Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Index Keywords
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • Show All

Small, flexible/shockproof rubber bodied rear lamp equivalent to the old Rubbolite No.5 model for vintage motorcycles or as an auxiliary rear lamp for small cars. The rubber body is fitted with a single ended, double contact, chrome plated bulb holder that accepts SBC/BA15D bulbs. The rear nut on the holder is removed to expose the terminal contacts. It also features a plastic tail/cable feed through. The lamp features a slotted rubber tab to allow mounting on the edge of sheet metal (e.g. a number plate) up to 2mm thick. Two washers, slotted screw and nut supplied for mounting. 3mm thick acrylic red lens for stop and tail function, clear acrylic side lens for number plate illumination. Supplied without bulb - for bulbs please select 5/21W 6V - B3214A (equal) or 12V B3212A (equal) from the option box. Or for LED options, please see  -  CSTLEDWWR-6N, CSTLEDWWR-6P (6V negative and positive earth respectively) and CSTLEDWWR-12, which are an ideal size for the lamp. A well moulded, durable and compact period lamp. A good, durable alternative to other small rear lamps of the period including the Lucas MT211 and WT203.

Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L564 type. Fitted to many classic motorcycles from BSA, Triumph, Norton in the period c1955-70. Stainless steel base with polycarbonate red lens with integral reflector and clear lined/diffused side lens section. Two bolt fixing with 88mm hole centres. Complete with wire harness finished in bullet terminals. Takes a BAY15D base bulb - 6V part number B384, 12v part number B380. Supplied with 12V bulb as standard. Equivalent to other Lucas part number 53454. 120mm long, 50mm deep from mounting plate, 55mm high

Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens. Originally fitted to many quality cars. Applications include Austin, Morris, Lea Francis and Morgan. Chrome finish to lamp body and plinth. Fitted with chrome on brass 'Toby' medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Three single contact BA15S bulb holders. Bulb holder arrangement provides 'stop and tail' functionality as well as number plate illumination. Also available in black enamel finish - see part number ST52B. Please also see our part number ST52G for spare glass lenses for these and original Lucas ST52 lamps. Uses 3 x BA15s bulbs - 2 x 10w stop light, 1 x 5w side light - for spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v). 12V bulbs supplied as standard. When mounted, the lamp is 116mm maximum long, 53mm high and 57mm deep. 87mm between mounting stud centres (studs complete with nuts).

Ford Model "A" type, all polished stainless steel body and rim, rear stop and tail light with "STOP" script in amber in the red/red glass lens.  Approx. 97mm diameter x 51mm deep. Uses two BA15S bulbs - B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light.

Stop and tail lamp as fitted to Triumph Spitfire Mk I, II and III and GT6 and some Morgan's. Equivalent to Lucas part number L672. Alternative part number 54884. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v).

Superb reproduction stop and tail lamp and reflector, as fitted to AC Cobra and Ace, Jensen 541 and Hillman Minx. Chrome on brass rim. 66mm wide and 124mm long. Equivalent to Lucas Part number L542. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v).

Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type 582. Amber plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Chrome body. We have commissioned production of this lamp to enable older vehicles to comply to more modern traffic conditions, with a larger plastic lens on a period looking flashing indicator lamp. Accepts BA15D indicator/warning bulbs, for spare bulbs please see our B319 (6v) or B335 (12V).

Rear lamp equivalent to the Lucas 529 type. Stop, tail and number plate illumination. Fitted to many motorcycles. Steel base with rubber mounting pad, two piece high quality polycarbonate red lens, with reflector pattern, and ribbed clear lside lens for number plate illumination. Three bolt fixing with 48mm hole centres. Complete with two wire harness finished in bullet terminals with rubber boot into lamp as part of mounting pad. Takes a small globe BAY15D base 21/5w twin filament bulb - 6V part number B3214B/B3214-off, 12v part number B3212B/B3212-off.

A useful rear lamp and good reproduction of the Lucas 477/1 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The large red lens (54mm diameter) has a chrome rim, the black metal body (max 50mm diameter, tapering to 36mm) has side number plate illumination. Double contact bulb holder - so stop/tail bulb compatible. The mounting flange (approx 65mm diameter) has three holes for fixing. It is designed so that the rear portion of lamp, including rubber boot, protrudes behind mounting flange by 37mm. The bulbholder is accessed by twisting off the rear flange body. Fitted with a 12 volt double contact offset pin BAY15D base 21/5 Watt small globe double filament bulb. For spare bulbs please see our B3214B/B3214-off (6v) or B3212B/B3212-off (12v). Wired with bullet terminals. Other equivalent Lucas part number 53182B.

A useful rear lamp and good reproduction of the Lucas MT211 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens (25mm diameter) has a chrome rim, the black metal body (30mm diameter) has side number plate illumination. Double contact bulb holder - so stop/tail bulb compatible. The mounting flange (approx 65mm diameter) has three holes for fixing. It is designed so that the rear portion of lamp, including rubber boot, protrudes behind mounting flange by 37mm. The bulbholder is accessed by twisting off the rear flange body. Fitted with a 12 volt double contact offset pin BAY15D base 21/5 Watt small globe double filament bulb. For spare bulbs please see our B3214B/B3214-off (6v) or B3212B/B3212-off (12v). Wired with bullet terminals. Other equivalent Lucas part number 53056.

Toby black ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR & Number Plate illumination operation. Suitable for 6 or 12V, Negative Earth vehicles. The product features a main, circular RED and AMBER light board with a centre slot that fits over/locates on the vertical partition of the triple bulb holder bolted into the ST38 body. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination. The board is fitted with three BA15S bulb base connectors on 10cm connecting wires. One connection illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second connection illuminates the Stop light (second brightness RED). The third connection illuminates the AMBER indication/turn signal LEDs. The LED board has a very low power requirement and provides great all over lens lighting from 30 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus a good distinction between STOP and TAIL brightness's. Fully assembled and ready to fit. Please note that the indicator function requires use of an electronic flasher unit e.g.12V LEDFLASH3. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Chrome split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function, fitted with an all in one LED light board and split Red/Amber lenses giving Stop, Tail, INDICATOR & number plate illumination operation. On board electronics make this product suitable for 6V &12V vehicles, either Positive or Negative earth. The product features a main, D shaped light board with two sections of LEDs - one RED and one AMBER - that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. The board is fitted with one bulb base BA15D connector on 15cm connecting wires and one BA15S bulb base connector on 10cm connecting wires. One terminal of the BA15D base illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second terminal illuminates the Stop light (second brightness RED). The BA15S connection illuminates the AMBER indication/turn signal LEDs. These boards have a very low power requirement and provide great all over lens lighting from 27 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL brightness's. Fully assembled and ready to fit. Please note that the indicator function requires use of an electronic flasher unit e.g. LEDFLASH3

Black split lens rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. fitted with an all in one LED light board and split Red/Amber lenses giving Stop, Tail, INDICATOR & number plate illumination operation. On board electronics make this product suitable for 6V &12V vehicles, either Positive or Negative earth. The product features a main, D shaped light board with two sections of LEDs - one RED and one AMBER - that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. The board is fitted with one bulb base BA15D connector on 15cm connecting wires and one BA15S bulb base connector on 10cm connecting wires. One terminal of the BA15D base illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second terminal illuminates the Stop light (second brightness RED). The BA15S connection illuminates the AMBER indication/turn signal LEDs. These boards have a very low power requirement and provide great all over lens lighting from 27 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL brightness's. Fully assembled and ready to fit. Please note that the indicator function requires use of an electronic flasher unit e.g. LEDFLASH3

Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V. Supplied as standard with conventional incandescent bulbs - please indicate your required voltage with the drop down box below. There are also LED options that operate with 6, 12 and 24 Volt - please see information below regarding B117LEDWW-A (6 and 12V number plate), B921LEDW-A (6 and 12V indicator) and B383LEDWW or B381LEDWW (6 and 12v stop and tail). Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  These high quality reproduction lamps feature a steel body and back plate with a new moulded split RED and AMBER main plastic lens, plus CLEAR side lens. Two single contact WEDGE T10 capless bulb holders - for Number Plate illumination and Indicator function - and one BA15D holder for 'Stop' and Tail function. We offer this lamp in a choice of black paint or chrome plated finish, both with side number plate illumination window. Supplied complete with 2 x capless T10 base bulbs - 1 x 5w number plate illumination light and 1 x 21W indicator - and 1 x BA15D 21/5w 'stop' and tail. For spare 6V bulbs - please see B501-6V for number plate, B921-6 for indicator and B3214A/B3214-equal for stop and tail. For spare 12V bulbs - please see B501/B501-12V for number plate, B921/B921-12V for indicator and B3212A/B3212-equal for stop and tail. For LED upgrade bulbs please see 'Related Products' below - part numbers B117LEDW-A, B921LEDW-A and B381LEDW which will work with 6, 12 and 24V systems, noting you may need an LED flasher unit e.g. LEDFLASH3 --

Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V. Supplied as standard with conventional incandescent bulbs - please indicate your required voltage with the drop down box below. There are also LED options that operate with 6, 12 and 24 Volt - please see information below regarding B117LEDWW-A (6 and 12V number plate), B921LEDW-A (6 and 12V indicator) and B383LEDWW or B381LEDWW (6 and 12v stop and tail). Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  These high quality reproduction lamps feature a steel body and back plate with a new moulded split RED and AMBER main plastic lens, plus CLEAR side lens. Two single contact WEDGE T10 capless bulb holders - for Number Plate illumination and Indicator function - and one BA15D holder for 'Stop' and Tail function. We offer this lamp in a choice of black paint or chrome plated finish, both with side number plate illumination window. Supplied complete with 2 x capless T10 base bulbs - 1 x 5w number plate illumination light and 1 x 21W indicator - and 1 x BA15D 21/5w 'stop' and tail. For spare 6V bulbs - please see B501-6V for number plate, B921-6 for indicator and B3214A/B3214-equal for stop and tail. For spare 12V bulbs - please see B501/B501-12V for number plate, B921/B921-12V for indicator and B3212A/B3212-equal for stop and tail. For LED upgrade bulbs please see 'Related Products' below - part numbers B117LEDW-A, B921LEDW-A and B381LEDW which will work with 6, 12 and 24V systems, noting you may need an LED flasher unit e.g. LEDFLASH3 --

A super reproduction of the "Owl Eye" rear lamp from Toby - originally for 'stop', tail and reversing function. A quality recreation of the original Lucas type 312B lamp. Chrome plated finish on all brass pressings, supplied with red and clear (as shown) or red and amber main diffused pattern lenses - please select required lens combination from the 'Drop Down' option box. Number plate illumination on underside. Size approx. 152mm wide x 105mm tall x 65mm deep. Please note that the main, large lenses can be interchanged for fitting to the left or right of vehicle. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x BA15D bulbs. For spare bulbs please see our B317 (6v) stop light/indicator/reverse B206 (6v) side light or B335 (12v) stop light/indicator/reverse or B209 (12v) side light. Making Owl-eye Rear Lamps

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B --

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B --

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B --

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B --

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B

Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3. Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs - 6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator. 12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator. --

Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3. Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs - 6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator. 12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator. --

Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3. Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs - 6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator. 12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator. --

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side.

Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. Vintage style cloth braided green and black nylon coated wires. Green wire is stop, black wire is tail, metal housing is earth. 97mm diameter x 51mm deep. Two BA15S single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs, B317 (6v) stop light B205 (6v) side light or B382 (12v) stop light B207 side light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament.

Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm centres. Fitted with two single contact BA15S bulb holders for one 21 watt and one 5 watt bulb - please see B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light.

Early pattern reproduction 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall. Clear side number plate illumination lens. Black coated body with chrome finish base. Uses two BA15S bulbs. For bulbs please see our B317 (6v) or B382 (12v) stop light and B205 (6v) or B207 (12v) for tail/side light.

Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. Vintage style cloth braided green and black nylon coated wires. Green wire is stop, black wire is tail, metal housing is earth. 97mm diameter x 51mm deep. Two BA15S single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs, B317 (6v) indicator B205 (6v) side light or B382 (12v) indicator B207 side light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament.

Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. With number plate illuminator glass lens on bottom side of tail light housing. Vintage style cloth braided green and black nylon coated wires. Green wire is stop, black wire is tail, metal housing is earth. 97mm diameter x 51mm deep. Two BA15S single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs, B317 (6v) indicator B205 (6v) side light or B382 (12v) indicator B207 side light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament.

Stop, Tail and Number Plate Illumination lamp equivalent to the Lucas L525 type. Fitted to Triumph TR2 and TR3 as well as many motorcycles. Chrome plated steel base with polycarbonate red and clear lens with integral reflector. Two bolt fixing with 82mm hole centres. Complete with 3 wire harness finished in bullet terminals with rubber boot into lamp. Takes a BAY15D base bulb - 6V part number B384, 12v part number B380. Equivalent to other Lucas part number 53269A

Replacement acrylic red and white lens (equivalent to Lucas part number 523308) for the Lucas 288-3 rear number plate lamp/light box assembly. The chrome rim, clip, gasket and screw is our part number 177 - currently unavailable. Dimensions 95mm wide x 67mm tall.

Replacement acrylic red lens (equivalent to Lucas part number 523307) for the Lucas 288-3 rear number plate lamp/light box  assembly. For chrome rim, clip, gasket and screw please see our part 177 - currently unavailable. Dimensions 95mm wide x 67mm tall.

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). -- Without number plate side lens.

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). -- Early pattern cylindrical indicator lamp , as Lucas type 582. fitted with amber prismatic lens and screw on metal rim. 45mm dia x 93mm overall, body 42mm dia. - double contact equal pin bulbholder. mounts through 20mm panel hole. offered in black. Accepts BA15d indicator bulb, for spare bulbs please see our B319 (6v) or B335 (12V).

Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type 582. Amber plastic lens 55mm dia, body 58mm long x 42mm diameter, overall length 92mm. Nickel body. We have commissioned production of this lamp to enable older vehicles to comply to more modern traffic conditions, with a larger plastic lens on a period looking flashing indicator lamp. Accepts BA15D indicator bulb, for spare bulbs please see our B319 (6v) or B335 (12V).

