Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB).
Black or brown stitched leather strap, 200mm long x 51mm wide, with chrome or black staples in either end.
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples.
Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour
Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour -- Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide.
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Black or brown stitched leather door check strap 30mm wide. The staples (footman loops) are fitted at each end with hole centres approximately 60mm. Choice of 150mm or 190mm long leather straps and chrome or black staples. --
Starting handle strap pocket - brown or black leather. 100mm long pocket with a 38mm inside diameter. Strap 500mm long for bolting on to the chassis. No hole in strap. -- Starting handle strap pocket - brown leather. 100mm long pocket with a 38mm inside diameter. Strap 500mm long for bolting on to the chassis. No hole in strap.
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BLK-AA black stitched leather strap, 200mm x 51mm, with chrome fixed fitting ends (type A)
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BRN-BB brown stitched leather strap, 200mm x 51mm, with chrome sliding fitting ends (type b)
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BRN-AB brown stitched leather strap, 200mm x 51mm, with chrome fittings. 1 x fixed end (type a) 1 x sliding end (type b)
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BRN-AA brown stitched leather strap, 200mm x 51mm, with chrome fixed fitting ends (type A)
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BLK-AB black stitched leather strap, 200mm x 51mm, with chrome fittings. 1 x fixed end (type A 1 x sliding end (type B)
Brown or black stitched leather strap, 200mm long x 51mm wide, with chrome fixed or sliding end fittings. Choice of both fixed end (type AA), both sliding end (type BB) or one fixed and one sliding end (type AB). -- 800BLK-BB black stitched leather strap, 200mm x 51mm, with chrome sliding fitting ends (type B)
Black or brown stitched leather strap, 200mm long x 51mm wide, with chrome or black staples in either end. -- brown stitched leather strap, 200mm x 51mm, with chrome staples in either end.
Black or brown stitched leather strap, 200mm long x 51mm wide, with chrome or black staples in either end. -- Black stitched leather strap, 200mm x 51mm, with chrome staples in either end
Black or brown stitched leather strap, 200mm long x 51mm wide, with chrome or black staples in either end. -- brown stitched leather strap, 200mm x 51mm, with black staples in either end.
Black or brown stitched leather strap, 200mm long x 51mm wide, with chrome or black staples in either end. -- Black stitched leather strap, 200mm x 51mm, with black staples in either end
Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide. Choice of black or brown leather colour -- Sliding type as fitted to many vehicles. Spring steel centre covered with leather. 240mm long x 38mm wide.
Leather spare wheel or bonnet strap with ring centre. Made to order (normally taking 10/14 days) to specific measurements using quality brown or black leather. Widths available 31mm or 38mm or 51mm. This pattern is made as a four part strap, buckle on the main strap or on the tie strap, footman staples at ends. When ordering belts, to enable pricing, pease email a drawing to us advising dimensions on the image - email info@vintagesupplies.com. Normally we provide plated fittings, though belts can be made with your original fittings if required. No holes are punched into the plain strapping, supplied with one fixed keeper and one sliding keeper near buckle. Please provide separate measurements (note that the maximum length piece of any leather strap is 140cm without a join) for straps A, B, C, D & E please note that dimension C should be the joined up length of strap. Allow enough length on straps A and B for the strap to pass through the buckle and be fastened. Please note that the price shown in the cost box is only a 'from' cost - we will advise the actual price of the item specified before we process the order PLEASE NOTE, THE BONNET STRAP PICTURED IS AN ILLUSTRATION OF BELT TYPE ONLY, THEY ARE SUPPLIED IN DARK BROWN OR BLACK.
