Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
High quality 24V solenoid fuel pump that can be fitted in-line to negative earth systems. Suited to larger diesel engine applications. Pumps are tapped for 1/4" NPTF fitting and comes supplied with two 1/4" NPTM to 3/8" push on hose unions. Also supplied with mounting bracket and bolt, cable connectors, short lengths of hose and hose clips 24 Volt. 10 - 14psi shut off. 130 litres per hour at free flow with 3/8" ID hose Recommend using PTFE tape on union threads - product code PTFE
High quality 12V solenoid fuel pump that can be fitted in-line to negative earth systems. Suited to higher pressure applications including diesel engines. For lower pressure versions of this 12V pump, please see part numbers PFP12LP (2.5 to 4.5 psi) and PFP12 (5 to 9 psi) A pressure regulator may be required. Pumps are tapped for 1/4" NPTF fitting and comes supplied with two 1/4" NPTM to 3/8" push on hose unions. Also supplied with mounting bracket and bolt, cable connectors, short lengths of hose and hose clips E10-E85 fuel compatible. 12 Volt. 10 - 14psi shut off. 130 litres per hour at free flow with 3/8" ID hose Recommend using PTFE tape on union threads - product code PTFE
High quality low pressure 6V solenoid fuel pump that can be fitted in-line to positive or negative earth systems. For a higher pressure version of this 6V fuel pump, please see part number PFP6 (5 to 8psi) Requires a pre-filter - small unit supplied. A pressure regulator valve is advised if used with early type carburettors. Pumps are tapped for 1/8" NPTF fitting and come supplied with 1/8" NPTM to 5/16" push on hose unions. Also supplied with mounting bracket and bolt, cable connectors, short lengths of hose and hose clips E10-E85 fuel compatible. 6 Volt. 2.5 to 4psi shut off. 90 litres per hour. with 5/16" ID pipe. Recommend using PTFE tape on union threads - product code PTFE
High quality 12V solenoid fuel pump that can be fitted in-line to positive or negative earth systems. For normal requirements for passenger cars, light duty commercials and stationary engines. For a low pressure version of this 12V pump (2.5 to 4.5 psi), please see part number PFP12LP. For a higher pressure version, please see PFP12HP (10 to 14psi) Requires a pre-filter - small unit supplied. A pressure regulator valve is advised if used with early type carburettors. Pumps are tapped for 1/8" NPTF fitting and comes supplied with two 1/8" NPTM to 5/16" push on hose unions. Also supplied with mounting bracket and bolt, cable connectors, short lengths of hose and hose clips E10-E85 fuel compatible. 12 Volt. 5 - 9psi shut off. 110 litres per hour at free flow with 5/16" ID hose Recommend using PTFE tape on union threads - product code PTFE
Brass SU type float lit nut, long type nut for use with overflow pipe. 1/4" BSP female thread.
Cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi. Negative earth systems. Can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. Dimensions :- 135mm x 50mm. Thread 1/4" NPTF. Kit includes, 2 unions and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two. 1/8NPTF female ports. Requires a pre-filter. E10-E85 fuel compatible. 7.0-10psi, 27 gallons per hour, Up to c 200bhp. Recommend using PTFE tape on union threads - product code PTFE
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two. 1/8NPTF female ports. Requires a pre-filter. E10-E85 fuel compatible. 4.0-7.0psi, 27 gallons per hour, up to c 180bhp. Recommend using PTFE tape on union threads - product code PTFE
A very neat electronically-controlled pump housed in a nylon casing and suitable for positive- or negative-earthed 12 volt vehicles - and can be switched between the two. 1/8" NPTF female ports. Requires a pre-filter. E10-E85 fuel compatible. 1.5-4.0psi, 20 gallons per hour, Up to c 150bhp. Recommend using PTFE tape on union threads - product code PTFE
An outstanding, lightweight universal electronic fuel pump with state-of-the-art design that can be used in all carburettor-equipped vehicles and also as a diesel lift pump. Compatible with most fuels. 12v negative earth, draw 2 amps, Flow rate 32 (US) gallons per hour (approximately 26 UK gallons per hour) at 4.0 to 7.0 p.s.i. Two bolt, two wire installation. Small size 85mm x 78mm x 60mm. Inlet and outlet are threaded 1/8" NPTF. All the parts necessary to make a complete installation including inlet filter. Outlet connection is for 5/16 ID flexible hose. It is rated for 6000 hours of performance. The Facet Posi-Flo fuel pump's self-priming capabilities provide up to 12 inches of fuel lift and no extended cranking is necessary to restart the engine if conditions require. Recommend using PTFE tape on union threads - product code PTFE
High quality 12V solenoid fuel pump that can be fitted in-line to positive or negative earth systems. Requires a pre-filter and a pressure regulator valve is advised if used with early type carburettors. Pumps are tapped for 1/8" NPTF fitting and come supplied with 1/8" NPTF 5/16" hose unions. E10-E85 fuel compatible. 12 Volt, 2.5-4.5psi shut off, 100 litres per hour. Recommend using PTFE tape on union threads - product code PTFE
High quality 6V solenoid fuel pump that can be fitted in-line to positive or negative earth systems. For a lower pressure version of this 6V fuel pump, please see part number PFP6LP (2.5 to 5psi) Requires a pre-filter - small unit supplied. A pressure regulator valve is advised if used with early type carburettors. Pumps are tapped for 1/8" NPTF fitting and come supplied with 1/8" NPTM to 5/16" push on hose unions. Also supplied with mounting bracket and bolt, cable connectors, short lengths of hose and hose clips E10-E85 fuel compatible. 6 Volt 5 to 8psi shut off, 96 litres per hour with 5/16" ID hose. Recommend using PTFE tape on union threads - product code PTFE
Cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi. Negative earth only. Can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. Dimentions :- 135mm x 50mm. thread 1/4" NPTF. Kit includes, 2 unions and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Cylindrical fuel pump kit for fast road use (with silver top), delivering fuel at rate of up to 27 gallons per hour at a pressure of 5.0 to 6.0 psi. Negative earth only. Can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. Dimensions :- 135mm x 50mm. thread 1/8" NPTF. Kit ibcludes 2 unions and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Cylindrical fuel pump kit for normal road use (with silver top), delivering fuel at rate of up to 18 gallons per hour at a pressure of 4.0 to 4.5 psi. Negative earth systems only. Can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. Dimensions :- 135mm x 50mm. thread 1/8" NPTF. Kit includes, 2 unions and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Solid state fuel pump kit for fast road use, delivering fuel at rate of up to 18 gallons per hour at a pressure of 5.0 to 6.0 psi.. Negative earth systems only. Must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. Dimensions :- 60mm x 48mm. thread 1/8" NPTF. Kit includes, 2 unions, filter and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Solid state fuel pump kit for competition use, delivering fuel at rate of up to 25 gallons per hour at a pressure of 6.0 to 7.0 psi. Negative earth systems only. Must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. Dimensions :- 60mm x 48mm. thread 1/8" NPTF. Kit includes , 2 unions, filter and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Solid state fuel pump kit for normal road use, delivering fuel at rate of up to 12 gallons per hour at a pressure of 2.5 to 3.0 psi. Negative earth systems only. Must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. Dimensions :- 60mm x 48mm. thread 1/8" NPTF. Kit includes, 2 unions, filter and 2 mounting rubbers. Recommend using PTFE tape on union threads - product code PTFE
Twin point rocker assembly and blade (points) for SU fuel pumps.
PETROL KING Fuel pressure regulator has been designed to improve carburetor feed. Fuel flow is steady and constant at any weather, ambient and driving conditions, thanks to its wide diaphragm inside. A standard fuel pump can deliver a fuel pressure 5 times higher than useful to feed carburetor, causing overload, stalling or starvation of engine and waste of fuel. The PETROL KING regulator avoids these problems reducing and regulating the fuel pressure, giving a better idle and rapid starting. The vehicle will run smoother without loss of performances at high rpm, as the pressure to carburetor will be set for the max engine power, plus additional safety percentage, according to the size of the needle valve. PETROL KING is manufactured with high quality materials. Max in Put Pressure:- 8psi Adjustment Range: - 1.5-5psi Unions: - 8mm Push on tails Suitable for: - Petrol / E10 / E85 & Diesel Width inc Bracket: - 83mm Height:-60mm Weight: - 165gms