A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard (red as an option). Dimensions 63mm wide x 78mm deep - excluding bulb holder. BA15D double contact bulb holder takes equal pin bulbs - please see B319 (6v) or B335 (12v) for indicator function, or B383 (6v) or B381 (12v) (LED options CSTLEDWWR-6 and CSTLEDWWR-12) if used as a stop and tail lamp with a red lens.

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Flush back indicator lamp (without rubber boot. Approximately 72mm diameter rubber back. Stainless steel rim with a choice of plastic or glass lens. Uses a 42mm x 15mm 21 watt festoon bulb. A useful lamp where additional lamps are required, without the need to cut large holes. Two mounting bolts to rear. Offered with amber lens for indicator, red lens for rear stop or tail application or clear lens for side or reverse. For spare bulbs please see our B1240 (6v) or B273 (12v) for indicator, stop or reverse and B258 (12V) for tail, side. --

Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for number plate illumination. Uses a BAY15D bulb - For bulbs, please see our B384 (6v) or B380 (12v). -- with clear side illumination lens.

Toby 'diver's helmet' small tail lamp. 48mm diameter mains glass bulls eye lens, 42mm diameter glass bulls eye side lenses. Overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs. Fitted with riveted Toby medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. These superb lamps are available in polished brass, chrome and nickel, with double contact bulbholder and plug in base. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with three amber lens for indicator use. Please specify your requirement. Requires equal pin BA15D bulbs - for spare bulbs please see our B383 (6v) or B381 (12v) for stop and tail version, B318 (6v) or B335 (12v) for indicators.

Toby 'diver's helmet' rear lamp. With three 52mm diameter glass, bulls eye lenses. Overall lamp diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs. Fitted with riveted 'Toby' medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. These superb lamps are available in polished brass, chrome and nickel, with double contact bulbholder and plug in base. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with three amber lens for indicator use. Please specify your requirement. Requires equal pin BA15D bulbs - for spare bulbs please see our B383 (6v) or B381 (12v) for stop and tail version, B318 (6v) or B335 (12v) for indicators.

Tail lamp assembly with gloss black housing and highly polished stainless steel rim. High quality, all red glass 'reflective' lens with clear side lens for number plate illumination. Uses a BAY15D bulb - for bulbs, please see our B384 (6v) or B380 (12v).

Round rear stop and tail lamp with single flat "reflective" red glass lens. With number plate Illumination with glass lens on bottom side of tail light housing. Highly polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm centres. Fitted with two single contact BA15S bulb holders for one 21 watt and one 5 watt bulb - please see B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light. Vintage style cloth braided green and black nylon coated wires. Green wire is stop, black wire is tail, metal housing is earth. 

Single red lens 'Duolamp'. Polished stainless steel rim, 97mm diameter, polished stainless steel body 60mm deep. One BAY15D (1157) double contact bulbholder. Offered with or without side lens for number plate illumination. Uses a BAY15D bulb - For bulbs, please see our B384 (6v) or B380 (12v). -- without number plate side lens

Gloss black powder coated steel housing and rim. High quality split glass lens with 'STOP' script in upper section. Vintage style cloth braided green and black nylon coated wires. Uses two BA15S bulbs - B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light.

Gloss black powder coated steel housing and rim. Includes number plate light mounted at the bottom of the housing. High quality red, ribbed split glass lens. Vintage style cloth braided green and black nylon coated wires. Uses two BA15S bulbs - B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light.

Gloss black powder-coated steel housing and rim. High-quality all red split glass ribbed lens. Vintage style cloth braided green and black nylon coated wires. Uses two BA15S bulbs - B317 (6v) stop light, B205 (6v) side light or B382 (12v) stop light, B207 side light.

Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. With number plate illuminator glass lens on bottom side of tail light housing. Vintage style cloth braided green and black nylon coated wires. Green wire is stop, black wire is tail, metal housing is earth. 97mm diameter x 51mm deep. Two BA15S single contact bulb holders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for bulbs please see B317 (6v) stop light B205 (6v) side light or B382 (12v) stop light B207 side light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament.

Round ruber lamp equivalent to the Rubbolite number 23 rear lamp - 91mm diameter at widest, with raised red lens and side number plate illumination lens. Fitted with two double contact bulb holders offering various bulb configurations. A very useful lamp into which the user can fit two 21 watt bulbs. Base 73mm diameter (with rear protruding bulb holders) x 74mm deep. Uses BA15D bulbs. For 21W double contact bulbs, please see our B319 (6v) or B335 (12v).

A neat rear lamp equivalent to the Rubbolite No. 25 lamp, with a single mounting point. Can also be supplied with a flat red lens (instead of the domed red lens fitted as standard) to give a lamp of more vintage appearance, into which only small globe (19mm diameter) bulbs will then fit. Double contact bulb holder BA15D. Measures 65mm diameter. Bulb holder wires to rear. Uses BA15D bulbs - for stop and tail application, please see our B383 (6v) or B381 (12v) for the domed lens and B3212-equal or B3214-equal for the flat lens.

Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate illumination. Vintage style cloth braided green and black nylon coated wires. Fully assembled for easy and straight forward replacement. Green wire is stop, black wire is tail, metal housing is earth. Uses a BAY15D bulb - For bulbs, please see our B384 (6v) or B380 (12v). -- with side illumination lens

Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate illumination. Vintage style cloth braided green and black nylon coated wires. Fully assembled for easy and straight forward replacement. Green wire is stop, black wire is tail, metal housing is earth. Uses a BAY15D bulb - For bulbs, please see our B384 (6v) or B380 (12v). -- no side lens

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for spare bulbs please see our B317 (6v) stop/indicator, B205 (6v) side/number plate light or B382 (12v) stop/indicator B207 (12v) side/number plate light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament. --

Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for spare bulbs please see our B317 (6v) stop/indicator, B205 (6v) side/number plate light or B382 (12v) stop/indicator B207 (12v) side/number plate light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament. --

Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable equivalent to the Lucas L494. Clear reverse lamp is Ford part reference 204E-15500.  For bulbs please see our B317 (6v) or B382 (12v). --

Remanufactured L494 type rear lamp. Chrome finish on cast body with chrome plated fittings. Body size 140mm wide x 75mm high x 68mm deep. Mounting stem approx 13mm. bulbholder BA15S. Suitable equivalent to the Lucas L494. Clear reverse lamp is Ford part reference 204E-15500.  For bulbs please see our B317 (6v) or B382 (12v). --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Indicator lamp of vintage appearance, modelled as the equivalent of the Lucas rear lamp type L582. Amber plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Black body. We have commissioned production of this lamp to enable older vehicles comply to more modern traffic conditions, with a larger plastic lens on a period looking flashing indicator lamp. Accepts BA15D indicator bulb, for spare bulbs please see our B319 (6v) or B335 (12V).

Rubber diver's helmet lamp, similar to the Rubbolite Number 8 lamp - approx 70mm diameter body. Supplied with: Red flat main lens, one red side lens and one clear side lens for stop, tail and number plate illumination use. Amber lenses all round for indicator use. SBC BA15D double contact bulbholder fitted, enabling use of double filament bulbs. For bulbs, please see our B383 (6v) or B381 (12v) for stop, tail and number plate illumination and B318 (6v) or B335 (12v) for indicator use. --

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). --

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire connection all surrounded with a rubber seal. Very similar in design to some classic Wipac lights of the sixties, including the 210 type. 12v x 10 watt festoon bulb. Choice of clear lens for a reversing lamp, red lens for an auxiliary rear warning light and amber for indicator function. For spare bulbs please see our B1240 (6v) or B273 (12v). --

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire connection all surrounded with a rubber seal. Very similar in design to some classic Wipac lights of the sixties, including the 210 type. 12v x 10 watt festoon bulb. Choice of clear lens for a reversing lamp, red lens for an auxiliary rear warning light and amber for indicator function. For spare bulbs please see our B1240 (6v) or B273 (12v). --

Practical small polished stainless steel (110mm x 55mm x 28mm deep) lamp with moulded polycarbonate lens. Flush mounting back with two 4.5mm mounting studs at 77mm hole centres and a single wire connection all surrounded with a rubber seal. Very similar in design to some classic Wipac lights of the sixties, including the 210 type. 12v x 10 watt festoon bulb. Choice of clear lens for a reversing lamp, red lens for an auxiliary rear warning light and amber for indicator function. For spare bulbs please see our B1240 (6v) or B273 (12v). --

A useful rear lamp and good reproduction of the Lucas MT110 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens (32mm diameter) has a chrome rim, the black metal body ( 44mm diameter) has side number plate illumination. Double contact bulb holder - so stop/tail bulb compatible. The mounting flange (approx 65mm diameter) has three holes for fixing. It is designed so that the portion of lamp protrudes behind mounting flange by 23mm. The bulbholder is accessed by twisting off the rear flange body. Fitted with a 12 volt double contact equal pin BA15D base 21/5 Watt double filament bulb. For spare bulbs please see our B383 (6v) or B381 (12v). Wired with bullet terminals. Other equivalent Lucas part number 53009.

Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Double contact BA15D equal pin bulbholder. Mounts though 20mm panel hole. Offered in black coated, nickel or chrome plated finish. Uses a BA15D bulb. For conventional bulbs please see our B383 (6v) or B381 (12v), or for LED options please see CSTLEDWWR-6 and CSTLEDWWR-12, designed with this lamp in mind. --

Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Double contact BA15D equal pin bulbholder. Mounts though 20mm panel hole. Offered in black coated, nickel or chrome plated finish. Uses a BA15D bulb. For conventional bulbs please see our B383 (6v) or B381 (12v), or for LED options please see CSTLEDWWR-6 and CSTLEDWWR-12, designed with this lamp in mind. --

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). --

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). --

Angle mounted stop and tail rear lamp equivalent to Lucas L471 type (alternative part number 53200). Glass lens approx 57mm deep, chrome bezel. Base approx 127mm x 62mm. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v).

Rubber body with formed metal mounting bracket with two mounting holes. Ideal for hiding/unobtrusive mounting on older cars. With red lens for a stop and tail light fuction. 48mm Diameter. Uses a BA15D bulb, for spare bulbs please see our B3214-Equal (6v) or B3212- Equal (12v). For LED options please see CSTLEDWWR-6 or CSTLEDWWR-12.

Rear stop and tail lamp equivalent to the L549 type for mounting on to sloping rear wing panel. Red plastic lens. Chrome base plate with flat back rubber mounting pad. Base 85mm x 142mm. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v). Fitted to Triumph TR's, Morgan, MGA etc. 

Recessed stop and tail lamp with rubber boot and body (approx 74mm diameter), chrome rim and red glass lens. 25mm depth from mount panel. As Lucas model L488 with flat lens. Alternative part number 57353. Mounts through 35mm panel hole. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v).

Recessed lamp (approx 72mm diameter) with rubber boot and body, chrome rim and red glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Alternative part number 53564. Panel hole for fixing 35mm. Uses a BAY15D bulb. For bulbs, please see our B384 (6v) or B380 (12v).

1259 type reversing light. Stainless steel body with clear glass lens.  Fitted with a 12 volt 21 watt halogen bulb. W 115mm D 71 mm H 57mm total H 91mm

1259 type rear fog light. Stainless steel body with red glass lens.  Fitted with a 12 volt 21watt halogen bulb. W 115mm D 71 mm H 57mm total H 91mm

Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen bulb 12v x 20 watt - part number B446 (H3-20-12V). Upgrade with  LED lamp H3LED-P65 if required. Choice of - clear lens for a reversing lamp, red lens for an auxillary rear warning lamp and amber lens for indicator. -- Polished stainless steel (110mm x 55mm x 80mm deep) with red polycarbonate lens. Single bolt fixing allows choice of mounting. H3 halogen bulb 12v x 20watt - part number B446.

Ex WD original Butler tail lamp, used on Austin Champ as a blackout side lamp, some motorcycles and vintage Bedford's, supplied in a red oxide finish the lamp is 90mm long x 58mm wide x 50mm tall, with a 14mm dia x 38mm long hollow mounting stud. Fitted with a BA15d small globe double filament bulb. Top cover secured with a slot/hex screw and sealed with a cork gasket, red lens is 22mm in dia and housed in a separate hexagon bezel. Very nice small neat lamp which is comes in its original waxed packaging and will need cleaning.

Toby 'diver's helmet' tail lamp made by ourselves. 52mm lens diameter (all) and overall diameter about 90mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass, bright nickel or chrome finish. Double contact equal pin BA15D bulb holder and plug in base - for spare bulbs please see our B383 (6v) or B381 (12v) for the stop and tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps each fitted with either two red and one clear glass for stop, tail and number plate light service OR alternatively with amber lens all round for indicator use. Please specify the configuration you require. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Toby 'diver's helmet' small tail lamp handmade by ourselves. 48mm mains lens diameter, 42mm side lens diameter and overall lamp diameter about 80mm. Similar to the old CAV, Rotax and Lucas models. Sold in pairs, these superb lamps are available in either polished brass or bright nickel. Double contact bulb holder and plug in base. Requires equal pin BA15D bulbs - for spare bulbs, please see our B383 (6v) or B381 (12v) for stop/tail version, B318 (6v) or B335 (12v) for indicators. We offer these lamps fitted with two red and one clear glass for stop, tail and number plate light service, OR with amber lenses all round for indicator use. Please specify your requirement on order. Fitted with brass, chrome or nickel on brass riveted 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. --

Plated dish reflector to assist with light reflection in rubber divers lamp, overall diameter 55mm with 14mm hole in the centre.

New complete lamp units as fitted to the ford 103E and 104E, comprising of new lens, new base with double contact bulb holder for rear and brake light (12v or 6v bulbs sold separately), new mounting pad and stainless steel machine screws. This lamp has no retaining rim, lamp as fitted to the original car. Sold as a pair (2 assemblies) only.

'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type lamp. Fitted with double contact bulbholder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  Clear side number plate illumination lens. Black coated finish. Uses a BAY15D bulb. For bulbs, please see our B384 (6v) or B380 (12v).

