Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required.
Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --
Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --
Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --
Tandem wiper assembly, chrome of nickel plate finish, of the pre-war pattern, with the tightening nut forward (to front). Arms adjustable 125mm to 190mm in length and will fit 3/16" or 1/4" drive shaft using coned collets (supplied), link bar adjustable 350mm to 650mm. Requires slot type blade - with blade held in place by rubber peg 372 or 372A. Please select you finish from the option box below.
Slave/idle wiper arm pivot, shaft size 3/16" diameter, bolts through 8mm hole in screen, for use with centre drive dual/tandem wiper sets. Chrome plated as standard, though we also offer nickel finish if required - please select your option below. Plated two part brass and steel assembly with circlip.
Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --
Double arm, driven at end, tandem wiper assembly. Post war pattern (tightening nut at rear (to back) offered in chrome finish only. Arms adjustable 125mm to 190mm long. Link bar adjustable from 350mm to 650mm long. Arms will fit 3/16" or 1/4" drive shaft (removeable inner sleeves/ferrules). End fitting for slot type wiper blades (e.g. 370) secured with a rubber peg (372 or 372A) to be ordered separately.
Stainless steel tandem wiper link bar kit, ideal for operating two wiper arms/blades if only one wheel box is powered. Existing wiper arms need to be drilled, fitting the brackets with rivets supplied. The kit comprises centre hollow tube (260mm long) with end ferrules fitted with slot headed screws, two side adjusting rods (178mm long) with drilled trunnions, two wiper arm brackets and six rivets. Adjusts between 310mm to 595mm.
Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required.
Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --