Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Index Keywords
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • Show All

Bonnet catch pull and locating bracket of 'squashed tube' pattern offered by Ewarts. 113mm long. Finger pull is shaped off the end of the tube. Base 36mm x 24mm. bonnet clip base 31mm x 22mm. We offer this catch is either chrome plate finish or nickel plate finish.

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart

Black rubber buffer for fitting behind bonnet catch plate number Y-16750. Dimensions - base 21mm x 18mm, top 21mm x 10mm.

Reproduction Remax pattern push and turn bonnet fastener catch. Push handle down to engage catch on to clip (not supplied, as part of vehicle) and turn handle to release catch to open bonnet. Base 47mm diameter with 4 mounting holes approx. 28mm centre horizontally, 22mm vertically. Catch protrudes approx 65mm from panel at an angle.

Bonnet catch pull and locating bracket of 'squashed tube' pattern offered by Ewarts. 113mm long. Finger pull is shaped off the end of the tube. Base 36mm x 24mm. bonnet clip base 31mm x 22mm. We offer this catch is either chrome plate finish or nickel plate finish. -- nickel plated

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall. We offer this item in different guises: All chrome, 4 lobe twist top with plain top. All chrome, 5 lobe twist top with plain top - Tenax pattern. All chrome, 4 lobe twist top with Ripaults marking on top. We do not offer the hook that this type of fastener clips on to, this was either a horizontal bar on a mounting plate OR a hook rod type - both featuring some adjustment for vertical movement. --

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall. We offer this item in different guises: All chrome, 4 lobe twist top with plain top. All chrome, 5 lobe twist top with plain top - Tenax pattern. All chrome, 4 lobe twist top with Ripaults marking on top. We do not offer the hook that this type of fastener clips on to, this was either a horizontal bar on a mounting plate OR a hook rod type - both featuring some adjustment for vertical movement.

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart -- Nickel finish

Small top quality catch, approx 4.25" / 110mm long overall, complete with catch plate. Chromium plated on brass, small rubber buffer on back. Base plate and catch plate same size (40mm x 19mm with holes 25.5mm apart) dimension from base plate to top of hook eye approx 92mm (will extend to max of 108mm approx). Our best selling bonnet catch.

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall. We offer this item in different guises: All chrome, 4 lobe twist top with plain top. All chrome, 5 lobe twist top with plain top - Tenax pattern. All chrome, 4 lobe twist top with Ripaults marking on top. We do not offer the hook that this type of fastener clips on to, this was either a horizontal bar on a mounting plate OR a hook rod type - both featuring some adjustment for vertical movement. --

Screw down bonnet catch which bolts to the outside of the bonnet panel, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall. We offer this item in different guises: All chrome, 4 lobe twist top with plain top. All chrome, 5 lobe twist top with plain top - Tenax pattern. All chrome, 4 lobe twist top with Ripaults marking on top. We do not offer the hook that this type of fastener clips on to, this was either a horizontal bar on a mounting plate OR a hook rod type - both featuring some adjustment for vertical movement. --

Small rubber hook with zinc plated bracket and clip. Overall length approx 54mm. Maximum extension from relaxed to tension not to exceed 10%.

Rubber hook with zinc plated bracket and clip. Overall length approx 122mm. Maximum extension from relaxed to tension not to exceed 10%.

Bonnet catch pull and locating bracket of 'squashed tube' pattern offered by Ewarts. 113mm long. Finger pull is shaped off the end of the tube. Base 36mm x 24mm. bonnet clip base 31mm x 22mm. We offer this catch is either chrome plate finish or nickel plate finish. -- chrome plated

Chrome finish on brass, tee shape twist handle fastener with 'R' embossed into top. Push top down against spring to engage hook, turn through 90 degree to release. Lever top 52mm long, angled base approx 45mm diameter with four fixing holes. Height fitted 95mm. Mounting hole centres approx 27mm horizontal, 23mm vertical

Chrome finish on brass, tee shape twist handle fastener. Push top down against spring to engage hook, turn through 90 degree to release. Lever top 52mm long, angled base approx 45mm diameter with four fixing holes. Height fitted 95mm. mounting hole centres approx 28mm horizontal, 22mm vertical. Similar to Ripaults Model S.A.4

Chrome plated brass bonnet catch as fitted to Morris Minor, MG J2, Wolseley Hornet etc. The catch has a kidney shape plate to allow movement. Catch size 133mm overall.

Bonnet catch plate for mounting to bonnet panel. Base approx 72mm tall x 27mm wide. Ford applications originally. Lost wax cast in bronze.

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep). --

Bonnet/hood catch supplied with pocket. Polished stainless steel parts, 91mm tall overall, base 55mm wide. Choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep). --

468 - Bonnet catch

From £0.00 (exc. VAT)

Open spring bonnet catch, nickel plate finish, 125mm long, a good value spring catch to hold a bonnet down, supplied with top catch.

High quality spring loaded pull catch with loop finger pull ring, powder coated finish, complete with pocket. Approximately 118mm long. Chrome finger pull ring. Hook for pocket approximately 80mm from base. Very similar to Ripaults Model No. P.U.I.

Large, top quality catch. Approx. 135mm overall size complete with catch plate. Chromium or nickel plated on brass. Mountings approx 90mm apart -- Chrome finish

Pull down bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. Chrome on brass, approx 4.75" / 120mm long. Complete with bonnet catch plate. Hole centres on receiver plate 70mm, on bonnet catch base plate 28mm.

CA236A - Bonnet catch - T top pattern

From £0.00 (exc. VAT)

Stainless steel bonnet catch with T top/bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally.