Rubber buffer for Wilmot Breeden harmonic stabiliser front bumper. Approx 38mm diameter x 30mm high overall.

Rubber buffer stop with 31mm diameter x 18mm tall domed top section, with undercut coned tab for securing in a 16mm panel fixing hole.

As per illustration - approximate size 34mm x 27mm x 15mm thick.

As per illustration - approximate size 36mm x 20mm x 16mm thick

17mm diameter x 14mm high buffer top with locating tab for securing in a 12mm fixing panel hole

19mm diameter x 11mm high buffer top with tab on base for securing in an 11mm fixing panel hole.

24mm diameter x 17mm high buffer top, with locating groove for fixing into a 19mm fixing panel hole.

17mm diameter x 24mm high buffer top with tab base for locating in a 12mm fixing panel hole

20mm diameter x 6mm high buffer top, with undercut coned spigot for securing in a 10mm fixing panel hole.

30mm diameter x 14mm high buffer top with fixing tab on base, for fitting into a 19mm panel fixing hole.

24mm diameter x 13mm high buffer top, with locating tab on base for fitting in to a 12mm panel fixing hole.

19mm diameter x 15mm high buffer top, with tab insert on the base for fitting into 10mm panel fixing hole.

Moulded rubber buffer and stop featuring a 22mm diameter x 5mm high cushioning surface with integral retaining tab for installation into a 12mm panel hole. Designed to absorb impact, reduce vibration and prevent damage between closing panels and bodywork.

13mm dia x 5mm high buffer top, with cone back for fitting into a 5mm panel fixing hole

Black moulded rubber buffer and stop measuring approximately 25mm diameter x 13mm high, with a 3mm fixing hole. Used as a cushioning stop to prevent panel, door or body component damage caused by vibration or impact. Suitable for restoration and replacement of worn original buffers.

19mm dia x 9mm high, 3mm fixing hole

Hollow moulded cap 20mm diameter x 11mm high with a 6mm stud hole entry into the hollow.

As per illustration - approximate size 23mm x 30mm x 16mm thick, insert lug 23mm x 22mm 11mm

As per illustration, a larger buffer of approximate size 32mm x 35mm x 15mm thick. This rubber buffer is also available as part of a complete set that also includes a cast bronze buffer shoe and screw plate - please see part number 566.08SET.

As per illustration - approximate size 37mm x 26mm x 15mm thick, insert lug 28mm x 13mm x 8 (taper)

As per illustration - approximate size 38mm x 31mm x 11mm thick, insert lug 26mm x 18mm x 8mm

As per illustration - approximate size 41mm x 32mm x 16mm thick, insert lug 19mm x 19mm x 9mm.

As per illustration - approx size 32mm x 24mm x 13mm thick, insert lug 25mm x 17 (taper) x 13mm

As per illustration - approximate size 32mm x 18mm x 13mm thick, insert lug 22mm x 13mm x 10mm.

As per illustration - approximate size 25mm x 29mm x 13mm thick, insert lug 17mm x 29mm x 7mm

As per illustration - approx size 29mm x 23mm x 13mm thick, insert lug 21mm x 16mm x 10mm.

As per illustration - approximate size 36mm x 31mm x 14mm thick, insert lug 32mm x 25mm x 7mm.

Replacement moulded rubber door buffer designed to cushion door closure and prevent metal-to-metal contact. Approximate dimensions 32mm x 23mm x 14mm thick, with locating lug approximately 22mm x 14mm x 10mm. Designed to cushion door closing action and reduce vibration and wear around the door aperture.

As per illustration - approximate size 38mm x 23mm x 14mm thick, insert lug 27mm x 18mm x 9mm

As per illustration - approximate size 31mm x 29mm x 13mm thick, insert lug 31mm x 19mm x 8mm

As per illustration - approximate size 31mm x 24 mm x 9mm thick, insert lug 27mm x 18mm x 8mm

Quality replacement moulded rubber door buffer designed to cushion door closure and prevent metal-to-metal contact. Approximate overall dimensions 32mm x 23mm x 16mm thick, with locating lug measuring approximately 25mm x 14mm x 13mm. Helps reduce vibration, noise and body damage while maintaining correct door alignment.

Rubber buffer stop with 24mm diameter x 12mm high domed top, with 9mm diameter 11mm long plain fixing post for securing n a 9mm diameter panel fixing hole.