Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Index Keywords
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • Show All

Black rubber extrusion as per illustration. Approximately 15mm x 15mm body with a flange tail approx 21mm long. Please see drawing for more detailed dimensions. --

Black rubber extrusion as per illustration. Approximately 15mm x 15mm body with a flange tail approx 21mm long. Please see drawing for more detailed dimensions. -- Rear windscreen rubber for anglia, prefect and popular with bakelite trim fitted. 2.2mtr required

Black rubber extrusion, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm thick glass. -- 8mm tall with a 6mm base.

'Chrome' finish plastic windscreen filler/lock strip, available separately for window weatherstrip. Arrow head shape filler approx 10.1mm wide.

Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler.

Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler.

Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler.

Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler.

Black rubber extrusion, as per illustration. Dimensions 19mm long, 6.8mm thick, reducing to 3.5mm at 'T' with 1mm tongue on front edge.

'Chrome' finish plastic T section windscreen filler/lock strip for windscreen weatherstrip. 'T' shape filler approx 7.6mm wide x 7mm tall with a 3.5mm diameter bead at the base. As used on the Triumph Herald.

Wedge shaped black silicone rubber, applications include Austin Sheerline quarterlight seal. 11mm long, 5.6mm wide at thick end, 1.6mm wide at thin end.

Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black silicone extrusion as profile, particularly suitable for quarterlight seal (Bristol, Riley). Base 6mm, 11mm high, flange extends 19mm. Overall width 23mm.

Black rubber extrusion, as per illustration. 8mm wide base x 36mm long flap (37.5mm overall)

Black rubber extrusion, as per illustration. 11mm across top x 20mm high.

Black rubber extrusion, as per illustration, 7.6mm base x 20mm long approximately.

Black rubber extrusion, as per illustration. Base 8mm, 24mm overall, neck 4mm.

Black rubber extrusion, as per illustration. 7.5mm base, 25mm overall, 3.5mm neck.

Black rubber extrusion, as per illustration. 5.5mm base, 22mm overall, 2mm neck.

Black rubber extrusion, as per illustration. 10mm across base x 19mm overall, 6mm neck.

Black rubber extrusion, as per illustration. 6mm base x 21mm overall, 2mm neck.

Split tube rubber extrusion, used as a base for draught excluder. 32mm overall width, 11mm diameter, 2mm thick rubber. As used on MG 'Y' and Morris series 'E.'

Black rubber extrusion, as per illustration. 12mm diameter bead, 24mm overall width, channel/slot 2mm.

Black rubber extrusion, as illustration, 9mm diameter bead on 7.5mm wide base.14mm overall height.

Black rubber extrusion, as per illustration. Rest rubber with flat base 19mm wide, approx 26mm overall width, maximum height approx 9mm.

Black rubber extrusion, as per illustration. Rest rubber with a flat base approx. 20mm wide, approx 30mm wide overall, max height approx.10mm.

Black rubber extrusion, as per illustration. 7.5mm diameter bead x 21mm overall, 2.3mm flange thickness.

Black rubber extrusion, as per illustration. 11mm bead x 26mm overall width, 1.8mm thick tail

Black, as per illustration. 5.5mm diameter tube, with flange on side. 15mm width overall, 1.6mm flange thickness.

Black rubber extrusion, as per illustration. 3.75mm bead x 20mm overall, 1.75mm thick tail.

Black rubber extrusion, as per illustration. 11mm diameter bead, 38mm wide overall

Black rubber extrusion, as per illustration. 3.5mm bead with 28mm wide, 1.6mm thick tail.

Black rubber extrusion, as per illustration. 21mm x 7mm

Black rubber extrusion as per illustration. Approximately 12mm across base x 6mm body depth.

Black rubber filler strip profile for roof seal, as per illustration. Base 12mm, top width 20mm, overall height 10mm.

Black rubber extrusion as per illustration. Used where the glass is larger than the panel aperture hole. Glass maximum 6mm thickness. Panel maximum 3mm thickness. This section is supplied with the same amount of 'chrome' coloured plastic filler strip as ordered of the section.

Black rubber extrusion as per illustration. For 6mm thick glass. 11mm wide x 12mm deep. Flange tails 8mm and 9mm long approx

Black rubber extrusion as per illustration. Approximately 18mm overall wide, slot approx 10mm deep x 1.5mm wide.

Black rubber extrusion as per illustration. Approximately 15mm x 15mm body with a flange tail approx 21mm long. Please see drawing for more detailed dimensions.

Black rubber extrusion as per illustration. Approximate overall dimensions 10.5mm x 19mm, please see the drawing for more detailed dimensions

Black rubber extrusion as per illustration. For 6mm thick glass. 11mm wide x 12mm deep, with one flange tail approximately 12mm long.

Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black rubber extrusion, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm thick glass.

Black rubber extrusion, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm thick glass. --

Black rubber extrusion, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm thick glass. --

Black rubber extrusion, as per illustration. 16mm x 4.5mm wide, with 2mm slot

Black rubber extrusion, as per illustration. 12mm x 6.7mm wide, with 3mm slot

Black rubber extrusion, as per illustration. 10.2mm x 4.5mm wide, with 2mm slot

Black rubber extrusion, as per illustration. 6.5mm diameter with 1.5mm wide slot.

Black rubber extrusion as per illustration. 15mm x 9mm x 1.8mm thick approximately

Black rubber extrusion as per illustration. 41mm x 5mm, 34.5mm wide channel between inside faces. Commonly used between tanks and metal straps to avoid wear.

Black rubber extrusion as per illustration. Base 20mm, flange 26mm extended - approx 21mm high at rest. Available in the following lengths only: 1.54m long - Please order ONE length only 3.08m long - Please order TWO lengths and this will be supplied as one long piece

Black rubber windscreen filler/lock strip available separately for window weatherstrip. Arrow head shape filler approximately 10.4mm wide.

Moulded rubber for front windscreen / screen, standard type. 3.0mtr long, we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.

Moulded rubber for rear windscreen / screen, standard type. 2.75mtr long we offer this with either black (as original) locking filler strip, or as an alternative we can supply chrome locking strip.

Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --

Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of filler strip as of section ordered. Please indicate whether you require black or chrome filler. --