Leather belt type strap for luggage restraint, hood strapping etc. These straps are made to order (normally taking 10/14 days) to specific measurements using quality brown or black leather, widths available 25mm, 31mm, 38mm or 51mm. When ordering belts, to enable pricing, please email a drawing to us advising dimensionson the image - email info@vintagesupplies.com. Please provide separate measurements, note that the maximum length piece of any leather strap is 140cm without a join, for straps A,B and C, please note that dimension C should be the joined up length of strap, allow enough length on straps A and B for the strap to pass through the buckle and be fastened. Normally we provide plated fittings though belts can be made with your original fittings if required. No holes are punched into the plain strapping, supplied with one fixed keeper and one sliding keeper near buckle. Please note that the price shown in the cost box is only a 'from' cost - we will advise the actual price of the item specified before we process the order PLEASE NOTE, THE BONNET STRAP PICTURED IS AN ILLUSTRATION OF BELT TYPE ONLY, THEY ARE SUPPLIED IN DARK BROWN OR BLACK.
Leather bonnet strap, made to order (normally taking 10/14 days) to specific measurements using quality brown or black leather. Widths available 31mm or 38mm or 51mm. This pattern is made as a three part strap - buckles on the top strap, pointed end plain strap to both sides, footman staples at ends, with or without pad under buckle. When ordering belts, to enable pricing, please email a drawing to us advising dimensions on the image. Email info@vintagesupplies.com. Normally we provide plated fittings, though belts can be made with your original fittings if required. No holes are punched into the plain strapping, supplied with one fixed keeper and one sliding keeper near buckle. Please provide separate measurements (note that the maximum length piece of any leather strap is 140cm without a join) for straps A,B and C, please note that dimension C should be the joined up length of strap. Allow enough length on straps A and B for the strap to pass through the buckle and be fastened. Please note that the price shown in the cost box is only a 'from' cost - we will advise the actual price of the item specified before we process the order PLEASE NOTE, THE BONNET STRAP PICTURED IS AN ILLUSTRATION OF BELT TYPE ONLY, THEY ARE SUPPLIED IN DARK BROWN OR BLACK.
Leather bonnet strap, made to order (normally taking 10/14 days) to specific measurements using quality brown or black leather. Widths available 31mm or 38mm or 51mm. This pattern is made as three part strap - buckles on the side straps, pointed end plain strap over the bonnet top, footman staples at ends, with or without pad under buckle. When ordering belts, to enable pricing, please email a drawing to us advising dimensions on the image - email info@vintagesupplies.com. Normally we provide plated fittings, though belts can be made with your original fitting if required. No holes are punched into the plain strapping, supplied with one fixed keeper and one sliding keeper near buckle. Please provide separate measurements (note that the maximum length piece of any leather strap is 140cm without a join) for straps A,B and C. Please note that dimension C should be the joined up length of strap. Allow enough length on straps A and B for the strap to pass through the buckle and be fastened. Please note that the price shown in the cost box is only a 'from' cost - we will advise the actual price of the item specified before we process the order PLEASE NOTE, THE BONNET STRAP PICTURED IS AN ILLUSTRATION OF BELT TYPE ONLY, THEY ARE SUPPLIED IN DARK BROWN OR BLACK.
Leather bonnet strap, made to order (normally taking 10/14 days) to specific measurements using quality brown or black leather. Widths available 31mm or 38mm or 51mm. This pattern is made as a two part strap - buckle on one strap, pointed end on the other, footman staples at ends, with or without pad under buckle. When ordering belts, to enable pricing, please email a drawing to us advising dimensions on the image - email info@vintagesupplies.com. Normally we provide plated fittings, though belts can be made with your original fittings if required. No holes are punched into the plain strapping, supplied with one fixed keeper and one sliding keeper near buckle. Please provide separate measurements (note that the maximum length piece of any leather strap is 140cm without a join) for straps A,B and C. Please note that dimension C should be the joined up length of strap, allow enough length on straps A and B for the strap to pass through the buckle and be fastened. Please note that the price shown in the cost box is only a 'from' cost - we will advise the actual price of the item specified before we actually process the order PLEASE NOTE, THE BONNET STRAP PICTURED IS AN ILLUSTRATION OF BELT TYPE ONLY, THEY ARE SUPPLIED IN DARK BROWN OR BLACK.