Vintage Car Parts

Orderline: +44 (0)1684 212882

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Index Keywords
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • Show All

Brass Boa Constrictor horn with small trumpet. This is a fantastic, authentic reproduction of the inside or under-bonnet Boa Constrictor horn. The overall length of this super horn is just over 6 feet (approx 1850mm). The horn features our large. 90mm diameter horn bulb, brass horn reed, brass eared mount (with 4.75mm diameter mounting holes at 57mm hole centres), tapered brass flexible horn tube, brass collar with riveted 'Boa Constrictor Horn' badge, flared lost wax cast brass elbow finished with a machined brass ring securing the brass fly screen mesh.  The brass collar is fitted with a soldered and screwed cast saddle mount, attached to a 4" long L shaped mounting bracket with an interlocking taper and domed nut connection. The L shaped mounting bracket base has an undrilled brass casting that can be drilled to suit at up to 60mm hole centres. While this attractive horn was often originally mounted under bonnet it can also be mounted externally. The tapered flexible horn tube can be bent into the position required, though should not be twisted relative to the collar. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well-made reproduction item. We offer this horn in polished brass or nickel plated finish, complete with Boa Constrictor horn badge as original. A super recreation, faithfully reproduced from an original pattern and made in Britain. -- Nickel plated brass Boa Constrictor horn with small trumpet. All brass components, in nickel plated finish.

Brass Boa Constrictor horn with large trumpet and clip on fly mesh. This is a super reproduction of the of the large flared trumpet Boa Constrictor horn, faithfully rerpoduced from an original pattern. This horn was a popular alternative to the snake's head horn and has been unavailable for many years. The overall length of this reproduction horn is over 6 feet, at 1925mm. The horn features our large, 90mm diameter horn bulb, brass horn reed, brass eared mount (with 4.75mm diameter mounting holes at 57mm hole centres), tapered brass flexible horn tube, brass collar, flared lost wax cast brass elbow finished with a spun brass 8" diameter trumpet with clip on spun brass fly mesh screen. The trumpet features a riveted 'Boa Constrictor Horn' badge as original.  The main 8" diameter trumpet section and clip on fly mesh guard surround is hand spun, with the brash fly mesh secured in the rear of the guard by another brass spinning, again as original. Three brass clips - two hanging and one folding - secure the guard in place on the horn trumpet rim. The brass collar is fitted with a soldered and screwed cast saddle mount, attached to a 4" long L shaped mounting bracket with an interlocking taper and domed nut connection. The L shaped mounting bracket base is an undrilled brass casting that can be drilled to suit at up to 60mm hole centres. This very attractive horn was for external mounting as an alternative to the snake's head horn. The tapered flexible horn tube can be bent into the position required, though should not be twisted relative to the collar. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well-made reproduction item. We offer this horn in polished brass or nickel plated finish, complete with Boa Constrictor horn badge as original. A super recreation, faithfully reproduced from an original pattern and made in Britain. -- Nickel plated brass Boa Constrictor horn with large, 8" diameter trumpet and clip on fly mesh screen. All brass components, in nickel plated finish.

Brass Boa Constrictor horn with small trumpet. This is a fantastic, authentic reproduction of the inside or under-bonnet Boa Constrictor horn. The overall length of this super horn is just over 6 feet (approx 1850mm). The horn features our large. 90mm diameter horn bulb, brass horn reed, brass eared mount (with 4.75mm diameter mounting holes at 57mm hole centres), tapered brass flexible horn tube, brass collar with riveted 'Boa Constrictor Horn' badge, flared lost wax cast brass elbow finished with a machined brass ring securing the brass fly screen mesh.  The brass collar is fitted with a soldered and screwed cast saddle mount, attached to a 4" long L shaped mounting bracket with an interlocking taper and domed nut connection. The L shaped mounting bracket base has an undrilled brass casting that can be drilled to suit at up to 60mm hole centres. While this attractive horn was often originally mounted under bonnet it can also be mounted externally. The tapered flexible horn tube can be bent into the position required, though should not be twisted relative to the collar. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well-made reproduction item. We offer this horn in polished brass or nickel plated finish, complete with Boa Constrictor horn badge as original. A super recreation, faithfully reproduced from an original pattern and made in Britain. -- Polished brass Boa Constrictor horn with small trumpet.

