re-manufactured Ki-Gass hand primer fuel pump. Supplied as shown. 44mm diameter mounting flange, wording KI-GASS SCREW DOWN AFTER USE, two stars and one arrow on engraved nickel silver disc,...
58.84662
Vintage Car Parts - Fuel System Components - Ki-Gass Pumps & Repair Kits
Re-manufactured Ki-Gass hand primer fuel pump. Supplied as shown. 44mm diameter mounting flange, wording KI-GASS SCREW DOWN AFTER USE, two stars and one arrow on engraved nickel silver disc,...
58.84662
Vintage Car Parts - Fuel System Components - Ki-Gass Pumps & Repair Kits
Re-manufactured Ki-Gass hand primer fuel pump. Supplied as shown. 44mm diameter mounting flange, wording KI-GASS SCREW DOWN AFTER USE, two stars and one arrow on engraved nickel silver disc,...
58.84662
Vintage Car Parts - Fuel System Components - Ki-Gass Pumps & Repair Kits
Monza type cap - polished light alloy or chrome plated finish - internal thread 2 3/4" (70mm) x 16 TPI. Measures approx 86mm x 114mm overall. Release button is opposite the hinge, under the lid.
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Monza type cap - polished light alloy or chrome plated finish - internal thread 2 3/4" (70mm) x 16 TPI. Measures approx 86mm x 114mm overall. Release button is opposite the hinge, under the lid....
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Aston type two - polished light alloy finish. Internal thread 3 1/2" BSP (100mm, 3.93") x 11 TPI. Approx 122mm x 162mm overall. Release lever stands up slightly at side.
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Monza type cap - internal thread 2" (51mm) x 18 TPI. Overall size approx 60mm wide x 82mm long x 28mm tall. Release button is opposite the hinge, under the lid.
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Monza type cap - internal thread 2" (51mm) x 18 TPI. Overall size approx 60mm wide x 82mm long x 28mm tall. Release button is opposite the hinge, under the lid.
Re-manufactured pattern part
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Reproduction of Bonora lever top filler cap, period fitting to Singer and MG of the 1930's, supplied in chrome plate finish over bronze, fully machined and assembled. Internal thread to neck 2...
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Reproduction of larger Bonora lever top filler cap, period fitting of the 1930's. Supplied in chrome plate finish over bronze (three lost wax castings machined and assembled). Internal thread to...
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Reproduction of Bonora twist on lever top filler cap, period fitting to MG of the 1930's. Supplied in chrome plate finish over brass, fully machined and assembled. Internal neck plain 2 3/8"...
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Reproduction of Bonora lever top filler cap, period fitting to MG of the 1930's, supplied in chrome plate finish over brass, fully machined and assembled. Internal thread to neck 2" (approx 51mm)...
53.461014
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Filler Caps
Repair kit for CA1307B (Vintage Supplies re-manufactured part as well as earlier Ki-Gass pumps of the same design, see image). the kit includes the necessary length of gland seal, 2 balls, 2...
52.612328
Vintage Car Parts - Fuel System Components - Ki-Gass Pumps & Repair Kits
Repair kit for CA1307 Ki-Gass pump of the design shown in the attached photograph. The kit includes the necessary length of gland seal, 2 balls, 2 shorter springs and 2 longer springs - included...
52.612328
Vintage Car Parts - Fuel System Components - Ki-Gass Pumps & Repair Kits
Filler cap neck adaptor in steel to suit our 968 Bonora lever top filler cap, for welding onto filler neck or fitting into 63mm ID hose. External thread 2 3/8" ( approx 60mm ) x 18TPI, 28mm deep...
50.812313
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) pipe. Thread 3 1/2" BSP, overall diameter 126mm. 6 holes with 4.5" pcd. This flange will accept the LIK1 locking filler cap
50.812313
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) or 2 1/4" (57mm) pipe. Thread 2.5" x 16TPI, overall diameter 94mm. 6 holes at 3" pcd. This flange will accept the LIK1 locking filler cap.
50.812313
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) pipe. Thread 2" x 18TPI, overall diameter 82mm. 6 holes at 2.5" pcd. Please note - this flange will NOT accept the LIK1 locking filler cap.
50.812313
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Flanged aluminium neck with internal spigot for 2" (51mm) or 2 1/4" (57mm) pipe. Thread 2 3/4" x 16TPI, overall diameter 94mm. 6 holes at 3" PCD. This flange will accept the LIK1 locking filler cap
50.812313
Vintage Car Parts - Fuel Filler Caps, Necks & Grommets - Adaptor Necks
Solder type banjo union supplied complete with 3/8" BSP bolt and washers. The 3/8" copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
50.574608
Vintage Car Parts - Fuel System Components - Banjo Fittings for Fuel
Solder type banjo union supplied complete 1/8" BSP with bolt and washers. The 5/16" copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
50.574608
Vintage Car Parts - Fuel System Components - Banjo Fittings for Fuel
Solder type banjo union supplied complete with 1/4"BSP bolt and washers. The 5/16 " copper pipe is soldered into the banjo socket. If a smaller pipe is to be fitted a packing piece can be also...
50.574608
Vintage Car Parts - Fuel System Components - Banjo Fittings for Fuel
Banjo union supplied complete with bolt and washers for Solex carbs. Banjo body is machined with a 1/4" hole into which 1/4" pipe is directly soldered. Brass body, steel bolt with washers. Thread...