Reproduction 'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type. Fitted with double contact bulb holder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  Clear side number plate illumination lens. Chromium finish. Uses a BAY15D bulb. For bulbs please see our B384 (6v) or B380 (12v).

Angled wing mounting stop/tail lamp, as supplied by the Ford Motor Co. for fitting to the E93A Prefect 1939 - 1948. Supplied as a "ready to fit" lamp, 61mm x 149mm base x 53mm height (not including mounting base). Useful period lamp which has uses for other vehicles. Order small globe bulbs separately. Sold per PAIR.

Rear stop and tail lamp equivalent to Lucas lamp L539.  Alternative part number 53624. Diameter 83 mm. Applications include - Austin, Bentley, Bristol, MG, Riley, Rolls Royce, Rover and Vauxhall. Uses a BAY15D bulb. For bulbs, please see our B384 (6v) or B380 (12v).

Stop and tail lamp with double contact bulb holder equivalent to Lucas type L691/2. Alternative part number 54296. Rim diameter 83 mm. "E" Marked. Applications include Austin Healey, Hillman Imp, AC Cobra, Morgan. Uses a BAY15D bulb. For bulbs, please see our B384 (6v) or B380 (12v).

L539 type clear lensed reverse light or front side lamp/indicator.  Please specify single contact (BA15S) bulb for reversing or twin (BAY15D) contact bulb holder for USA front side light and indicator.  Diameter 83 mm. Application sinclude Austin, Bentley, Bristol, Cobra, MG, Riley, Rolls Royce, Rover, Vauxhall. 

Early pattern 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  Clear side number plate illumination lens, chromium finish. Uses two BA15S bulbs, for spare bulbs please see our B317 (6v) or B382 (12v) for stop light and B205 (6v) or B207 (12v) for side/tail light.

Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. Now available in 6V and 12V. Supplied as standard with conventional incandescent bulbs - please indicate your required voltage with the drop down box below. There are also LED options that operate with 6, 12 and 24 Volt - please see information below regarding B117LEDWW-A (6 and 12V number plate), B921LEDW-A (6 and 12V indicator) and B383LEDWW or B381LEDWW (6 and 12v stop and tail). Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall.  These high quality reproduction lamps feature a steel body and back plate with a new moulded split RED and AMBER main plastic lens, plus CLEAR side lens. Two single contact WEDGE T10 capless bulb holders - for Number Plate illumination and Indicator function - and one BA15D holder for 'Stop' and Tail function. We offer this lamp in a choice of black paint or chrome plated finish, both with side number plate illumination window. Supplied complete with 2 x capless T10 base bulbs - 1 x 5w number plate illumination light and 1 x 21W indicator - and 1 x BA15D 21/5w 'stop' and tail. For spare 6V bulbs - please see B501-6V for number plate, B921-6 for indicator and B3214A/B3214-equal for stop and tail. For spare 12V bulbs - please see B501/B501-12V for number plate, B921/B921-12V for indicator and B3212A/B3212-equal for stop and tail. For LED upgrade bulbs please see 'Related Products' below - part numbers B117LEDW-A, B921LEDW-A and B381LEDW which will work with 6, 12 and 24V systems, noting you may need an LED flasher unit e.g. LEDFLASH3

Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3. Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs - 6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator. 12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator.

Toby chrome ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR Number Plate illumination operation. Suitable for 6 or 12V, Negative Earth vehicles. The product features a main, circular RED and AMBER light board with a centre slot that fits over/locates on the vertical partition of the triple bulb holder bolted into the ST38 body. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination. The board is fitted with three BA15S bulb base connectors on 10cm connecting wires. One connection illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second connection illuminates the Stop light (second brightness RED). The third connection illuminates the AMBER indication/turn signal LEDs. The LED board has a very low power requirement and provides great all over lens lighting from 30 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus a good distinction between STOP and TAIL brightness's. Fully assembled and ready to fit. Please note that the indicator function requires use of an electronic flasher unit e.g.12V LEDFLASH3 Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for spare bulbs please see our B317 (6v) stop/indicator, B205 (6v) side/number plate light or B382 (12v) stop/indicator B207 (12v) side/number plate light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament.

Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens. Originally fitted to many quality cars. Applications include Austin, Morris, Morgan and Lea Francis. Gloss black enamel finish to lamp body and plinth. Fitted with chrome on brass 'Toby' medallion. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Three single contact BA15S bulb holders. Bulb holder arrangement provides 'stop and tail' functionality as well as number plate illumination. Also available in chrome plated finish - see part number ST52C. Please also see our part number ST52G for spare glass lenses for these and original Lucas ST52 lamps. Uses 3 x BA15s bulbs - 2 x 10w stop light, 1 x 5w side light - for spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v). 12V bulbs supplied as standard. When mounted, the lamp is 116mm maximum long, 53mm high and 57mm deep. 87mm between mounting stud centres (studs complete with nuts).