Brass Boa Constrictor horn with large trumpet and clip on fly mesh. This is a super reproduction of the of the large flared trumpet Boa Constrictor horn, faithfully rerpoduced from an original pattern. This horn was a popular alternative to the snake's head horn and has been unavailable for many years. The overall length of this reproduction horn is over 6 feet, at 1925mm. The horn features our large, 90mm diameter horn bulb, brass horn reed, brass eared mount (with 4.75mm diameter mounting holes at 57mm hole centres), tapered brass flexible horn tube, brass collar, flared lost wax cast brass elbow finished with a spun brass 8" diameter trumpet with clip on spun brass fly mesh screen. The trumpet features a riveted 'Boa Constrictor Horn' badge as original.  The main 8" diameter trumpet section and clip on fly mesh guard surround is hand spun, with the brash fly mesh secured in the rear of the guard by another brass spinning, again as original. Three brass clips - two hanging and one folding - secure the guard in place on the horn trumpet rim. The brass collar is fitted with a soldered and screwed cast saddle mount, attached to a 4" long L shaped mounting bracket with an interlocking taper and domed nut connection. The L shaped mounting bracket base is an undrilled brass casting that can be drilled to suit at up to 60mm hole centres. This very attractive horn was for external mounting as an alternative to the snake's head horn. The tapered flexible horn tube can be bent into the position required, though should not be twisted relative to the collar. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well-made reproduction item. We offer this horn in polished brass or nickel plated finish, complete with Boa Constrictor horn badge as original. A super recreation, faithfully reproduced from an original pattern and made in Britain. -- Polished brass finish Boa Constrictor horn

A quality reproduction single twist motor bugle horn used on a number of early cars and motorcycles. Approximately 16" long overall, supplied with rubber horn bulb and gauze over front grill opening. We offer this item in polished brass only.

Reproduction bell fronted, curved brass horn for vintage cars and bicycles. 8" turn diameter. 2 3/4" bell diameter, 15" overall length ingluding horn bulb. 4" horn bulb diameter. 2 1/2" long, 11/16" diameter parallel section in front of horn bulb for bracket fitting. We offer this item in polished brass only.

Reproduction bell fronted, straight brass horn. Very similiar to the Lucas No.40, Desmo No.13 and Stadium No.112D motorcycle horns. 4" diameter horn bulb. 14" overall length. 2" long, 11/16" diameter parallel section in front of horn bulb for bracket fitting. We offer this item in polished brass only.

Large snake or serpent headed horn/trumpet. Overall length of this reproduction Boa Constrictor horn is approx 1750mm. The serpent head is pressed (rather than a casting), has glass eyes and forked tongue. The tapered flexible tube ends with the rubber horn bulb supplied. The lost wax cast brass mounting brackets at either end allow fixing. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well made reproduction item. We offer this horn in polished brass or nickel. -- Nickel finish

Large snake or serpent headed horn/trumpet. Overall length of this reproduction Boa Constrictor horn is approx 1750mm. The serpent head is pressed (rather than a casting), has glass eyes and forked tongue. The tapered flexible tube ends with the rubber horn bulb supplied. The lost wax cast brass mounting brackets at either end allow fixing. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well made reproduction item. We offer this horn in polished brass or nickel.

Fine woven brass mesh (wire cloth). Size 30 no. mesh - 0.3mm wire diameter, 0.6mm aperture (567 microns). Ideal for horn mesh or coarse oil/fuel filter screen. Sold in 6" squares (150mm x 150mm).

High quality, British made, tapered brass flexible horn tube for repair of Boa Horns. 1500mm long. Inside diameters - 59mm large end for solder connection to Boa head, 16.5mm small end for solder connection to horn bulb tube. Wall thickness approx 2.5mm. Please note this product incurs an oversize shipping fee.

Reproduction of the Lucas No.38 double twist motor bugle horn. Approx 500mm long overall, supplied with rubber horn bulb, mounting bracket and gauze over front opening. Very similar to many variations used in the 1920's period. Fitted with mounting flange. We offer this item in polished brass only.

923 - Horn reed

From £0.00 (exc. VAT)

Brass horn reed, threaded end, approx 13.5mm diameter x 65mm long.

Large snake or serpent headed horn/trumpet. Overall length of this reproduction Boa Constrictor horn is approx 1750mm. The serpent head is pressed (rather than a casting), has glass eyes and forked tongue. The tapered flexible tube ends with the rubber horn bulb supplied. The lost wax cast brass mounting brackets at either end allow fixing. Original examples of this horn are now extremely rare, and we are pleased to be able to offer this well made reproduction item. We offer this horn in polished brass or nickel. -- Polished brass finish