50.574608
Vintage Car Parts - Fuel System Components - Banjo Fittings for Fuel
Solder type banjo for SU type carburetters - 5/16 " outer diameter copper pipe is soldered into the banjo socket. Cast, machined brass. Recessed sealing face outer diameter 22.25mm, flat sealing...
Comparable to other manufacturer part numbers - AUC2695
50.574608
Vintage Car Parts - Fuel System Components - Banjo Fittings for Fuel
Choke cable assembly with chrome locking Tee knob, black outer and flexible inner cable. Approx 1500mm length (inner wire 1670mm length). Tee handle measures 51mm, panel hole required is 9.5mm.
49.050587
Vintage Car Parts - Fuel System Components - Choke Cables
Control cable with stiff piano wire centre wire, 1500mm long which can be shortened as required. Requires 9.4mm panel hole for fixing. Stiff inner wire cable. The 22mm diameter plastic knob is of...
49.050587
Vintage Car Parts - Fuel System Components - Choke Cables
Locking choke cable 1500mm long which can be shortened as required. Requires 9.1mm panel hole for fixing. Inner bowden wire cable. The plastic knob is of modern appearance as used on many 1960's...
49.050587
Vintage Car Parts - Fuel System Components - Choke Cables
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
48.976913
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
48.976913
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with male 1/4“ BSP male threads at both ends. Supplied complete with compression nuts and olives for fitting to either 1/4" or 5/16" OD copper pipe. Body length...
48.976913
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight, 1/8" BSP threaded in-line tap for oil supply. 60 degree conical seat in both ends for use with 1/8"BSP solder nuts and nipples to be bought separately.
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with 1/4“ BSP threads on the inlet and outlet - both have a 60 degree seat for 1/4" BSP solder nut and nipple type fittings. Body length (including threads) 45mm and...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with a 1/8" BSP thread (under a flange) into the tank and a 1/4" BSP outlet thread, with a 60 degree cone seat for solder type fittings. Overall dimensions 45mm long...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with 3/8“ BSP threads on the inlet and outlet - both have a 60 degree seat for 3/8" BSP solder nut and nipple type fittings. Body length (including threads) 45mm and...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with 1/8" BSP male thread (under sealing flange) into tank and a 7/16" x 19TPI outlet thread, with a 60 degree seat for solder nut and nipple type fittings for 3/16" or 1/4"...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
In-line circular body brass tap with cork gasket under the lever. Tank side fitting with 1/4" BSP thread under hexagon. Coned 1/4" BSP outlet connection for 1/4" nut and nipple connection. Overall...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Straight in line tap with 1/4" BSP threads on the inlet and outlet - the inlet is fitted with an integral filter and the outlet has a 60 degree cone seat and is fitted with a 1/4" BSP solder nut...
48.028618
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Three way tap with 1/4" BSP male threads. Brass body with cork under lever. Supplied without nuts and nipples, please order them separately. Overall dimensions with nuts and nipples fitted - 100mm...
47.13022
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Changeover Taps
1/4" BSP male threaded two way tap for solder nut and nipples. All three threaded ends have a 60 degree cone seat. The tap is supplied bare of any fittings, which are to be ordered separately....
47.13022
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Changeover Taps
ENOTS pattern three way tap with cork plate and 1/4" BSP threads, for 1/4'' or 5/16" OD copper tube fittings, to be ordered separately. The hexagonal bar that the lever is attached to can be...
47.13022
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Changeover Taps
ENOTS three way tap with cork plate and 3/8" BSP male threads, for 3/8" OD copper tube fittings, to be ordered separately. The hexagonal bar that the lever is attached to can be modified if...
47.13022
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Changeover Taps
Lost wax cast bronze lever for CA456 taps. 64mm total length and 17mm wide at ear. Cross hole recessed and threaded for a pan head M4 screw (supplied) to allow the lever to be tightened on to the...
47.13022
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Changeover Taps
Air filter paper element -round - Ford alternative part reference 109E-9601-D.
Also equivalent to other manufacturer part numbers:
BMC Austin 1H11334 , 12H2088
Vauxhall Bedford 7955266
David...
Comparable to other manufacturer part numbers - C1530, CA641PL, MD006
ENOTS type main/reserve tap. Fits into the bottom of some Autovacs. 3/8" BSP male thread for outlet pipework connection, supplied with nut and nipple for solder fitting to 3/8” OD pipe. 1/2"...
43.295624
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - In Line Fuel and Oil Taps
Replacement cork and brass pull knob for CA977 and 201 type taps. Cork approximately 10mm diameter. Dimension under knurled head to end of cork 23mm. Brass section under knurled head is slotted.
43.295624
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Push Fuel and Oil Taps
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Elbows
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Elbows
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Elbows
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Elbows
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Elbows
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP,...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Tees
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
Steel union with 1/8BSP tapered...
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Unions
Brass straight drain tap with 1/4" BSP male thread, for radiator drain. OFF position is with the lever in line with tap. BMC part no. 3H576 for MG, Wolseley, Austin. Engine block drain tap.
Comparable to other manufacturer part numbers - 3H576,
36.98404
Vintage Car Parts - Pipe, Fittings & Taps - Taps & Valves - Drain Taps
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit.
32.664932
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Solder Nuts and Nipples
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit.
1/8" pipe
32.664932
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Solder Nuts and Nipples
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit.
3/16" pipe
32.664932
Vintage Car Parts - Pipe, Fittings & Taps - Fittings - Solder Nuts and Nipples