Round Toby vintage rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a red glass lens. Three single contact bulb holders. We offer this lamp in a choice of gloss black or chrome plated finish, with and without side number plate illumination lens. We also offer black body with chrome rim and side lens. Mounting studs to rear centre to centre = 59mm. Fitted with chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell's high quality 'Toby' branded product range. Supplied with  3 x BA15S bulbs - 2 x 10w stop light, 1 x 5w side light - please select voltage in option box. For spare bulbs please see B244 (6v) & B205 (6v) or B245 (12v) & B207 (12v), or newly available LED options. We now also offer a Toby reproduction of the ST52 type rear lamp originally made by Lucas, an attractive addition to the lamp range and particularly suitable for fitting centrally over the numberplate - available in chrome  ST52C or gloss black enamel finish ST52B --

Legal version of our very popular vintage lamp equivalent to the Lucas 582 type with stop, tail and side number plate illumination functions. Large red plastic lens 55mm diameter, body 58mm long x 42mm diameter, overall length 92mm. Double contact BA15D equal pin bulbholder. Mounts though 20mm panel hole. Offered in black coated, nickel or chrome plated finish. Uses a BA15D bulb. For conventional bulbs please see our B383 (6v) or B381 (12v), or for LED options please see CSTLEDWWR-6 and CSTLEDWWR-12, designed with this lamp in mind. --

Polished stainless steel body (110mm x 55mm x 80mm deep) with polycarbonate lens. Single bolt fixing allows choice of mounting. Ball joint mounting with spring washer and fixing nut. H3 halogen bulb 12v x 20 watt - part number B446 (H3-20-12V). Upgrade with  LED lamp H3LED-P65 if required. Choice of - clear lens for a reversing lamp, red lens for an auxillary rear warning lamp and amber lens for indicator. -- Polished stainless steel (110mm x 55mm x 80mm deep) with clear polycarbonate lens. Single bolt fixing allows choice of mounting. H3 halogen bulb 12v x 20watt - part number B446.

Toby vintage round rear lamp, equivalent to the original Lucas ST38 or 'Pork Pie' type lamp. Now available in 6 and 12 Volt. Supplied as standard with capless bulbs - please select the voltage you require from the drop down box below. LED upgrade bulb pack also available for 6, 12 and 24V application - please select below or see part number CA1249LEDBK, noting that you may also need an LED flasher unit e.g. LEDFLASH3. Converted for combined stop, tail, number plate illumination and indicator/turn signal function. 90mm diameter x 65mm deep. These high quality reproduction lamps feature a brass body and rim with a high quality split RED and AMBER main plastic lens plus optional CLEAR side lens. Three single contact WEDGE T10 capless bulb holders. We offer this lamp in a choice of gloss black enamel or chrome plated finish, with and without side number plate illumination window. Fitted with chrome on brass 'Toby' medallion as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Uses 3 x capless T10 base bulbs - 1 x 5w tail light, 1 x 21w stop light, 1 x 21W indicator. For spare conventional bulbs - 6 Volt - Please see B501-6V for tail light/number plate illumination and B921-6 for stop light and indicator. 12 Volt - Please see B501/B501-12V for tail light/number plate illumination and B921/B921-12 for stop light and indicator. --

Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for spare bulbs please see our B317 (6v) stop/indicator, B205 (6v) side/number plate light or B382 (12v) stop/indicator B207 (12v) side/number plate light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament. --

Round rear lamp with split glass lens. Polished stainless steel, embossed DUOLAMP. 97mm diameter x 51mm deep. Two single contact bulbholders fitted through back, mounting screw hole centres 45mm. Uses BA15S bulbs - for spare bulbs please see our B317 (6v) stop/indicator, B205 (6v) side/number plate light or B382 (12v) stop/indicator B207 (12v) side/number plate light. These lamps can be upgraded with part number 211-CONV which converts the bottom bulb holder to a double contact BAY15D fitting - allowing use of a twin filament bulb behind the lower red section of the main lens, providing stop, tail and number plate light functions, leaving the upper amber section for indicator/turn signal function for red/amber lensed lamps. For red/red lensed lamps, either the tail or stop function can be doubled up with the extra filament. --

Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side number plate illumination in indicator configuration, when fitted with an amber glass lens. Screw on metal rim. 45mm diameter x 93mm overall, body 42mm diameter. BA15D double contact equal pin bulb holder. Mounts through a 20mm panel hole. Offered in black or nickel or chrome plated finish. For spare stop and tail bulbs please see B381 (12V) and B383 (6V), or LED equivalents designed for these lamps CSTLEDWWR-6 and CSTLEDWWR-12. For spare indicator bulbs please see our B319 (6v) or B335 (12V). -- Without number plate side lens.